5,7′-(亚甲胺基)-二-8-羟基喹啉的合成及其理论研究

以4-甲基苯磺酸作催化剂、用三乙胺调节pH值约为9的条件下, 由5-甲酰基-8-羟基喹啉和5-氨基-8-羟基喹啉合成了新的5,7′-(亚甲胺基)-二-8-羟基喹啉, 利用IR, UV, ¹H NMR, MS确认了分子结构, 比较研究了其光致发光特性, 运用Gaussian 98量子化学程序包, 采用B3LYP密度泛函(DFT)的方法, 在6-31G(d,p)水平上对分子的几何构型进行结构优化; 并对目标化合物的稳定结构通过计算预测其振动光谱, 计算结果与实验值基本相符.     

H2CCF自由基与HNCO反应机理的理论研究

采用密度泛函理论的B3LYP方法, 在6-311＋＋G(d,p)基组水平上研究了H₂CCF自由基与HNCO的微观反应机理, 优化了反应过程中的反应物、中间体、过渡态和产物, 为了获得更精确的能量信息, 还在QCISD(T)/6-311＋＋G(d,p)基组水平上计算了各物质的能量．振动分析结果和IRC分析结果证实了中间体和过渡态的真实性, 计算所得的成键临界点电荷密度的变化也确认了反应过程．对于H₂CCF自由基与HNCO反应, 我们找到了六条可行的反应通道, 结果分析表明通道H₂CCF＋HNCO→IM3→TS5→H₂CCFH＋NCO控制步骤活化能最低, 是该反应的主要通道, 在此反应过程中有稳定的氢键复合物IM3生成, 还表现出氢原子迁移的反应特征．     

典型钙/镁基吸附剂对二氧化硒吸附特性研究

针对钙/镁基矿物吸附剂的主要组分CaO、CaCO₃、MgO在500-800 ℃下对Se的吸附特性进行研究，并选取天然矿物方解石、白云石研究其对Se的吸附效果，且对矿物煅烧所得CaO进行吸附实验。结果表明，三种组分中CaO的吸附效果最佳，800 ℃时单位质量CaO对Se的吸附量可达368 mg/g。CaCO₃对Se的吸附在700 ℃时效果最佳且其吸附产物的热稳定性较好。镁基吸附剂仅在中温段对Se具有一定吸附效果。方解石对Se的吸附效果随温度变化趋势与CaCO₃相似，因其较好的孔隙结构，吸附效果略优于CaCO₃。煅烧方解石得到的F-sor对Se的吸附效果优于CaO和CaCO₃煅烧得到的C-sor，这与其良好的比表面积、孔隙结构与抗烧结能力有关，且F-sor吸附产物的热稳定性相对较好。F-sor对Se的吸附量最高可达403 mg/g。     

硼掺杂还原态氧化石墨烯催化剂的制备及其蒽催化加氢性能的研究

制备了一系列硼掺杂的还原氧化态石墨烯催化剂并应用于蒽加氢反应。结果表明，随着催化剂处理温度的升高，催化剂中有序碳结构会发生变化，硼会取代材料骨架中的碳，进而影响蒽和氢气的吸附活化。经硼改性后，催化剂对蒽加氢反应表现出了很高的加氢活性，蒽的最高转化率可达97%，深度加氢产物八氢蒽的最高选择性可达19%。     

IIB族金属二硫代氨基甲酸配合物的合成、表征及热稳定性研究

在甲醇溶液中合成了一系列IIB过渡金属Zn(II), Cd(II)的二羟乙基二硫代氨基甲酸[(EtOH)₂dtc]的配合物, 并对配合物M[(EtOH)₂dtc]₂L [M＝Zn (1), Cd (2), L＝2,2'-联吡啶; M＝Zn (3), Cd (4), L＝邻菲啰啉]进行了红外光谱、元素分析、热重分析表征工作. 热重分析表明配合物1～4中DTC配体比中性配体更易失去, 热分解最终产物为相应的氧化物. 对化合物1, 2做了X-ray单晶衍射分析, 1为单斜晶系, P2₁/c空间群, 晶胞参数a＝0.72146(5) nm, b＝2.61720(18) nm, c＝1.59438(11) nm,b＝97.899(2)°, V＝2.9820(4) nm³, Z＝4, m＝1.133 mm^－1, D_c＝1.297 Mg•m^－3; 2为三斜晶系, P-1空间群, 晶胞参数a＝1.0075(2) nm, b＝1.1580(2) nm, c＝1.1777(2) nm, a＝70.92(3)°, b＝85.71(3)°, γ＝81.02(3)°, V＝1.2822(4) nm³, Z＝2, m＝2.118 mm^－1, D_c＝1.630 Mg•m^－3.     

UO22＋•nH2O和PuO22＋•nH2O (n＝2, 4, 5, 6)密度泛函理论研究

首先用密度泛函理论(DFT)方法研究了铀酰和钚酰离子的几何与电子结构, 计算结果与实验基本符合, 表明DFT方法也能用于含铀和钚重原子的化合物计算. 然后对铀酰和钚酰水合离子的几何构型、Mulliken集居数分布以及铀酰(钚酰)与配体水分子的结合能进行计算, 计算结果表明UO₂^2＋•5H₂O和PuO₂^2＋•5H₂O分别为铀酰和钚酰系列水合离子中最稳定的配合物.     

方酸染料在远红光区／近红外区对纳米晶二氧化钛电极的高效敏化作用

Four para-dialkylaminophenyl （PDAAP1-PDAAP4） bearing carboxyl groups were studied for application to the dye-sensitized solar cells （DSC）. It was found the short spacer CH2 between carboxyl and dialkylaminophenyl chromophore in PDAAP3 and PDAAP4 led to highly efficient monochromatic incident photon-to-current conversion efficiencies （IPCE）, however the long alkyl group C4H9 attached on aniline moieties in PDAAP2 and PDAAP4 favored improvement of open-circuit photovoltage. Thus, the solar cell sensitized by PDAAP4, having both short carboxyl groups CH2COOH and long alkyl groups C4H9, exhibited the IPCE maximum of 73% at 670 nm and overall energy conversion efficiency η of 3.06%, representing the highest IPCE and η values so far in dialkylaminophenyl-based organic dye-sensitized semiconductor solar cells. Taking advantage of the highly efficient sensitizing ability of PDAAP4 in far-red region, the data of IPCE above 630 nm of the solar cells were improved greatly by cosensitization with both N3 and PDAAP4. The influences of the TiO2 film thickness and the concentration of 4-tert-butylpyridine （TBP） in electrolyte were also investigated.     

3-氨基环己基甲酸和cis-3-氨基环己烯基-5-甲酸立体异构体的合成

通过手性胺拆分方法，从3-环己烯基甲酸出发分别合成得到了3-氨基环己基甲酸（ACHC）的四个立体异构体，以及cis-5-氨基-3-环己烯基甲酸（ACHEC）的二个立体异构体。     

铁氰化锰修饰玻碳电极的制备及其电化学性能

A thin film of manganese hexacyanoferrate （MnHCF） was electrochemically formed on a glassy carbon （GC） electrode to prepare a chemically modified electrode （CME）. The mechanism of film formation of MnHCF and its growth process were investigated in detail by cyclic voltammetry. The results show that the stoichiometric composition of MnHCF is Mn^ⅢFe^Ⅲ（CN）6, an analogue of prussian yellow. There exist three clear-cut stages in the whole modification process and the last stage is indispensable to the fabrication of homogenized, stable MnHCF film and must last for an appropriate time. The surface morphology of MnHCF/GC electrode was characterized by scanning electron microscopy （SEM）, which further verified the effective deposition of MnHCF film on GC. The kinetic constants of MnHCF/GC electrode process were also evaluated. The resulting MnHCF film modified electrode presented good stability and high electrocatalytic activity toward the oxidation of H2O2, indicating that MnHCF film possesses function of catalase and can be expected for analytical purposes.     

红外光谱法研究LB膜中的分子取向

The structure information of orientation and packing of molecular chains can be obtained from infrared transmission and reflection-absorbance (RA) spectra. In the present paper, on the basis of Umemura et al., their FORTRAN program of minicomputer was developed and can be run on 486 personal computer. By comparison of infrared transmission and RA intensities, surface enhancement factors and molecular orientation angle were calculated using the above program, and the influence of complex refractive index, angle of incidence, and thickness of LB film were discussed. These results are consistent with that of Umemura et al.