Au core-PtAu alloy shell nanowires for formic acid electrolysis

Inefficient electrocatalysts and high-power consumption are two thorny problems for electrochemical hydrogen(H2)production from acidic water electrolysis.Herein we report the one-pot precise synthesis of ultrafine Au core-Pt Au alloy shell nanowires(Au@PtxAu UFNWs).Among them,Au@Pt_0.077 Au UFNWs exhibit the best performance for formic acid oxidation reaction(FAOR)and hydrogen evolution reaction(HER),which only require applied potentials of 0.29 V and-22.6 m V to achieve a current density of 10 m A cm^-2,respectively.The corresponding formic acid electrolyzer realizes the electrochemical H2 production at a voltage of only 0.51 V with 10 m A cm^-2 current density.Density functional theory(DFT)calculations reveal that the Au-riched Pt Au alloy structure can facilitates the direct oxidation pathway of FAOR and consequently elevates the FAOR activity of Au@Pt_0.077 Au UFNWs.This work provides meaningful insights into the electrochemical H₂ production from both the construction of advanced bifunctional electrocatalysts and the replacement of OER.     

Layered Ag-graphene films synthesized by Gamma ray irradiation for stable lithium metal anodes in carbonate-based electrolytes

Lithium metal batteries are considered as high energy density battery systems with very promising prospects and have bee n widely studied.However,The uncon trollable plating/strippi ng behavior,infinite volume change and den drites formation of lithium metal anode restrict the applicati on.The unc on trolled n ucleati on of lithium caused by the non uniform multi-physical field distributions,can lead to the undesirable lithium deposition.Herein,a graphene composite uniformly loaded with Ag nano-particles(Ag NPs)is prepared through a facile Gamma ray irradiation method and assembled into self-supported film with layered structure(Ag-rGO film).Whe n such film is used as a lithium metal an ode host,the uncontrolled deposition is converted into a highly nucleation-induced process.On one hand,the Ag NPs distributed between the in terlayers of graphe ne can preferentially induce lithium nu cleati on and en able uniform deposition morphology of lithium between interlayers.On the other hand,the stable layered graphene structure can accommodate volume change,stabilize the interface between anode and electrolyte and inhibit dendrites formation.Therefore,the layered Ag-rGO film as anode host can reach a high Coulombic efficiency over 93.3% for 200 cycle(786 h)at a current density of 1 mA cm^-2 for 2 mAh cm^-2 in carbonate-based electrolyte.This work proposes a facile Gamma ray irradiation method to prepare metal/3D-skeleton structure as lithium anode host and demonstrates the potential to regulate the lithium metal deposition behaviors via manipulating the distribution of lithiophilic metal(e.g.Ag)in 3D frameworks.This may offer a practicable thinking for the subsequent design of the lithium metal anode.     

中国纤维素乙醇技术的研究进展

中国面临着严重的能源短缺和环境污染问题,中国政府正在局部几个省份内政策性鼓励燃料乙醇生产和使用.尽管当前主要是用玉米和谷物作为生产乙醇的原料,然而中国具有大量潜在的低成本的纤维素生物质原料,可以极大地扩大乙醇的产量,降低原料成本.近20年来,由于技术的革命性进步,已使得纤维素乙醇的生产成本从4美元/加仑以上,降低至约1.2-1.5美元/加仑.其中,每吨生物质约44美元.因此,目前乙醇掺汽油具有十分强的市场竞争力.已有几个公司正在建造首批商业纤维素乙醇工厂,虽然这些刚起步的小型设施在合理利用和管理上风险较小,但规模经济需要较大型工厂.尽管配送生物质原料的成本会随需求的增加而增加,但在乙醇生产基础上的生物精炼技术的发展,尤其是化工产品和动力的协同生产,将会使全过程的经济可行性大大提高.进一步深入的基础研究,将解决低成本下实现纤维素的完全利用,以确保在无政策性补贴的前提下,真正使纤维素乙醇成为具有市场竞争力的低成本纯液体燃料.     

Binary ligand strategy toward interweaved encapsulation-nanotubes structured electrocatalyst for proton exchange membrane fuel cell

Hierarchically porous architecture of ir on-nitroge n-carb on(Fe-N-C)for oxyge n reducti on reaction(ORR)is highly desired towards efficient mass transfer in the fuel cell device manner.Herein,we reported a binary ligand strategy to prepare zeolitic imidazolate frameworks(ZIFs)-derived precursors,wherein the addition of secondary ligand endows precursors with the capabilities to transform into porously interweaved encapsulation-nanotubes structured composites after calcination.The optimal catalyst,i.e.,termed as Fe₆-M/C-3,exhibits excellent durability with 88.8%current retention after 50,000 seconds in 0.1 M HClO₄solution by virtue of nanoparticles-encapsulation features,which is more positive than the benchmark commercial 20 wt%Pt/C catalyst.Moreover,a promising maximum power density of Fe₆-M/C-3 as cathode catalyst was also dem on strated in proton exchange membrane fuel cells(PEMFCs)measurements.Therefore,this binary ligand approach to the fabrication of hierarchically porous structures would also have significant implications for various other electrochemical reactions.     

Molten salt as ultrastrong polar solvent enables the most straightforward pyrolysis towards highly efficient and stable single-atom electrocatalyst

Currently,pyrolysis as the most widely used method still has some key issues not well resolved for synthesis of carbon-supported single-atom catalysts(C-SACs),e.g.,the sintering of metal atoms at high temperature as well as the high cost and complicated preparations of precursors.In this report,molten salts are demonstrated to be marvellous medium for preparation of C-SACs by pyrolysis of small molecular precursors(ionic liquid).The ultrastrong polarity on one hand establishes robust interaction with precursor and enables better carbonization,resulting in largely enhanced yield.On the other hand,the aggregation of metal atoms is effectively refrained while no nanoparticle or cluster is formed.By this strategy,a C-SAC with atomically dispersed Fe-N₄ sites and a high specific area over 2000 m² g^-1 is obtained,which illustrates high ORR activity in both acid and alkaline media.Moreover,this SAC exhibits superior methanol tolerance and stability after acid soaking at 85℃ for 48 h.It is believed that the molten-salts-assisted pyrolysis can be developed into a routine strategy as it not only can largely simply the synthesis of C-SACs,but also can be extended to prepare other types of SACs.     

镧对Mg-Si合金中Mg2Si相变质的影响

研究了Mg-5Si合金中La的添加对初生Mg2Si相变质的影响。结果表明,适量的La能够有效地变质初生Mg2Si相。基于本文的研究,在添加约0.5%La时,获得了最佳的变质效果,此时,初生Mg2Si相的尺寸减小到25μm以下,其形态从粗大的树枝形状变为多面体形状。然而,当La增加到0.8%或者更高时,初生Mg2Si相又生长为粗大的树枝形态。而且,在凝固过程中发现形成了一些LaSi2化合物,这些化合物的数量随着La的增加而呈现逐渐增加的趋势。     

电感耦合等离子体质谱法测定天然水体中19种元素

建立STD/KED模式-电感耦合等离子体质谱（ICP-MS）法同时测定天然水体中铍、硼、钛、钒、铬、锰、钴、镍、铜、锌、钼、镉、锑、钡、铊、铅、铁、砷和硒19种元素的分析方法。仪器调谐校准后,样品在线加入锂、钪、铑、铋校准溶液校正,以标准曲线内标法定量分析。标准曲线相关系数均大于0.999,样品加标回收率为92.6%～103.6%,质控样品测定值相对标准偏差为0.20%～2.6%(n=6),方法检出限为0.01～0.70μg/L。该方法灵敏度高,操作简便,节省人力,能满足天然水体中19种元素的同时检测需要。     

电解质-非电解质混合溶液活度系数的关联及溶解的推算 II:NH3-NaCl-Na2SO4-H2O体系的液固平衡热力学

由于在研究的体系中, Na2SO4是非对称电解质, 且能生成水合盐, 故推导了由非对称型电解质与非电解质所构成的混合溶液的各组分的活度系数关联通式, 并在此基础上讨论了水合盐液固平衡的计算方法.     

黄花棘豆化学成分的研究II:两种三萜皂苷的结构

从黄花棘豆的总皂苷中分离出两个新皂苷1和2.经光谱分析及化学方法确证,1为3-O-[α-L-鼠李吡喃糖基(1→2)-β-D-葡萄吡喃糖基(1→4)-β-D-葡萄吡喃糖醛酸基]-黄豆醇B;2为3-O-[α-L-鼠李吡喃糖基(1→2)-α-L-阿拉伯吡喃糖基(1→4)-β-D-葡萄吡喃糖醛酸基]-黄豆醇B.     

二氧化钛纳米管的研究进展

二氧化钛纳米管由于其新奇的光电、催化、气敏等性能引起了广泛的关注,在太阳能电池、光催化、环境净化、气体传感器等领域有潜在的应用价值.本文概述了近年来在制备方法、反应机理和组成、晶型和形貌及掺杂和应用方面的进展,并讨论了今后可能的研究发展方向.     

偶氮苯衍生物自组装单分子膜中的分子取响

利用反射红外光谱研究了金表面一系列具有不同碳链长度的偶氮苯巯基衍生物的自组装单分子膜.通过对比各向同性样品的透射谱和单分子膜的反射谱中各个吸收峰强度,定量地研究了分子中各部分的取向与分子结构的关系.我们分别提出了烷基链和偶氮基团取向计算的方法,利用该方法成功地求得了分子中各部分在膜的倾角.结果显示,当分子中烷基链长度增大时,碳链和偶氮苯基团相对于法线的倾斜逐渐加剧.这种倾角的变化归因于分子中碳链间范德华引力增大时,引起分子逐渐倾斜以达到最佳的范德华接触.同时研究发现,烷基链和偶氮基团受碳长度变化的影响并不相同.当分子中亚甲基数目增多时,烷基链的倾角迅速增大而偶氮苯倾角的增大则相对缓慢,这反映了它们在空间需求和本身刚性上的不同。     

First-principle DFT and MP2 modeling of infrared reflection-absorption spectra of oriented helical ethylene glycol oligomers

First-principle modeling is used to obtain a comprehensive understanding of infrared reflection absorption (RA) spectra of helical oligo(ethylene glycol) (OEG) containing self-assembled monolayers (SAMs). Highly ordered SAMs of methyl-terminated 1-thiaoligo(ethylene glycols) [HS(CH2CH2O)(n)CH3, n = 5, 6] on gold recently became accessible for systematic infrared analyses [Vanderah et al., Langmuir, 2003, 19, 3752]. We utilized the quoted experimental data to validate the first-principle modeling of infrared RA spectra of HS(CH2CH2O)(5,6)CH3 obtained by (i) DFT methods with gradient corrections (using different basis sets, including 6-311++G) and (ii) HF method followed by a M?ller-Plesset (MP2) correlation energy correction. In focus are fundamental modes in the fingerprint and CH-stretching regions. The frequencies and relative intensities in the calculated spectra for a single molecule are unambiguously identified with the bands observed in the experimental RA spectra of the corresponding SAMs. In addition to confirming our earlier assignment of the dominating peak in the CH-stretching region to CH2 asymmetric stretching vibrations, all other spectral features observed in that region have received an interpretation consistent (but not in all cases coinciding) with previous investigations. The obtained results provide an improved understanding of the orientation and conformation of the molecular building blocks within OEG-containing assemblies, which, in our opinion, is crucial for being able to predict the folding and phase characteristics and interaction of OEG-SAMs with water and proteins.     

Vibrationally selective optimal control of alignment and orientation using infrared laser pulses: application to carbon monoxide

Optimal control methods are used to study molecular alignment and orientation using infrared laser pulses. High order molecule-field interactions are taken into account through the use of the electric-nuclear Born-Oppenheimer approximation [G. G. Balint-Kurti et al., J. Chem. Phys. 122, 084110 (2005)]. High degrees of alignment and orientation are achieved by optimized infrared laser pulses of duration on the order of one rotational period of the molecule. It is shown that, through the incorporation of a vibrational projection operator into the optimization procedure, it is possible not only to maximize the alignment and orientation but also to bring the whole system into a single prescribed vibrational manifold. Numerical calculations are performed for carbon monoxide using ab initio potential energies computed in the presence of external electric fields.     

香豆素红外测试中样品前处理方法比较

在红外测试中,固体样品通常采用红外压片等方法进行前处理.通过对香豆素分别采用红外压片法、薄膜法和石蜡油糊法进行测试,发现薄膜法比压片法制样更加简便快捷、用量少、可回收,而且薄膜法制样还能避免压片过程中出现的碎片和粘片现象,测试时能够得到高质量的红外谱图.     

Structural and orientational studies of chiral N-[4(1-pyrene)butyroyl]-phenylalanine in cast film

Cast films of chiral material N-[4(1-pyrene)butyroyl]-l-phenylalanine (Py-l-Phe) and the racemic modification (the 1:1 mixture of Py-l-Phe and Py-d-Phe) have been investigated in the present study. The microscopic structure, molecular orientation and the aggregation in the film have been studied by using ultraviolet-visible (UV-vis) and infrared (IR) spectroscopy. When a cast film is formed from the chloroform solution at room temperature, the J-aggregates of Py-l-Phe and Py-d-Phe are observed by UV-vis spectra. A comparison of Fourier transform infrared (FT-IR) transmission and reflection-absorption (RA) spectroscopy has been applied to reveal the orientation and structural characterization of the cast films. It has been found that the pyrenyl ring in the cast film of Py-l-Phe assumes a nearly vertical orientation with respect to the surface of the solid substrate. And there are two different hydrogen bonding species, cyclic dimer and linear dimer, exist in carboxyl groups in cast films. The detailed analysis of the OH and NH stretching modes of Py-l-Phe and Py-d-Phe allows us to reveal the hydrogen bonds existing in the films.     

On the Hartree-Fock approximation to the electronic structure of molecule in the intense radiation field and the strong vibronic coupling

The Hartree-Fock approximation has been generalized to incorporate the nonadiabatic effect of molecular vibration previously by Tachibana et al. Here, we will derive the Hartree-Fock equation which reflects also the nonlinear effect of the infrared radiation field as well by using the Bloch-Nordsieck transformation which was discussed first by Nguyen-Dang and Bandrauk in the field of molecular physics. The Hartree-Fock equation reflects the non-adiabatic coupling between an electron and a molecular vibration and between the electron and a infrared radiation fields. The infrared radiation field also affects the dynamics of nuclear motion.Dedicated to Professor J. Koutecký on the occasion of his 65th birthday     

Molecular recognition of 7-(2-octadecyloxycarbonylethyl)guanine to cytidine at the air/water interface and LB film studied by Fourier transform infrared spectroscopy

Monolayer behavior of a nucleolipid amphiphile, 7-(2-octadecyloxycarbonylethyl)guanine (ODCG), on aqueous cytidine solution was investigated by means of surface-molecular area (pi-A) isotherms. It indicates that molecular recognition by hydrogen bonding is present between ODCG monolayer and the cytidine in subphase. The Fourier transform infrared (FTIR) transmission spectroscopic result indicates that the cytidine molecules in the subphase can be transferred onto solid substrates by Langmuir-Blodgett (LB) technique as a result of the formation of Watson-Crick base-pairing at the air/water interface. Investigation by rotating polarized FTIR transmission also suggests that the headgroup recognition of this amphiphile to the dissolved cytidine influence the orientation of the tailchains.     

A semi-classical model of attosecond electron localization in dissociative ionization of hydrogen

In the development of attosecond molecular science, a series of experiments have recently been performed where ionic fragment asymmetries in the dissociative ionization of H(2) into H(+) + H and that of D(2) into D(+) + D were used to uncover electron localization processes that occur on the attosecond and few-femtosecond timescale. Electron localization was observed both in strong-field dissociative ionization using carrier envelope phase-stable few-cycle laser pulses [Kling et al., Science, 2006, 312, 246] and in a two-color extreme ultra-violet + infrared attosecond pump-probe experiment [Sansone et al., Nature, 2010, 465, 763]. Here we show that the observed electron localization can be well understood using a semi-classical model that describes the dynamics in terms of quasi-static states that take the interaction of the molecule with the laser field instantaneously into account. The electron localization is shown to be determined by the passage of the dissociating molecule through a regime where the laser-molecule interaction is neither diabatic nor adiabatic.     

Poly(acrylic acid)-poly(ethylene glycol) layers on positively charged surface coatings: molecular structure, protein resistance, and application to single protein deposition

A new copolymer (PAA-PEG2000) has been designed, consisting of a negatively charged poly(acrylic acid) (PAA) backbone to which poly(ethylene glycol) (PEG) side chains with a molecular weight of about 2 kDa were grafted in a molecular ratio of 3:10. It readily adsorbs to positively charged surfaces and may be considered to be the anionic counterpart of PEG-grafted poly(l-lysine) (PLL-PEG), which was first described by Kenausis et al. and is widely used to render negatively charged surfaces protein-resistant. The synthesis of PAA-PEG2000 can be carried out in aqueous solution at room temperature and does not require any sophisticated techniques such as handling in an inert gas atmosphere. Using ellipsometry and infrared reflection absorption spectroscopy (IRRAS), the film structure has been carefully analyzed for copolymer adsorption onto three different positively charged surfaces, namely, thin layers of poly(allylamine) (PAH), poly(ethyleneimine) (PEI) and (3-aminopropyl)triethoxysilane (APTES). Besides the film thickness, the conformation of the PEG chains and their orientation with respect to the surface normal appear to be important parameters for the protein resistance of the films. Although PAA-PEG2000 adsorbed to PAH and PEI renders the surfaces inert, only partial protein resistance has been observed if the copolymer is deposited on APTES. In a model application, we have generated heterogeneous surfaces composed of isolated small Au nanoparticles (AuNP's) embedded in a protein-resistant layer of PAA-PEG2000 and demonstrated that the AuNP's can serve as adsorption sites for single protein species. In the future, these nanopatterned surfaces may be used for the investigation of isolated proteins.     

A theoretical study of molecular conduction. II. A Hartree-Fock approach to transmission probability

In this paper, we discuss molecular conductivity based on Green's function methods. In our calculations, we adopted the self-energy formalism to accommodate semi-infinite electrodes connected to a molecule, and the self-energy was obtained from the surface Green's function of the electrodes. We adopted the formalism of the surface Green's function derived by Sanvito et al. [Phys. Rev. B 59, 11936 (1999)] and Krstic et al. [Phys. Rev. B 66, 205319 (2002)], and although their formalisms for the surface Green's function were different, we were able to demonstrate that these formalisms are mathematically identical. We analyzed the electron transmission probability by using the spectrum expression of Green's function, instead of using the inverse matrix of the effective Hamiltonian that includes an isolated molecule and the electrodes. Finally, we calculated the transmission probability of benzenedithiol based on the Hartree-Fock method and analyzed the disappearance of the transmission probability due to the orbital interference.