Experimental investigation and optimization of loop heat pipe performance with nanofluids

Journal of Thermal Analysis and Calorimetry - High heat generation from electronic devices needs to cool down properly to prevent overheating. Loop heat pipe (LHP) is one of the excellent cooling...     

Computational study on the effects of variable viscosity of micropolar liquids on heat transfer in a channel

Journal of Thermal Analysis and Calorimetry - A numerical model is developed to study the effects of temperature-dependent viscosity on heat transfer in magnetohydrodynamic flow of micropolar fluid...     

Purification of low-abundance lysozyme in egg white via free-flow electrophoresis with gel-filtration chromatography

As an effective separation tool, free-flow electrophoresis has not been used for purification of low-abundance protein in complex sample matrix. Herein, lysozyme in complex egg white matrix was chosen as the model protein for demonstrating the purification of low-content peptide via an FFE coupled with gel fitration chromatography (GFC). The crude lysozyme in egg while was first separated via free-flow zone electrophoresis (FFZE). After that, the fractions with lysozyme activity were condensed via lyophilization. Thereafter, the condensed fractions were further purified via a GFC of Sephadex G50. In all of the experiments, a special poly(acrylamide- co-acrylic acid) (P(AM-co-AA)) gel electrophoresis and a mass spectrometry were used for identification of lysozyme. The conditions of FFZE were optimized as follows: 130 μL/min sample flow rate, 4.9 mL/min background buffer of 20 mM pH 5.5 Tris-Acetic acid, 350 V, and 14 °C as well as 2 mg/mL protein content of crude sample. It was found that the purified lysozyme had the purity of 80% and high activity as compared with its crude sample with only 1.4% content and undetectable activity. The recoveries in the first and second separative steps were 65% and 82%, respectively, and the total recovery was about 53.3%. The reasons of low recovery might be induced by diffusion of lysozyme out off P(AM-co-AA) gel and co-removing of high-abundance egg ovalbumin. All these results indicated FFE could be used as alternative tool for purification of target solute with low abundance.     

Medicinal Potential of Isoflavonoids: Polyphenols That May Cure Diabetes

In recent years, there is emerging evidence that isoflavonoids, either dietary or obtained from traditional medicinal plants, could play an important role as a supplementary drug in the management of type 2 diabetes mellitus (T2DM) due to their reported pronounced biological effects in relation to multiple metabolic factors associated with diabetes. Hence, in this regard, we have comprehensively reviewed the potential biological effects of isoflavonoids, particularly biochanin A, genistein, daidzein, glycitein, and formononetin on metabolic disorders and long-term complications induced by T2DM in order to understand whether they can be future candidates as a safe antidiabetic agent. Based on in-depth in vitro and in vivo studies evaluations, isoflavonoids have been found to activate gene expression through the stimulation of peroxisome proliferator-activated receptors (PPARs) (α, γ), modulate carbohydrate metabolism, regulate hyperglycemia, induce dyslipidemia, lessen insulin resistance, and modify adipocyte differentiation and tissue metabolism. Moreover, these natural compounds have also been found to attenuate oxidative stress through the oxidative signaling process and inflammatory mechanism. Hence, isoflavonoids have been envisioned to be able to prevent and slow down the progression of long-term diabetes complications including cardiovascular disease, nephropathy, neuropathy, and retinopathy. Further thoroughgoing investigations in human clinical studies are strongly recommended to obtain the optimum and specific dose and regimen required for supplementation with isoflavonoids and derivatives in diabetic patients.     

Synthesis and characterization of degradable hyperbranched poly(2‐ethyl‐2‐oxazoline)

Hyperbranched poly(2‐ethyl‐2‐oxazoline) was synthesized by a combination of cationic ring‐opening polymerization and the oxidation of thiol to disulfide groups. A three‐arm star poly(2‐ethyl‐2‐oxazoline) (PEtOx) was first synthesized using 1,3,5‐tris(bromomethyl) benzene as an initiator. The star PEtOx was end‐capped with potassium ethyl xanthate. Similarly, a linear PEtOx was synthesized and end‐capped with potassium ethyl xanthate using benzyl bromide as an initiator. Hyperbranched PEtOx was then obtained by in situ cleaving and subsequent oxidation of the star PEtOx and linear PEtOx mixture with n‐butylamine as both a cleaving agent and a base in tetrahydrofuran. The linear PEtOx was used to prevent the formation of gel. The hyperbranched PEtOx can be cleaved with dithiothreitol to trithiol and monothiol polymer. The hyperbranched PEtOx shows no remaining thiols using Ellman's assay. The resulting hyperbranched PEtOx was hydrolyzed to a novel hyperbranched polyethyleneimine with degradable disulfide linkages. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2030–2037     

Kinetic modeling of ZnO-rGO catalyzed degradation of methylene blue

Photodegradation of organic pollutants strongly depends on design of metal oxide semiconductor photocatalysts. Graphene, if composited with ZnO, can effectively enhance its photocatalytic performance for the eradication of pollutants from aqueous medium. Here in, ZnO-rGO is reported as highly active catalyst for degradation of methylene blue. A 200-mg/L solution of methylene blue dye was completely degraded within 1 h in comparison to 74% and 56% degradation over ZnO and rGO, respectively. The commonly used mechanisms of heterogeneous catalytic reactions, the Langmuir-Hinshelwood mechanism, and the Eley-Rideal mechanisms, were used to describe the reaction kinetics. The Langmuir-Hinshelwood mechanism was found as more favorable in this study. Apparent activation energy, E_ap, true activation energy, E_T, entropy, ΔS, and enthalpy, ΔH were calculated as 36.2 kJ/mol, 13.1 kJ/mol, 197.5 J/mol, and 23.1 kJ/mol, respectively.     

pH-Dependent Slipping and Exfoliation of Layered Covalent Organic Framework

Layered/two-dimensional covalent organic frameworks (2D COF) are crystalline porous materials composed of light elements linked by strong covalent bonds. Interlayer force is one of the main factors directing the formation of a stacked layer structure, which plays a vital role in the stability, crystallinity, and porosity of layered COFs. The as-developed new way to modulate the interlayer force of imine-linked 2D TAPB-PDA-COF (TAPB = 1,3,5-tris(4-aminophenyl)benzene, PDA = terephthaldehyde) by only adjusting the pH of the solution. At alkaline and neutral pH, the pore size of the COF decreases from 34 Å due to the turbostratic effect. Under highly acidic conditions (pH 1), TAPB-PDA-COF shows a faster and stronger turbostratic effect, thus causing the 2D structure to exfoliate. This yields bulk quantities of an exfoliated few/single-layer 2D COF, which was well dispersed and displayed a clear Tyndall effect (TE). Furthermore, nanopipette-based electrochemical testing also confirms the slipping of layers with increase towards acidic pH. A model of pH-dependent layer slipping of TAPB-PDA-COF was proposed. This controllable pH-dependent change in the layer structure may open a new door for potential applications in controlled gas adsorption/desorption and drug loading/releasing.     

Magnetohydrodynamic natural convection of hybrid nanofluid in a porous enclosure: numerical analysis of the entropy generation

Journal of Thermal Analysis and Calorimetry - The effect on the entropy production and MHD convection of the hybrid nanofluid Al2O3–Cu/water (water with Cu and Al2O3 nanoparticles) in a...     

Coupled Sliding Discharges: A Scalable Nonthermal Plasma System Utilizing Positive and Negative Streamers on Opposite Sides of a Dielectric Layer

A nonthermal plasma system based on simultaneously formed positive and negative streamers on either side of a dielectric layer is described. The coupled sliding discharge (CSD) reactor based on this concept was found to be scalable by stacking and operating multiple electrode assemblies in parallel, similarly to the shielded sliding discharge (SSD) reactor reported earlier. A comparison of the two systems showed that although the energy density in the CSD reactor was lower, the efficiency for NO conversion and ozone synthesis from dry air were significantly higher. The energy cost for 50 % NO removal was ~30 eV/molecule compared to ~60 eV/molecule in the case of the SSD under the same conditions of 330 ppm initial NO concentration in air. The energy cost decreased to ~12 eV/molecule in both cases when NO was mixed with plasma-activated air at the outlet of the reactor to utilize ozone for NO conversion i.e., indirect plasma treatment. The energy yield for ozone generation from dry air was at ~70 g/kWh, comparable in both systems. The results show that the concept of a CSD, as that of SSDs, allows the construction of compact, efficient plasma reactors.     

Gold-surface binding of molecular switches studied by M?ssbauer spectroscopy

The nonanuclear coordination compound [Mo^IV{(CN)Fe^III(3-methyl-saldptn)}₈]Cl₄ exhibits multiple spin transitions (3-methyl-saldptn = N,N′-bis(3′′-methyl-2′′-hydroxy-benzyliden)-1,7-diamino-4-azaheptane). This spin crossover cluster is bound via a self-assembled monolayer onto a two dimensional array gold surface. M?ssbauer spectroscopy indicates that the thermally and optically induced spin crossover of the compound is maintained. Thereby, the foundation for its potential practical application (e.g. in the field of information storage) was laid.