Glucose-based surfactants with hydrogenated, fluorinated, or hemifluorinated tails: synthesis and comparative physical-chemical characterization

(Hemi)fluorinated hydrophobic chains have been found to minimize the denaturating propensity of surfactants toward membrane proteins. The work reported herein deals with the synthesis of a new series of non-ionic glucose-based surfactants endowed with a hybrid hemifluorocarbon chain. The convergent synthesis is based on a one-pot reduction/alkylation of hemifluorinated thioacetate and glucosylated trishydroxymethyl acrylamidomethane using NaBH4 in methanol. This "mild" alkylation was studied in order to improve yields and to pass up the use of an excess of commercially unavailable hemifluorinated thiols. The physical-chemical properties in aqueous solution of this novel series were studied by surface tension measurement and dynamic light scattering (DLS), as well as their behavior upon reverse-phase chromatography, and were compared with those of their hydrogenated and perfluorinated analogues. The atypical effect of the additional ethyl tip to the fluorinated chain was demonstrated by higher critical micellar concentration values and abnormal hydrophobicities measured by reverse-phase chromatography. Moreover, according to Israelachvili's concept, DLS studies showed that surfactants bearing bulkier polar head self-assemble into small and well-defined aggregates, suggesting the formation of spherical micelles rather than the cylindrical ones usually observed with classical fluorinated surfactants.     

Electrode Materials for Desalination of Water via Capacitive Deionization

Recent years have seen the emergence of capacitive deionization (CDI) as a promising desalination technique for converting sea and wastewater into potable water, due to its energy efficiency and eco-friendly nature. However, its low salt removal capacity and parasitic reactions have limited its effectiveness. As a result, the development of porous carbon nanomaterials as electrode materials have been explored, while taking into account of material characteristics such as morphology, wettability, high conductivity, chemical robustness, cyclic stability, specific surface area, and ease of production. To tackle the parasitic reaction issue, membrane capacitive deionization (mCDI) was proposed which utilizes ion-exchange membranes coupled to the electrode. Fabrication techniques along with the experimental parameters used to evaluate the desalination performance of different materials are discussed in this review to provide an overview of improvements made for CDI and mCDI desalination purposes     

MIDA- and TIDA-Boronates Stabilize α-Radicals Through B−N Hyperconjugation

Multifunctional organoboron compounds increasingly enable the simple generation of complex, Csp³-rich small molecules. The ability of boron-containing functional groups to modify the reactivity of α-radicals has also enabled a myriad of chemical reactions. Boronic esters with vacant p-orbitals have a significant stabilizing effect on α-radicals due to delocalization of spin density into the empty orbital. The effect of coordinatively saturated derivatives, such as N-methyliminodiacetic acid (MIDA) boronates and counterparts, remains less clear. Herein, we demonstrate that coordinatively saturated MIDA and TIDA boronates stabilize secondary alkyl α-radicals via σ_B-N hyperconjugation in a manner that allows site-selective C−H bromination. DFT calculated radical stabilization energies and spin density maps as well as LED NMR kinetic analysis of photochemical bromination rates of different boronic esters further these findings. This work clarifies that the α-radical stabilizing effect of boronic esters does not only proceed via delocalization of radical character into vacant boron p-orbitals, but that hyperconjugation of tetrahedral boron-containing functional groups and their ligand electron delocalizing ability also play a critical role. These findings establish boron ligands as a useful dial for tuning reactivity at the α-carbon.     

Isobaric metabolite interferences and the requirement for close examination of raw data in addition to stringent chromatographic separations in liquid chromatography/tandem mass spectrometric analysis of drugs in biological matrix

In addition to matrix effects, common interferences observed in liquid chromatography/tandem mass spectrometry (LC/MS/MS) analyses can be caused by the response of drug-related metabolites to the multiple reaction monitoring (MRM) channel of a given drug, as a result of in-source reactions or decomposition of either phase I or II metabolites. However, it has been largely ignored that, for some drugs, metabolism can lead to the formation of isobaric or isomeric metabolites that exhibit the same MRM transitions as parent drugs. The present study describes two examples demonstrating that interference caused by isobaric or isomeric metabolites is a practical issue in analyzing biological samples by LC/MS/MS. In the first case, two sequential metabolic reactions, demethylation followed by oxidation of a primary alcohol moiety to a carboxylic acid, produced an isobaric metabolite that exhibits a MRM transition identical to the parent drug. Because the drug compound was rapidly metabolized in rats and completely disappeared in plasma samples, the isobaric metabolite appeared as a single peak in the total ion current (TIC) trace and could easily be quantified as the drug since it was eluted at a retention time very close to that of the drug in a 12-min LC run. In the second example, metabolism via the ring-opening of a substituted isoxazole moiety led to the formation of an isomeric product that showed an almost identical collision-induced dissociation (CID) MS spectrum as the original drug. Because two components were co-eluted, the isomeric product could be mistakenly quantified and reported by data processing software as the parent drug if the TIC trace was not carefully inspected. Nowadays, all LC/MS data are processed by computer software in a highly automated fashion, and some analysts may spend much less time to visually examine raw TIC traces than they used to do. Two examples described in this article remind us that quality data require both adequate chromatographic separations and close examination of raw data in LC/MS/MS analyses of drugs in biological matrix.     

An eco-friendly multi-analyte high-performance thin layer chromatographic densitometric determination of amoxicillin,metronidazole, and famotidine in their ternary mixtures and simulated gastric juice: A promising protocol for eradicating Helicobacter pylori

Gastrointestinal tract disorders constitute a heavy burden to healthcare providers. To eradicate Helicobacter pylori infection, different triple therapy protocols have been proposed. Among which are combinations of proton pump inhibitors (e.g., omeprazole), histamine-2 receptor antagonists (e.g., famotidine), along with antibiotics (e.g., amoxicillin). In this work, a sensitive and accurate high-performance thin-layer chromatographic method was developed for the simultaneous determination of amoxicillin, metronidazole, and famotidine in bulk powder and laboratory-prepared combined-tablet mixtures. Complete separation of the cited compounds was achieved using pre-coated silica gel plates with a mixture of methanol:chloroform:toluene:water:glacial acetic acid (5:2:1.5:0.5:0.1 v/v/v/v/v) as the mobile phase. The method was fully validated as per the international conference of harmonization guidelines. Good linearity, a correlation coefficient of 0.9991, was obtained in the concentration ranges 0.1–1.6 μg/band (amoxicillin), 0.1–0.9 μg/band (metronidazole), and 0.1–0.9 μg/band (famotidine). Since the method allowed the determination of the three compounds in combined tablets with a high degree of selectivity, accuracy, precision, with cost-effectiveness, it could be used for regular quality control. Moreover, the applicability of the proposed method was extended to the determination of the ternary mixture in simulated gastric juice. Method greenness was assessed using different green metrics.     

Convergence and superconvergence analyses of HDG methods for time fractional diffusion problems

We study the hybridizable discontinuous Galerkin (HDG) method for the spatial discretization of time fractional diffusion models with Caputo derivative of order 0 < α < 1. For each time t ∈ [0, T], when the HDG approximations are taken to be piecewise polynomials of degree k ≥ 0 on the spatial domain Ω, the approximations to the exact solution u in the L _∞(0, T; L ₂(Ω))-norm and to ?u in the \(L_{\infty }(0, \textit {T}; \mathbf {L}_{2}({\Omega }))\)-norm are proven to converge with the rate h ^k+1 provided that u is sufficiently regular, where h is the maximum diameter of the elements of the mesh. Moreover, for k ≥ 1, we obtain a superconvergence result which allows us to compute, in an elementwise manner, a new approximation for u converging with a rate h ^k+2 (ignoring the logarithmic factor), for quasi-uniform spatial meshes. Numerical experiments validating the theoretical results are displayed.     

A dynamic study of earthworm feeding ecology -using stable isotopes

Changes in the specific diet of earthworms with time in relation to landuse changes and two different climates were studied by analysing (13)C and (15)N natural abundance in soils and animals. Soil samples from three depths (0-10, 10-20 and 20-30 cm) and earthworms were collected from two sites: Santiago (Northwest Spain) and North Wyke (Southwest England) both consisting of replicated long-term grasslands and recently converted to maize plots. Earthworms were hand-sorted in the field at the peak of the maize growth and after harvesting at both sites. In the Spanish plots, nine and eight earthworm species, all belonging to the three ecological categories (epigeic, anecic and endogeic), were found under maize and permanent pasture, whereas at the English site five and seven different species were, respectively, identified. At both sites (13)C isotopic values of the earthworm tissues reflected changes in diet from C(3) to C(4) with epigeic and epi/anecic worms in the maize plots showing one delta unit difference in relation to the ones found in the grassland plots. Anecic worms seemed to be less responsive to landuse changes. The higher (13)C values of the Spanish soils were also reflected in the earthworm tissues when compared with the English samples. (15)N values showed no clear relationship with the cropping treatments but were clearly related to the ecological grouping, with endogeic worms reaching the highest values whereas for the epigeic and epi/anecic species the lowest values were obtained. This finding was also previously recorded by other authors1 and suggests that, in the future, stable isotope techniques could also be a useful tool in taxonomic studies. Copyright 1999 John Wiley & Sons, Ltd.     

Secondary ion yields produced by keV atomic and polyatomic ion impacts on a self-assembled monolayer surface

A suite of keV polyatomic or 'cluster' projectiles was used to bombard unoxidized and oxidized self-assembled monolayer surfaces. Negative secondary ion yields, collected at the limit of single ion impacts, were measured and compared for both molecular and fragment ions. In contrast to targets that are orders of magnitude thicker than the penetration range of the primary ions, secondary ion yields from polyatomic projectile impacts on self-assembled monolayers show little to no enhancement when compared with monatomic projectiles at the same velocity. This unusual trend is most likely due to the structural arrangement and bonding characteristics of the monolayer molecules with the Au(111). Copyright 1999 John Wiley & Sons, Ltd.     

Multiple ionization of argon in coincidence with projectile ions in 60–120 MeV Si q+-Ar collisions

A projectile ion-recoil ion coincidence technique has been employed to study the multiple ionization and the charge transfer processes in collisions of 60–120 MeV Si ^q+ (q = 4−14) ions with neutral argon atoms. The relative contribution of different ionization channels, namely; direct ionization, electron capture and electron loss leading to the production of slow moving multiply charged argon recoil ions have been investigated. The data reported on the present collision system result from a direct measurement in the considered impact energy for the first time. The total ionization cross-sections for the recoil ions are shown to scale as q ^1.7/E _p ^0.5 , where E _p is the energy in MeV of the projectile and q its charge state. The recoil fractions for the cases of total- and direct ionizations are found to decrease with increasing recoil charge state j. The total ionization fractions of the recoils are seen to depend on q and to show the presence of a ‘shell-effect’ of the target. Further, the fractions are found to vary as 1/j ² upto j = 8+. The average recoil charge state 〈j〉 increases slowly with q and with the number of lost or captured electrons from or into the projectile respectively. The projectile charge changing cross-sections σ _qq′ are found to decrease with increasing q for loss ionization and to increase with q for direct-and capture ionization processes respectively. The physics behind various scaling rules that are found to follow our data for different ionization processes is reviewed and discussed.