Thermally Crosslinkable and Chemically Modifiable Aromatic Polyesters Possessing Pendant Propargyloxy Groups

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer‐catalyzed interfacial polycondensation of 5‐(propargyloxy)isophthaloyl chloride (P‐IPC) and various compositions of P‐IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77–1.33 dL/g and 43,600–118,000 g/mol, respectively, indicating the achievement of reasonably high‐molecular weights. The 10% weight loss temperatures of (co)polyesters were in the range 390–420 °C, demonstrating their good thermal stability. (Co)polyesters exhibited T_g in the range 146–170 °C and T_g values decreased with increase in mol % incorporation of P‐IPC. The study of non‐isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post‐modification of the selected copolyester with 1‐(4‐azidobutyl)pyrene, 9‐(azidomethyl)anthracene, and azido‐terminated poly(ethyleneglycol) monomethyl ether via copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction. FTIR and ¹H NMR spectra confirmed that click reaction was quantitative. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 588–597     

Electrode Materials for Desalination of Water via Capacitive Deionization

Recent years have seen the emergence of capacitive deionization (CDI) as a promising desalination technique for converting sea and wastewater into potable water, due to its energy efficiency and eco-friendly nature. However, its low salt removal capacity and parasitic reactions have limited its effectiveness. As a result, the development of porous carbon nanomaterials as electrode materials have been explored, while taking into account of material characteristics such as morphology, wettability, high conductivity, chemical robustness, cyclic stability, specific surface area, and ease of production. To tackle the parasitic reaction issue, membrane capacitive deionization (mCDI) was proposed which utilizes ion-exchange membranes coupled to the electrode. Fabrication techniques along with the experimental parameters used to evaluate the desalination performance of different materials are discussed in this review to provide an overview of improvements made for CDI and mCDI desalination purposes     

MIDA- and TIDA-Boronates Stabilize α-Radicals Through B−N Hyperconjugation

Multifunctional organoboron compounds increasingly enable the simple generation of complex, Csp³-rich small molecules. The ability of boron-containing functional groups to modify the reactivity of α-radicals has also enabled a myriad of chemical reactions. Boronic esters with vacant p-orbitals have a significant stabilizing effect on α-radicals due to delocalization of spin density into the empty orbital. The effect of coordinatively saturated derivatives, such as N-methyliminodiacetic acid (MIDA) boronates and counterparts, remains less clear. Herein, we demonstrate that coordinatively saturated MIDA and TIDA boronates stabilize secondary alkyl α-radicals via σ_B-N hyperconjugation in a manner that allows site-selective C−H bromination. DFT calculated radical stabilization energies and spin density maps as well as LED NMR kinetic analysis of photochemical bromination rates of different boronic esters further these findings. This work clarifies that the α-radical stabilizing effect of boronic esters does not only proceed via delocalization of radical character into vacant boron p-orbitals, but that hyperconjugation of tetrahedral boron-containing functional groups and their ligand electron delocalizing ability also play a critical role. These findings establish boron ligands as a useful dial for tuning reactivity at the α-carbon.     

An eco-friendly multi-analyte high-performance thin layer chromatographic densitometric determination of amoxicillin,metronidazole, and famotidine in their ternary mixtures and simulated gastric juice: A promising protocol for eradicating Helicobacter pylori

Gastrointestinal tract disorders constitute a heavy burden to healthcare providers. To eradicate Helicobacter pylori infection, different triple therapy protocols have been proposed. Among which are combinations of proton pump inhibitors (e.g., omeprazole), histamine-2 receptor antagonists (e.g., famotidine), along with antibiotics (e.g., amoxicillin). In this work, a sensitive and accurate high-performance thin-layer chromatographic method was developed for the simultaneous determination of amoxicillin, metronidazole, and famotidine in bulk powder and laboratory-prepared combined-tablet mixtures. Complete separation of the cited compounds was achieved using pre-coated silica gel plates with a mixture of methanol:chloroform:toluene:water:glacial acetic acid (5:2:1.5:0.5:0.1 v/v/v/v/v) as the mobile phase. The method was fully validated as per the international conference of harmonization guidelines. Good linearity, a correlation coefficient of 0.9991, was obtained in the concentration ranges 0.1–1.6 μg/band (amoxicillin), 0.1–0.9 μg/band (metronidazole), and 0.1–0.9 μg/band (famotidine). Since the method allowed the determination of the three compounds in combined tablets with a high degree of selectivity, accuracy, precision, with cost-effectiveness, it could be used for regular quality control. Moreover, the applicability of the proposed method was extended to the determination of the ternary mixture in simulated gastric juice. Method greenness was assessed using different green metrics.     

Product and Mechanism of Gas‐phase Pyrolysis of 2‐arylidinehydrazinopyrimidines: Interesting Route to Condensed Heterocycles[1]

Gas‐phase pyrolysis of N‐arylidine‐N′‐pyrimidin‐2‐yl‐hydrazine derivatives 1a , 1b , 1c , 1d , 1e gave the corresponding arylnitriles 2a , 2b , 2c , 2d , 2e , 2‐aminopyrimidine 3 , 3‐phenyl‐1,2,4‐triazolo[4,3‐a]pyrimidines 4 , 2‐phenyl‐1,2,4‐triazolo[1,5‐a]pyrimidines 5 , 2,4,5‐triphenyl‐1H‐imidazole 6 , and 2,3‐diphenylquinoline 7 . The analyses of the reaction products are reported and used to elucidate the mechanism of the pyrolytic process.     

A Double-Strand Elastic Rod Theory

Motivated by applications in the modeling of deformations of the DNA double helix, we construct a continuum mechanics model of two elastically interacting elastic strands. The two strands are described in terms of averaged, or macroscopic, variables plus an additional small, internal or microscopic, perturbation. We call this composite structure a birod. The balance laws for the macroscopic configuration variables of the birod can be cast in the form of a classic Cosserat rod model with coupling to the internal balance laws through the constitutive relations. The internal balance laws for the microstructure variables also take a mathematical form analogous to that for a Cosserat rod, but with coupling to the macroscopic system through terms corresponding to distributed force and couple loads.     

Aerodynamic forces on a tall building in a turbulent boundary layer

The model studies were designed to obtain information concerning wind loads on a tall building by placing the model in a turbulent shear flow simulating expected atmospheric boundary-layer winds. Since current design codes are inadequate for predicting all possible motions of tall buildings, it is important that better knowledge of mean and fluctuating loadings and their distributions becomes available. Experiments were conducted to determine the mean and fluctuating forces and twisting moments at several levels over the surface of a model. By determining the effects at several levels simultaneously, it was possible to correlate forces and moments at five levels with one common level. A single model was tested at varying orientations. Tests were also conducted with an identical model placed upstream so that its wake influenced the flow around the instrumented model. Results are presented in terms of distributions of force and moment coefficients and correlations at different levels. The spectral character of the force and moment components is illustrated for one case. Paper was presented at 1977 SESA Spring Meeting held in Dallas, TX on May 15–20.     

Graphene to graphite; a layer by layer experimental measurements and density function theory calculations of electric conductivity

ABSTRACT

We measured the electric conductivity of large (25?×?50?mm) graphene films as a function of number of layers in the range of 1–20 layers. We also calculated the energy gap for such samples using density function theory. Our results showed a conductivity slightly above that of ITO for monolayer graphene and an exponential decrease as the number of graphene layers increased. Both experimental and simulation results showed a convergence of graphene into graphite at as little as 18–20 layers.