载气流速对高场不对称波形离子迁移谱的影响

载气流速是影响高场不对称波形离子迁移谱(FAIMS)的重要参数.以自制的高场不对称波形离子迁移谱仪为实验平台,在射频电场幅值3 kV/cm,频率500 kHz,占空比0.36的条件下,研究了载气流速对苯离子迁移谱谱峰强度和半峰宽的影响.实验结果表明: 载气流速为3.7 L/min时,苯样品的谱峰强度最大,仪器的灵敏度最高.随着载气流速的增加,谱峰半峰宽变宽,仪器的分辨率下降.载气流速为3 .0～3.7 L/min时仪器综合性能最佳.此结果对于控制迁移谱仪载气流速有重要的参考意义.     

Characterization, synthesis and self-aggregation of (-)-alternarlactam: a new fungal cytotoxin with cyclopentenone and isoquinolinone scaffolds

(-)-Alternarlactam [(-)-1], a new promising cytotoxin against two human cancer cell lines, was isolated from an endophyte culture and synthesized (along with (+)-1) from readily available starting materials. The absolute configuration, chirality-activity relevance and self-aggregation of (-)-1 were assigned by a combination of synthetic, spectroscopic and computational approaches. The full characterization of the new fungal cytotoxin may provide valuable information in the discovery of new antitumor agents.     

联苯并咪唑化合物的合成、表征与抗癌活性

以联苯四胺、芳香醛为原料,DMF为溶剂,KI为催化剂,在空气存在下回流反应,合成了6种新的联苯并咪唑化合物,产率较高(58.4%～98.0%),其结构用IR、1HNMR、13CNMR、MS、元素分析等测试技术进行了表征。适宜的合成条件是:反应温度150℃,反应时间12h。初步测试表明,目标化合物对培养人肝癌Bel-7402细胞生长有一定抑制活性。     

Towards the object-oriented design of active hydrogen evolution catalysts on single-atom alloys

Given a desired property, locating relevant materials is always highly desired but very challenging in a range of areas, including heterogeneous catalysis. Obviously, object-oriented design/screening is an ideal solution to this problem. Herein, we develop an inverse catalyst design workflow in Python (CATIDPy) that utilizes a genetic-algorithm-based global optimization method to guide on-the-fly density functional theory calculations, successfully realizing the highly accelerated location of active single-atom alloy (SAA) catalysts for the hydrogen evolution reaction (HER). 70 binary and 752 ternary SAA candidate catalysts are identified for the HER. Furthermore, via considering the segregation stability and cost of materials, we extracted 6 binary and 142 ternary SAA candidate catalysts that are recommended for experimental synthesis. Remarkably, guided by these theoretical identifications, homogeneously dispersed Ni-based bimetallic catalysts (e.g., NiMo, NiAl, Ni₃Al, NiGa, and NiIn) were synthesized experimentally to test the reliability of the CATIDPy workflow, and they showed superior HER performance to bare Ni foam, indicating huge potential for use in real-world water electrolysis techniques. Perhaps more importantly, these results demonstrate the capacity of such a proposed approach for investigating unexplored chemical spaces to efficiently design promising catalysts without knowledge from the expert domain, which has far-reaching implications.

An inverse catalyst design workflow in Python (CATIDPy) for discovering unexplored chemical spaces successfully realized the highly accelerated location of active single-atom alloy (SAA) catalysts for the hydrogen evolution reaction (HER).     

Simultaneous Separation and Determination of Benzoic Acid Compounds in the Plant Medicine by High Performance Capillary Electrophoresis

A simple and inexpensive high performance capillary electrophoresis (HPCE) was applied to separate five benzoic acid compounds simultaneously. The investigation was carried out by micellar electrokinetic capillary chromatography (MECC). To avoid a time‐consuming and tedious procedure, orthogonal experimental design OA₉ (3⁴) for separation experiments was applied to find the optimal conditions in terms of the resolution and analytical time. The best conditions for separation were obtained using a 20 mM borax and 30 mM sodium dodecyl sulfate (SDS) buffer (pH 9.8) containing 2 mM β‐CD and 4% methanol (v/v). Online UV detection was performed at 250 nm. A voltage of 16 kV was applied and the temperature was controlled at 25 °C. Injection was performed for 5 s. The method was validated for the quantification of benzoic acid, salicylic acid and ortho‐aminobenzoic acid in Radix Isatidis, a traditional plant medicine with removal of endotoxin. The separation and determination were satisfactory and quick.     

Comparison of RP, Ion-Pair and IE Chromatography Coupled with UV and Tandem Mass Spectrometry for the Determination of 8-Hydroxyquinoline in Cosmetics

Liquid chromatographic methods based on reversed-phase, ion-pair and ion-exchange chromatography coupled with ultraviolet spectrometry and tandem mass spectrometry have been developed and compared for the determination of 8-hydroxyquinoline in cosmetic samples. The individual parameters of different techniques are systematically optimized. The reversed-phase chromatography using ultrasonic extraction, centrifugation and filtration prior to LC–UV and LC–MS–MS detection was selected to be the general analytical method for the routine analysis of 8-hydroxyquinoline in cosmetics due to its simplicity, column reproducibility and sensitivity. The procedure is rapid, simple and suitable for the quality control of cosmetic preparations. The application of this technique to the assay of commercial products is also presented.     

对烷氧基取代 MeO-BIPHEP 型手性双膦钌配合物催化 β-酮酸酯不对称加氢反应

 报道了对烷氧基取代的 MeO-BIPHEP 型手性双膦配体钌配合物催化的β-酮酸酯不对称加氢反应, 考察了反应温度、压力、底物/催化剂摩尔比和溶剂对反应的影响. 结果表明, 在乙醇中该配合物催化 3-丁酮酸乙酯加氢反应的对映选择性达 98.0%,且对含不同取代基的β-酮酸酯均表现出较高的活性和对映选择性.     

水相中RuCl2(TPPTS)2-(S,S)-DPENDS催化苄叉丙酮的不对称加氢反应

 将水溶性手性二胺 (S,S)-1,2-二苯基乙二胺二磺酸钠 ((S,S)-DPENDS) 与钌膦配合物 ([RuCl2(TPPTS)2]2) 原位生成的催化剂用于催化水相中苄叉丙酮的不对称加氢反应. 在优化条件下, 羰基加氢产物 4-苯基-3-丁烯-2-醇的选择性可达 96.0%, 对映选择性可达 71.2%. 经正己烷简单萃取后即可实现催化剂与加氢产物的分离, 循环使用 5 次后, 目标产物 4-苯基-3-丁烯-2-醇选择性和对映选择性没有明显下降.     

TiO2-Al2O3载体的制备及Ni2P/TiO2-Al2O3催化剂上的同时加氢脱硫和加氢脱氮反应

 以溶胶-凝胶法制备的 TiO2-Al2O3 复合氧化物为载体, 采用浸渍法制备了 Ni2P/TiO2-Al2O3 催化剂, 并用 X 射线衍射、N2 吸附脱附、红外和 X 射线光电子能谱等技术对催化剂进行了表征, 考察了载体中 TiO2 含量、焙烧温度及其制备方法对 Ni2P/TiO2-Al2O3 催化剂上同时进行噻吩加氢脱硫和吡啶加氢脱氮反应的影响. 结果表明, 以 Ni/P 摩尔比为 1/2 的前驱体制备的催化剂表面仅出现 Ni2P 物相; 当载体中 TiO2 的含量为 80%, 焙烧温度为 550 oC 时, Ni2P/TiO2-Al2O3 催化剂上加氢脱硫和加氢脱氮的活性最高. 在 360 oC, 3.0 MPa, 氢/油体积比 500, 液时体积空速 2.0 h?1 的条件下, 噻吩和吡啶转化率分别为 61.3%和 64.4%.