Simul 5 - free dynamic simulator of electrophoresis

We introduce the mathematical model of electromigration of electrolytes in free solution together with free software Simul, version 5, designed for simulation of electrophoresis. The mathematical model is based on principles of mass conservation, acid-base equilibria, and electroneutrality. It accounts for any number of multivalent electrolytes or ampholytes and yields a complete picture about dynamics of electromigration and diffusion in the separation channel. Additionally, the model accounts for the influence of ionic strength on ionic mobilities and electrolyte activities. The typical use of Simul is: inspection of system peaks (zones), stacking and preconcentrating analytes, resonance phenomena, and optimization of separation conditions, in either CZE, ITP, or IEF.     

Journal of Natural Gas Chemistry begins to come off the press bimonthly in 2010

Natural gas occupies an increasingly important position in the structure of global energy resources.In order to adapt to the fast developments in natural gas chemistry and hydrogen energy, and to accelerate     

含氧化镧的甲烷氧化偶联催化剂的一些特性

利用ＤＴＡ、ＴＰＤ－ＭＳ、ＸＲＤ、ＴＰＲ及ＴＰＳＲ－ＭＳ等手段对Ｌａ＿２Ｏ＿３和含Ｌａ＿２Ｏ＿３的甲烷氧化偶联催化剂进行了研究。实验发现含Ｌａ＿２Ｏ＿３的催化剂的一个特点是其容易吸水，此时，催化剂中除含Ｌａ＿２Ｏ＿３外，还有Ｌａ（ＯＨ）＿３及Ｌａ＿２Ｏ＿３ＣＯ＿２存在。ＴＰＲ及ＴＰＳＲ结果表明了催化剂的起始氢气还原温度与纯甲烷的程序升温反应开始温度的一致性，这说明催化剂的晶格氧参与了甲烷的活化过程。不同的氧化物由于其晶格氧的活性不同，因而其活化甲烷的温度不同。Ｌａ＿２Ｏ＿３中的晶格氧非常活泼，它在７３０℃时即可以与甲烷或与Ｈ＿２反应而本身被还原。甲烷和氧气共进料时的程序升温反应（ＴＰＳＲ－ＭＳ）表明甲烷氧化偶联反应中Ｃ＿２烃的选择性有一最佳温度范围。     

铁助剂对Rh-Mn-Li/SiO2催化剂表面上的CO脱附和CO加氢行为的影响

 采用一氧化碳程序升温脱附（CO－TPD）和吸附的一氧化碳加氢程序升温表面反应（TPSR）考察了Fe助剂对Rh基催化剂上CO的脱附行为及吸附CO的加氢行为的影响．CO－TPD实验表明，在Rh／SiO2催化剂上CO有三个脱附峰．在Rh－Mn－Li／SiO2中加入0．05％Fe后，高温脱附CO比Rh／SiO2催化剂上相应的CO量大．增加Fe的负载量，CO的脱附量减少．TPSR实验中，CO加氢反应的主要产物是甲烷．不同组分的催化剂上甲烷的生成温度有如下顺序：Rh／SiO2（482K）＜Rh－Mn－Li／SiO2（489K）＜Rh－Fe／SiO2（494K）＜Rh－Mn－Li－Fe／SiO2（501K）．甲烷峰的产生伴随着CO（s）高温脱附峰的消失，说明甲烷是由强吸附的CO加氢生成的．     

乙烷与CO2制乙烯反应的热力学和动力学研究

乙烷与ＣＯ２的主要反应及其热力学研究表明，乙烷与ＣＯ２反应很复杂，提高ＣＯ２氧化乙烷脱氢生成乙烯的选择，关键在一催化剂的开发；ＣＯ２不但可提高乙灶脱氢制乙烯的热力学平衡转化率，而且可与催化剂表面的积碳发生反应，延长催化剂的使用寿命。研究了催化剂上乙烷与ＣＯ２制乙烯反应的动力学，确定了ＣＯ２氧化乙烷脱氢反应的动力学方程及参数，表明乙烷与ＣＯ２制乙烯的反应速度比乙烷热裂解制乙烯的反应速度要大得多。     

3,19—二羟基—1—硫杂—5,8,11,14,17—五氧杂环二十烷的醚化与缩聚反应

３，１９－二羟基－１－硫杂－５，８，１１，１４，１７－五氧杂环二十烷（简称二羟基硫杂２０－冠－６）在一缩二乙二醇二甲醚和氢化钠存在下可与卤代烷顺利地进行醚化瓜尖，得到双己氧基，双十二烷氧基，双十六烷氧基，双苄氧基和双烯丙氧基硫杂２０－冠－６，同时也得到了单己氧基，单十二烷氧基，单十六烷氧基和单苄氧基单羟基硫杂２０－冠－６副产物，二羟基硫杂冠醚可顺利地与丁二酰氯缩聚，得到主链含硫杂冠醚基团的聚酯。     

Increase the Degradation Efficiency of Organic Pollutants with a Radical Scavenger （Cl^-） in a Novel Photoelectrocatalytic Reactor

Photoelectrocatalytic degradation performance of quinoline in saline water was investigated using a new-designed continuous flow three-dimensional electrode-packed bed photocatalytic reactor.It is interesting to find that chloride ion has an obvious enhancement effect rather than a scavenging effect on the photoelectrocatalytic degradation of quinoline,and create a kinetic synergetic effect in the photoelectrocatalytic reactor.     

Influence of the microstructure of semiconductor sensor materials on oxygen chemisorption on their surface

The correlations between the microstructure and oxygen chemisorption on the surface of nanocrystalline SnO₂ and In₂O₃ were established. The activation energy of oxygen chemisorption was estimated, and the chemisorbed species dominating in the temperature range 200–400°C (working temperature range of semiconductor gas sensors) was identified. An increase in the crystallite size tends to decrease the effective activation energy of oxygen chemisorption and to increase the surface coverage with chemisorbed oxygen and the contribution from atomic species.     

An iron-57 Mössbauer spectroscopy and EXAFS study of the hydrogen pretreatment of titania-supported iron-ruthenium catalysts

The changes in composition and structure which are induced in a titania-supported iron-ruthernium catalyst following treatment in hydrogen have been investigated in situ by⁵⁷Fe Mössbauer spectroscopy and by EXAFS. The results show that ruthenium dioxide is readily reduced at temperatures below ca. 500°C to ca. 20 Å clusters of metallic ruthenium whilst α-Fe₂O₃ is partially reduced at 130°C to Fe²⁺ and Fe⁰. The Fe³⁺ which is formed by the reoxidation of Fe²⁺ under the reducing conditions at 500°C segregates to the interface of the bimetallic phase and the titania support. It is suggested that continued treatment at 700°C produces a high dispersion of iron which is coordinated to oxygen atoms of the support. The ca. 20 Å clusters of metallic ruthenium may be envisaged as being anchored to the support via iron-ruthenium bonds