以空气为氧化剂Pd(OAc)2/HPMo/AcOH催化苯液相氧化偶联合成联苯

 研究了以Pd(OAc)2为催化剂,H3PMo12O40为助催化剂,空气为氧化剂,在乙酸溶液中于373 K条件下,在500 ml高压釜中由苯液相氧化偶联合成联苯. 结果表明,反应产物中联苯的选择性高达92%以上,并且只有少量的三联苯副产物生成. 分别考察了H3PMo12O40的加入量和O2分压对以空气或纯O2为氧化剂时Pd/HPMo/AcOH催化苯液相氧化偶联合成联苯反应催化性能的影响. 根据反应液颜色的变化以及文献结果推测,在反应过程中通过钯和钼物种的氧化和还原作用使苯氧化生成联苯.     

溴化 N-烷基取代咪唑中离子热合成硅磷酸铝分子筛

 以溴化N-烷基取代咪唑离子液体为反应介质,采用离子热法合成了AEL型硅磷酸铝分子筛,并考察了不同离子液体和反应物中正硅酸四乙酯的添加量对分子筛结构的影响. 结果表明,以1-乙基-3-甲基溴化咪唑为反应介质,并引入正硅酸四乙酯时,产物为含有未知结构晶体的AEL型硅磷酸铝分子筛,而且随着正硅酸四乙酯添加量的增大,未知结构晶体增多. 以1-己基-3-甲基溴化咪唑为反应介质时,产物为高结晶度的上述未知结构晶体.     

加压条件下BaNi0.3Al11.7O19-δ催化剂上甲烷部分氧化制合成气

 考察了加压(0.2～1.0 MPa)条件下BaNi0.3Al11.7O19-δ催化剂对甲烷部分氧化(POM)制合成气反应的催化性能,并且与LiLaNiOx/γ-Al2O3的POM催化性能进行了比较. BaNi0.3Al11.7O19-δ催化剂具有良好的POM催化性能,在850 ℃和1.0 MPa下,可得到75%的甲烷转化率和85%的CO选择性. 在60 h的连续实验中,催化剂活性及选择性基本保持不变,显示出较高的催化稳定性. 用XRD,XPS和TG/DTA表征手段研究了反应前后催化剂的晶体结构、表面性质以及积碳行为,结果表明该催化剂具有较强的抗Ni流失和抗积碳能力. BaNi0.3Al11.7O19-δ 的六铝酸盐结构中Ni离子和相邻原子之间的相互作用使其具有较高的热稳定性及结构稳定性,从而显示出良好的POM催化活性和稳定性.     

Mo-V-Te-Nb-O催化剂上丙烷选择氧化制丙烯酸Ⅰ.催化剂的制备条件及稳定性

 研究了催化剂的制备条件(焙烧方式、焙烧气氛和焙烧温度)对Mo-V-Te-Nb-O上丙烷选择氧化制丙烯酸反应的影响. 结果表明,制备条件对催化剂的催化性能具有很大的影响. 与敞开式焙烧制得的催化剂相比,封闭式焙烧制得的催化剂具有较高的丙烯酸选择性,但丙烷转化率较低. 在空气中焙烧制得的催化剂对丙烯酸无选择性,但在氮气和氩气中焙烧制得的催化剂具有很高的丙烷转化率和丙烯酸选择性. 随着焙烧温度的升高,丙烷转化率降低,丙烯酸选择性升高,适宜的焙烧温度为600 ℃. 催化剂制备条件对催化剂的晶相结构也具有重要的影响. 在惰性气氛中采用600 ℃下封闭式焙烧制得的Mo-V-Te-Nb-O催化剂经210 h反应后,丙烷转化率保持为19%,而丙烯酸选择性持续升高,由32%升至50%.     

A new method for preparing （2Z, 4Z, 6Z）-diethyl-4,5- oxepinedicarboxylates and some 1H-azepine analogues

A new method for preparing (2Z, 4Z, 6Z)-4,5-diethyloxepinodicarboxylate by one-step is described. The synthesis of several oxepines and azepines derivatives was carried out by the reaction of substituted furans or pyrroles with diethyl acetylenedicarbox-ylate in boiling toluene. The effect factors for this reaction were discussed and reaction condition was optimized.     

Structure-directing role of amines in the ionothermal synthesis

The structure-directing effect of amine has been observed in the ionothermal synthesis of aluminophosphate molecular sieves in 1-butyl-3-methylimidazolium bromide ionic liquid. The seven different amines we tested have an influence on the crystallization dynamics and the final product, leading to the formation of pure AFI and ATV structures.     

Methane hydrate formation and dissociation in synthetic seawater

The formation and dissociation of methane gas hydrate at an interface between synthetic seawater (SSW) and methane gas have been experimentally investigated in the present work. The amount of gas consumed during hydrate formation has been calculated using the real gas equation. Induction time for the formation of hydrate is found to depend on the degree of subcooling. All the experiments were conducted in quiescent system with initial cell pressure of 11.14 MPa. Salinity effects on the onset pressure and temperature of hydrate formation are also observed. The dissociation enthalpies of methane hydrate in synthetic seawater were determined by Clausius-Clapeyron equation based on the measured phase equilibrium data. The dissociation data have been analyzed by existing models and compared with the reported data.     

离子热法合成分子筛的研究进展

离子热法是以离子液体或低共熔混合物为介质的一种新型的分子筛合成方法, 它提供了一种离子态的独特合成环境, 为合成新型分子筛及研究分子筛的生成机理提供了机会. 本文综述了离子热法在分子筛合成方面取得的一些进展, 包括合成方法的创新、合成机理的研究、新材料的合成以及新型催化剂的制备等, 并展望了其发展前景.     

新型水溶性配体-负载金属氢甲酰化催化剂:TPPTS-Rh/SiO2

考察了几种硅胶负载贵金属催化剂和HRhCO(TPP)3催化剂的1-己烯氢甲酰化反应,对Rh/SiO2、 HRhCO(TPPTS)3/SiO2 和TPPTS-Rh/SiO2上的1-己烯氢甲酰化结果进行了比较.结果表明, TPPTS-Rh/SiO2催化剂的醛的选择性和醛的正异比n/b接近HRhCO(TPPTS)3/SiO2 的相应的催化性能,而远高于Rh/SiO2的相应的催化性能, 7.0 MPa高压下TPPTS-Rh/SiO2催化剂的活性大幅度增加,达到0.0692 S-1.实验排除了其他可能,认为是含有孤对电子的TPPTS 和Rh/SiO2中高度分散的Rh粒子产生了化学键的作用,形成了具有匀相性能的支撑水膜多相催化剂: TPPTS-Rh/SiO2.     

Synthesis and characterization of gallium-based perovskitetype dense membrane with oxygen semipermeability

La0.15Sr0.85Ga0.3Fe0.7O3-δ(LSGFO) and La0.15Sr0.85Co0.3Fe0.7O3-δ(LSCFO) mixed oxygen-ion and electron conducting oxides were synthesized by using a combined EDTA and citrate complexing method, and the corresponding dense membranes were fabricated. The properties of the oxide powders and membranes were characterized with combined SEM, XRD, H2-TPR, O2-TPD techniques, mechanical strength and oxygen permeation measurement. The results showed that LSGFO had much higher thermochemical stability than LSCFO due to the higher valence stability of Ga3+. After the temperature-programmed reduction by 5% H2 in Ar from 20℃to 1020℃, the basic perovskite structure of LSGFO was successfully preserved. LSGFO also favors the oxygen vacancy formation better than LSCFO. Oxygen permeation measurement demonstrated that LSGFO had higher oxygen permeation flux than LSCFO, but they had similar activation energy for oxygen transportation, with a value of 110 and 117 kJ ?mol~(-1), respectively. The difference in oxygen permeation f