Highly efficient non-doped blue fluorescent OLEDs with low efficiency roll-off based on hybridized local and charge transfer excited state emitters

Designing a donor–acceptor (D–A) molecule with a hybridized local and charge transfer (HLCT) excited state is a very effective strategy for producing an organic light-emitting diode (OLED) with a high exciton utilization efficiency and external quantum efficiency. Herein, a novel twisting D–π–A fluorescent molecule (triphenylamine–anthracene–phenanthroimidazole; TPAAnPI) is designed and synthesized. The excited state properties of the TPAAnPI investigated through photophysical experiments and density functional theory (DFT) analysis reveal that its fluorescence is due to the HLCT excited state. The optimized non-doped blue OLED using TPAAnPI as a light-emitting layer exhibits a novel blue emission with an electroluminescence (EL) peak at 470 nm, corresponding to the Commission International de L''Eclairage (CIE) coordinates of (0.15, 0.22). A fabricated device termed Device II exhibits a maximum current efficiency of 18.09 cd A⁻¹, power efficiency of 12.35 lm W⁻¹, luminescence of ≈29 900 cd cm⁻², and external quantum efficiency (EQE) of 11.47%, corresponding to a high exciton utilization efficiency of 91%. Its EQE remains as high as 9.70% at a luminescence of 1000 cd m⁻² with a low efficiency roll-off of 15%. These results are among the best for HLCT blue-emitting materials involved in non-doped blue fluorescent OLEDs. The performance of Device II highlights a great industrial application potential for the TPAAnPI molecule.

A new pure fluorescent blue HLCT-emitter was designed and synthesized. Highly efficient non-doped blue OLEDs with low efficiency roll-off were achieved.     

不对称合成 ⅩⅥ.(十)-樟脑亚胺的立体控制反应和樟脑结构的研究——(十)-樟脑缩苄胺转动势能计算和构象分析

本文对N-(对-硝基)苄基-1,7,7-三甲基-双环[2.2.1]庚烷-2-亚胺(3)和N-[11—[12-羟基-12-二苯基]甲基]苄基-1,7,7-三甲基-双环[2.2.1]庚烷-2-亚胺(4)进行了X-射线晶体结构分析。采用MOPAC程序的MNDO方法对(+)-樟脑缩苄胺即N-苄基-1,7,7-三甲基-双环[2.2.1]庚烷-2-亚胺(2a)的内部转动势能进行了理论计算。结果表明,(+)-樟脑缩苄胺(2a)以反式(trans)构象形式存在,它在不对称反应中的立体选择性主要受樟脑环上方C10甲基的控制。     

Amperometric determination of ascorbic acid at a novel ‘self-doped’ polyaniline modified microelectrode

A ‘self-doped’ polyaniline modified microelectrode, prepared by cyclic potential sweep on a microdisk gold electrode from –0.2 to 0.85 V in 0.5 mol/L sulfuric acid containing aniline and o-aminobenzoic acid, has been developed. The copolymerized process and the resulting polymer characteristics were investigated in detail. This composite film indicated a good electrochemical activity in a wide pH range even in basic solution. Meanwhile, the redox couple exhibited an excellent electrocatalytic activity for the oxidation of ascorbic acid. The oxidation overpotential of ascorbic acid was decreased over 200 mV at this modified electrode compared with a bare gold one. Moreover, the effects of film thickness and pH on the catalytic efficiency were further studied. The dependence of catalytic currents on the concentration of ascorbic acid was linear in the range of 1.2 × 10^–5～ 2.4 × 10^–3 mol/L with a correlation coefficient of 0.996. Also, the determination of ascorbic acid in actual samples was evaluated and the results are satisfactory.     

α-Tetralone glycosides from the green walnut husks of Juglans mandshurica Maxim. and their cytotoxic activities

Abstract

Five new α-tetralone glycosides, juglanbiosides A-E (1–5), together with an α-tetralone derivative (15) and nine known 1,4-naphthoquinones (6–14) were isolated from the 95% EtOH extract of green walnut husks of Juglans mandshurica Maxim. Their structures were elucidated by comprehensive spectroscopic methods (¹H, ¹³C NMR, DEPT, HSQC, HMBC, CD, HR-ESI-MS). In vitro cytotoxicities of all the isolated compounds were evaluated against BGC-823, HCT-15 and K562 cancer cell lines.

     

Interaction between cucurbit[6]uril and bispyridinecarboxamide

The interaction between cucurbit[6]uril and N,N′-(m-bispyridinecarboxamide)-1,n-alkane (m = 2, 3, 4; n = 4, 6, 8) has been investigated by ¹H-NMR, ESI-MS and single crystal X-ray diffraction method. The results show that cucurbit[6]uril can form pseudorotaxanes with N,N′-(m-bispyridinecarboxamide)-1,6-hexane (m = 2, 3, 4) easily. When the alkyl chain length increases (n = 8), the binding mode is identical, but the binding ability of the host towards guest decreases. In both two cases cucurbit[6]uril shows no selectivity towards positional isomers. However, in the case of n = 4, the binding mode is different, having relations with positional substitution of the guest. Only N,N′-(m-bispyridinecarboxamide)-1,4-butane (m = 2) can form pseudorotaxane with cucurbit[6]uril, while the other two (m = 3, m = 4) form external complex with cucurbit[6]uril. The possible reason for the difference has been discussed.     

Dysfunction of Shh signaling activates autophagy to inhibit trophoblast motility in recurrent miscarriage

In early pregnancy, the placenta anchors the conceptus and supports embryonic development and survival. This study aimed to investigate the underlying functions of Shh signaling in recurrent miscarriage (RM), a serious disorder of pregnancy. In the present study, Shh and Gli2 were mainly observed in cytotrophoblasts (CTBs), Ptch was mainly observed in syncytiotrophoblasts (STBs), and Smo and Gli3 were expressed in both CTBs and STBs. Shh signaling was significantly impaired in human placenta tissue from recurrent miscarriage patients compared to that of gestational age-matched normal controls. VEGF-A and CD31 protein levels were also significantly decreased in recurrent miscarriage patients. Furthermore, inhibition of Shh signaling impaired the motility of JAR cells by regulating the expression of Gli2 and Gli3. Intriguingly, inhibition of Shh signaling also triggered autophagy and autolysosome accumulation. Additionally, knockdown of BECN1 reversed Gant61-induced motility inhibition. In conclusion, our results showed that dysfunction of Shh signaling activated autophagy to inhibit trophoblast motility, which suggests the Shh pathway and autophagy as potential targets for RM therapy.Subject terms: Embryology, Endocrine reproductive disorders, Autophagosomes     

Elucidation of stabilizing pickering emulsion with jackfruit filum pectin-soy protein nanoparticles obtained by photocatalysis

There is still the dearth of reports of jackfruit filum pectin-based nanoparticles as the Pickering emulsifiers with respect to the applications in foods, cosmetics and medicines. So we fabricated soy protein-jackfruit filum pectin nanoparticles (SPP) by photocatalysis as Pickering emulsifier. Jackfruit filum pectin exhibited lower yield (17.31%), degree of methoxylation (15.53%), but higher galacuronic acid content (74.22%). A strong linkage between pectin and soy protein was formed by photocatalysis. The conjugated polymer could self-assemble into compact near globular nanoparticle. The mean size of SPP was larger than that of soy protein nanoparticles but smaller than that of soy protein-pectin complex without photocatalysis. Besides, the zeta potential of SPP was ?33.8?mV, significantly lower than that of soy protein nanoparticles but higher than that of control sample, further confirming that SPP surfaces were completely covered with pectin molecules. Compared with control sample, the three-phase contact angle increased from 42.7 to 90.6°, indicated that SPP could be developed as effective Pickering emulsifiers. The emulsions stabilized by SPP exhibited high thermal stability and excellent salt tolerance as well as good freeze-thaw stability in comparison with emulsions covered with control sample. These findings would provide a potential way of producing effective Pickering emulsifier.GRAPHICAL ABSTRACT     

Real-time membrane fusion of giant polymer vesicles

Membrane fusion is very important for the formation of many complex organs in metazoans throughout evolution, such as muscles, bones, and placentae. Lipid vesicles (liposomes) are frequently used as model membranes to study the fusion process. This work demonstrates for the first time the real-time membrane fusion of giant polymer vesicles by directly displaying a series of high-resolution and real-time transformation images of individual vesicles. The fusion process includes the sequential steps of membrane contact, forming the center wall, symmetric expansion of fusion pore and complete fusion, undergoing the intermediates of "8" shape with a protruding rim at the contact site, peanut (pear) shape, and oblate sphere. The vesicle swells during fusion, and the fusing vesicle only deforms in the neck domain around the fusion pore in the lateral direction, which verifies the importance of the lateral tension on the fusion pore at the vesicle deformation level. The successful fusion of the synthetic and protein-free polymer vesicles reported here also supports that vesicle proximity combined with membrane perturbation suffices to induce membrane fusion, and that the protein is not necessary for the fusion process.     

Ab initio prediction of vibrational spectra: A database approach

Efforts to develop a database of quadratic force fields for organic molecules are described. The database is based on systematic ab initio calculations, scaled to reproduce the experimentally observed frequencies. The choice of the theoretical method, the basis sets, geometries, internal coordinates and the scaling procedure are discussed. A key point in the procedure is the automatic generation of the internal valence coordinates. This is also very advantageous for geometry optimization. The database should permit the prediction of vibrational frequencies for most organic molecules to 10–20 cm⁻¹, together with semiquantitative intensities. The accuracy is sufficient to identify unknown compounds from a list of reasonable candidates.     

Electrocatalytic oxidation of thiosulfate on a modified nickel hexacyanoferrate film electrode

Summary A modified nickel hexacyanoferrate film glassy carbon electrode is prepared by the electrochemical deposition technique. The film is very stable upon voltammetric scanning in the potential range of 1.0 to –0.5 V (vs. SCE) and an oxidation peak occurs at 0.35 V (vs. SCE) (1 mol/l NaNO₃). The effects of electrolyte, solvent, coexisting ions and other variables on the voltammetric behaviour of the modified film have been studied. The thickness of the resulting film can be controlled by changing the number of voltammetric cycles and the concentrations of nickel(II) and hexacyanoferrate(III) ions. The film shows catalytic activity towards electrooxidation of thiosulfate with a peak potential +0.5 V (K^–-containing media). This oxidation potential of thiosulfate on the modified electrode is shifted negatively by about 550 mV as compared to the naked glassy carbon electrode. For practical application, the modified electrode can be used for the determination of thiosulfate in concentrations from 5.0×10^–5 to 1.0×10^–1 mol/l. This method has been successfully applied to the determination of thiosulfate in photographic waste effluents.