An in situ STM study on the long-range surface restructuring of Au(1 1 1) in a non-chloroaluminumated ionic liquid

We report an in situ STM study of a potential-dependent long-range surface restructuring of Au(1 1 1) electrode in neat 1-butyl-3-methylimidazolium tetrafluoroborates (BMIBF₄) ionic liquid. Au(1 1 1) undergoes a significant long-range surface restructuring upon cathodic excursion to −1.0 V vs. Pt quasi-reference. The restructuring involves the formation of tiny pits, which then develops into a stable worm-like network with an average width of the network grids 2 nm. Electrochemical annealing occurs at the cathodic limit with the presence of a reduction product of cation BMI⁺. A smooth surface is recovered with the appearance of the typical (√3 × 22) reconstruction of Au(1 1 1). The surface restructuring is reestablished upon anodic excursion to −1.3 V after the adsorbed reduction product is oxidized. The long-range surface restructuring phenomenon is tentatively explained as a result of partial charge transfer to the weakly adsorbed BMI⁺, which reduces the metal–metal cohesive energy. In addition, the synergetic effect of the counter anion BF₄⁻ may also be involved. The results provide a knowledge of Au(1 1 1) electrode behavior in the neat ionic liquid and are beneficial to understanding in situ STM results involving surface morphological changes in such a media.     

Microchip capillary electrophoresis with amperometric detection for several carbohydrates

Microchip capillary electrophoresis (μCE) with amperometric detection at Cu electrode benefited fast separation and direct detection of carbohydrates. The working electrode of 50-μm Cu wire attached nearly against the channel outlet—4 μm, where it benefited collecting detection current and suppressing overwhelming noise. The use of alkaline medium was essential to separating and detecting carbohydrates, which dissociated into the sensitive alcolate anions. The 10-cm serpentine chip, though lengthening the migration time, it provided better efficiency. Sucrose, cellobiose, glucose, and fructose migrated from the outlet in 400 s +2000 V. The linear calibration plots ranging from 10 to 1000 μM with regression coefficients better than 0.996 were obtained. The injection-to-injection reproducibility of 1.24% (n=7) for glucose in peak current and 0.6% for migration times were excellent. The detection limit was low, down to 2.3 μM for glucose (S/N=3) or 27.6 attomole in mass detection.     

Synthesis and reactivity of 1,2-bis(chlorodimethylgermyl)carborane and 1,2-bis(bromodimethylstannyl)carborane

The 1,2-bis(chlorogermyl)- (1) and 1,2-bis(bromostannyl)carborane (2) have been prepared by the reaction of dilithio-o-carborane with Me(2)GeCl(2) and Me(2)SnBr(2), respectively. Compounds 1 and 2 are found to be good precursors for the synthesis of a variety of cyclization compounds. The Wurtz-type coupling reaction of 1 and 2 using sodium metal afforded the four-membered digerma compound 3 and five-membered tristanna compound 4, respectively. The salt elimination reactions of 1 and 2 using Li(2)N(t)Bu and Li(2)PC(6)H(5) afforded the cyclic products [structure: see text]. The 1,2-bis(dimethylgermyl)carborane 9 and 1,2-bis(dimethylstannyl)carborane 10 were prepared by the reaction of 1 and 2 with sodium cyanoborohydride. The reactions of 9 and 10 with Pd(PPh(3))(4) afforded the bis(germyl)palladium 12 and bis(stannyl)palladium 13 complexes, respectively.     

Synthesis and anti-HIV activity of 3-alkylamido-3-deoxy-betulinic acid derivatives

3-Alkylamido-3-deoxy-betulinic acids were synthesized and evaluated for anti-HIV activity as part of the structure-activity relationship study of the potent anti-HIV agent 3-O-(3',3'-dimethyl)-succinyl-betulinic acid (DSB) (2). 3Alpha-diglycorylamide-3-deoxy-betulinic acid demonstrated relatively potent anti-HIV activity (EC50 0.24 microm, TI 728). However, replacing the ester group at C-3 in 2 and its analogues with an amido group yielded inactive or much less potent compounds against HIV replication, indicating that the ester group at C-3 in 2-4 is essential for potent anti-HIV activity.     

Isomerization ofn-hexane overplatinum loaded zeolites

The effect of the calcination temperature of bifunctional Pt/zeolites on the isomerization ofn-hexane has been investigated. The catalyst calcined at 350°C showed the highest metal dispersity and the best activity. The higher selectivity of dimethylbutanes over Pt/H- than over Pt/H-MOR might be attributed to the combined effect of acidity, channel structure and pore size of zeolites.     

Liquid chromatography particle beam-mass spectrometry with massive cluster impact

A new liquid chromatography-mass spectrometry technique is described that utilizes a particle beam interface to transport and deposit desolvated analyte molecules onto a target surface that is bombarded by a primary beam of massive multiply charged glycerol cluster ions to generate secondary ions for mass analysis. The massive cluster ion beam is generated by electrohydrodynamic emission from a solution of 1. 5-M ammonium acetate in glycerol. In the present instrumental configuration the massive cluster ion gun is placed above the target probe and the particle beam interface is connected through a side port of the mass spectrometer. The massive cluster ion beam and particle beam are intercepted by a target surface substituted for a conventional ion volume. The target surface is positioned such that it is ～ 45 ° to the primary cluster ion beam, the particle beam, and the mass analyzer axis. This geometric orientation represents a compromise among the performances of these three elements. The feasibility of this liquid chromatography-particle beam on-line with massive cluster impact is demonstrated by flow injections of acetylcholine chloride and gramicidin S. Spectra generated from this preliminary study indicate promise for routine liquid chromatography-mass spectrometry of polar compounds by using a robust inlet and an effective generation of secondary ions without an added matrix.     

Low-level determination of plutonium by gamma and L X-ray spectroscopy

We have developed an analytical method for detection of²³⁹Pu in aqueous samples at concentrations as low as 10^–10M. This nuclear counting technique utilizes the uranium L X-rays, which follow the alpha-decay of plutonium. Because L X-rays are specific for the element and not for the individual isotope, the isotopic composition of the plutonium sample must be known. The counting efficiency in the 11–23 keV range is determined from a plutonium standard, and the concentration of the sample is then calculated from the L X-ray count and the isotopic composition. The total L X-ray count is corrected for possible contributions from other radionuclides present as impurities by measuring the low-energy gamma-spectrum for each contaminant to establish specific photon/X-ray ratios. The ratios are important when²⁴¹Pu and²⁴²Pu are measured, because the respective decay chain members produce non-U L X-rays. This new method can replace the use of labor-intensive radiochemical separation techniques and elaborate activation methods for analysis of²³⁹Pu in aqueous samples. It is also applicable for assaying plutonium in liquid wastes that pose possible hazards to the environment.     

The synthesis of phenanthrodibenzothiophenes

The synthesis of phenanthro[1,2-c]dibenzothiophene (6) , phenanthro[4,3-c]dibenzothiophene (10) , phenanthro[2,1-a]dibenzothiophene (14) , phenanthro[3,4-a]dibenzothiophene (16) , phenanthro[1,2-a]dibenzothiophene (19) , phenanthro[2,1-b]dibenzothiophene (20) , 8-methylphenanthro[3,2-a]dibenzothiophene (24) , 7-methylphenanthro[1,2-a]dibenzothiophene (25) , phenanthro[3,4-a]dibenzothiophene (27) , phenanthro[4,3-a]-dibenzothiophene (28) , 6-methylphenanthro[2,3-a]dibenzothiophene (31) , and 5-methylphenanthro[4,3-a]dibenzothiophene (32) is described.     

Fast electron transfer repair of oxidizing OH adduct of dGMP by chlorogenic acid

ＥｘｔｅｎｓｉｖｅｓｔｕｄｉｅｓｏｆｒａｄｉａｔｉｏｎｏｒｃｈｅｍｉｃａｌｉｎｊｕｒｙｏｆｂｉｏｌｏｇｉｃａｌｔａｒｇｅｔｍｏｌｅｃｕｌｅｓｄｅｍｏｎｓｔｒａｔｅｔｈａｔＯＨｒａｄｉｃａｌ,ｔｈｅｍｏｓｔｒｅａｃｔｉｖｅｏｘｙｇｅｎｓｐｅｃｉｅｓ,ｒｅａｃｔｓｗｉｔｈｂｉｏｌｏｇｉｃａｌｍａｃｒｏｍｏｌｅｃｕｌｅｓ,ｓｕｃｈａｓＤＮＡ,ｉｎｄｕｃｉｎｇｂａｓｅａｌｔｅｒａｔｉｏｎｓ,ｂａｓｉｃｓｉｔｅｓ,ａｎｄｓｔｒａｎｄｂｒｅａｋｓ,ｒｅｓｕｌｔｅｄｉｎｖａｒｉｏｕｓｐａｔｈｏｇｅｎｅｓｉｓ,ｓｕｃｈ…     

Synthesis of Insect Sex Pheromones and Their Homologues I. (Z,E)-9, 11-Alkadienyl Acetates

(Z, E)-9, 11-Tetradecadienyl-l-acetate (1), a major component of the sex pheromone of Spodoptera litura (F.), and (Z, E}-9, 11-pentadecadienyl-1-acetate (2) were synthesized by the Wittig reaction between (E)-2-alkenal (3) and the ylid derived from 9-hydroxynonyltriphenylphosphonium bromide (4).