Synthesis and reactions of cubane-type iron-sulfur-phosphine clusters,including soluble clusters of nuclearities 8 and 16

A family of soluble, reduced iron-sulfur clusters with nuclearities 4, 8, and 16 having tertiary phosphine ligation and based on the Fe(4)S(4) cubane-type structural motif has been synthesized. The results of this investigation substantially extend and improve the results of our original work on iron-sulfur-phosphine clusters (Goh, C.; Segal, B. M.; Huang, J.; Long, J. R.; Holm, R. H. J. Am. Chem. Soc. 1996, 118, 11844). A general property of this cluster family is facile phosphine substitution. The clusters [Fe(4)S(4)(PR(3))(4)](+) are precursors to monosubstituted [Fe(4)S(4)(PR(3))(3)X] (X = Cl-, RS-), homoleptic [Fe(4)S(4)(SR)(4)](3-), and all-ferrous monocubanes [Fe(4)S(4)(PR(3))(4)] (R = Pr(i), Cy, Bu(t); generated in solution). In turn, [Fe(4)S(4)(PPr(i)()(3))(3)(SSiPh(3))] and [Fe(4)S(4)(PPr(i)(3))(4)] can be transformed into the dicubanes [Fe(8)S(8)(PPr(i)()(3))(4)(SSiPh(3))(2)] and [Fe(8)S(8)(PPr(i)((3))(6)], respectively. Further, the tetracubanes [Fe(16)S(16)(PR(3))(8)] are also accessible from [Fe(4)S(4)(PR(3))(4)] under different conditions. X-ray structures are described for [Fe(4)S(4)(PCy(3))(3)X] (X = Cl-, PhS-), [Fe(8)S(8)(PPr(i)(3))(4)(SSiPh(3))(2)], [Fe(8)S(8)(PPr(i)()(3))(6)], and [Fe(16)S(16)(PCy(3))(8)]. The monosubstituted clusters show different distortions of the [Fe(4)S(4)](+) cores from idealized cubic symmetry. The dicubanes possess edge-bridged double cubane structures with an Fe(2)(mu(4)-S)(2) bridge rhomb and idealized C(2)(h)() symmetry. The ready cleavage of these clusters into single cubanes is considered a probable consequence of strained bond angles at the mu(4)-S atoms. Tetracubanes contain four individual cubanes, each of which is implicated in two bridge rhombs so as to generate a cyclic structure of idealized D(4) symmetry. Redox properties and M?ssbauer spectroscopic parameters are reported. The species [Fe(4)S(4)(PR(3))(4)] (in solution), [Fe(8)S(8)(PR(3))(6)], and [Fe(16)S(16)(PR(3))(8)] are the only synthetic all-ferrous clusters with tetrahedral iron sites that have been isolated. Their utility as precursors to other highly reduced iron-sulfur clusters is under investigation.     

Spectrofluorimetric determination of thiols by use of N[P-(2-benzoxazolyl)phenyl]maleimide

The weak fluorescence of N-[P-(2-benzoxazolyl)phenyl]maleimide (BOPM) can be greatly enhanced by thiol-containing compounds. A sensitive and simple spectrofluorimetric method based on the use of BOPM has been developed for the determination of thiols such as cysteine (Cys) and reduced glutathione (GSH). Calibration plots were linear in the concentration range from 0 to 1.6 x 10(-7) mol L(-1) for Cys and 0 to 1.7 x 10(-7) mol L(-1) for GSH. The detection limits (3a) were 2.36 x 10(-10) mol L(-1) for Cys and 1.49 x 10(-10) mol L(-1) for GSH. Many other amino acids (present at 100-fold greater concentrations) did not interfere with the determination. The proposed method has been used for the determination of Cys in protein hydrolysate and cystine electrolyte or GSH in serum, with recoveries of 95.4-103.7%.     

改进的微波辅助无溶剂法提取薄荷和陈皮中的挥发油组分

An improved solvent free microwave extraction, in which a kind of microwave absorption medium （carbonyl iron powder） was used, was applied to the extraction of essential oil from dried menthol mint and orange peel without addition of any solvent and pretreatment. It took much less time of extraction （30 min） than microwave-assisted hydrodistillation （90 min） and conventional hydrodistillation （180 min）. The kinds of chemical compositions in essential oil extracted by different methods were almost the same and such improved solvent free microwave extraction can be a feasible way in extraction of essential oil from dried plant materials.     

Cleavage of the Fe—Fe Bond of （Me2SiSiMe2） [η^5－C5H4Fe（CO）2]2 with Na／Hg and Molecular Structure of the Ring－Opened Complex

The reaction of the rifle cyclic complex (1) with sodium amalgam in THF resulted in the expected cleavage of the Fe-Fe bond to afford his-sodium salt ( Me2SiSiMe2 ) [η^5-C5H4Fe(CO)2]2 (4). The latter was not isolated and was used directly to react with MeI, PhCH2Cl, CH3C(O)Cl, PhC(O)Cl,Cy3SnCl (Cy= cyclohexyl) or Ph3SnCl to afford corresponding ring-opened derivatives (Me2SiSiMe2) [η^5-C5H4Fe(CO)2]2 [5, R=Me; 6, R=PhCH2; 7, R=CH3C(O); 8, R=PhC(O); 9, R = Cy3Sn or 10, R = Ph3Sn ]. The crystal and molecular structures of 10 were determined by X-ray diffraction analysis. The molecule took the desired ant/ conformation around the Si-Si bond. The length of the Si--Si bond is 0.2343(3)nm, which is essentially identical to that in the cyclic structure of 1[0.2346(4) tun]. This result unambiguously demonstrates that the Si--Si bond in the cyclic structure of 1 is not subject to obvious strain.     

The boron-catalyzed polymerization of dimethylsulfoxonium methylide. A living polymethylene synthesis

Trialkyl and aryl organoboranes catalyze the polymerization of dimethylsulfoxonium methylide (1). The product of the polymerization is a tris-polymethylene organoborane. Oxidation affords linear telechelic alpha-hydroxy polymethylene. The polymer molecular weight was found to be directly proportional to the stoichiometric ratio of ylide/borane, and polydispersities as low as 1.01-1.03 have been realized. Although oligomeric polymethylene has been the most frequent synthetic target of this method, polymeric star organoboranes with molecular weights of 1.5 million have been produced. The average turnover frequency at 120 degrees C in 1,2,4,5-tetrachlorobenzene/toluene is estimated at >6 x 10(6) g of polymethylene (mol boron)(-1) h(-1). The mechanism of the polyhomologation reaction involves initial formation of a zwitterionic organoborane.ylide complex which breaks down in a rate-limiting 1,2-alkyl group migration with concomitant expulsion of a molecule of DMSO. The reaction was found to be first order in the borane catalyst and zero order in ylide. DMSO does not interfere with the reaction. The temperature dependence of the reaction rate yielded the following activation energy parameters (toluene, DeltaH(++) = 23.2 kcal/mol, DeltaS(++) = 12.6 cal deg/mol, DeltaG(++) = 19.5 kcal/mol; THF, DeltaH(++) = 26.5 kcal/mol, DeltaS(++) = 21.5 cal deg/mol, DeltaG(++) = 20.1 kcal/mol).     

Study on the isolation, purification and physicochemical properties of polysaccharides from Indocalamus tesselatus

Polysaccharides prepared from Chinese traditional medicine "Ruoye" (Indocalamus tesselatus), a kind of bamboo leaves, were studied. Eight crude polysaccharides were isolated from the dried leaves by successive extraction with 85% ethanol (FE), 0.9% sodium chloride (FS), hot water (FI), 1% ammonium oxalate (FII), 5% NaOH (FIII-a, FIII-b) and 20% NaOH (FIV-a, FIV-b). They were decolorized by hydrogen peroxide treatment and the protein was removed with Savag's method. The polysaccharides were precipitated by three volumes of absolute ethanol. After further purification by gel filtration chromatography on a Sephadex G-200 column, these polysaccharides were lyophilized. Their physicochemical properties and structural feature were elucidated by modern analytical technique such as UV, elemental analysis and high performance gel permeation chromatography. From the results of partial hydrolysis, FE and FIII-b have a main chain comprised solely of glucuronic acid and xylose residues, respectively.     

A New Anthraquinone from Clinopodium polycephalum Glyceroyl-1,6,8-trihydroxy-3-methyl-9,10-dioxo-2-anthracene Carboxylate

ClnOPodiumpoIycePhalum(VantjCYWhetHsuancalled'DuanXielin'inChineseisusedinfolkmedicineforthetreatInentofhaemorrhagiadisease.lInordertofmdtheactivecomPounds,studiesonthechedricalconstituentsofthewholeplan,collectedatHuoShanofAnhuiprovince,werecarriedout.Fromthealcoholicextracts,wehaveisolatedanewanthraquinone,Glyceroyl-l,6,8-trihydroxy-3-methyl-9)lO-dioxo-2-anthrcenecarboxylateI(Figurel).Iwasobtainedasredneedles,mP:ll9-l2l"C.TheHR-MSdareaffordedthefor-mulaasCl9Hl6O9(Found388.O791;…     

Simultaneous Determination of Four Active Components in a Compound Formulation by Liquid Chromatography

Summary A rapid and accurate LC method is described for simultaneous determination of pseudoephedrine hydrochloride (PSE), acetaminophen (AMP), dextromethorphen hydrobromide (DEX), and diphenhydramine hydrochloride (DPH) in a compound formulation. Chromatographic separation of the four drugs was achieved on a Hypersil CN column (150 mm × 4.6 mm, 5 m particle) by use of a mobile phase comprising a mixture of 3 mM ion-pairing solution, 2% aqueous triethylamine solution, and 2 M phosphoric acid, 68:48:88 (v/v), pH 3.0, delivered at 1.0 mL min^–1. Compounds were detected at 215 nm and the run time was less than 10 min. The linearity, accuracy, and precision of the method were found to be acceptable over the concentration ranges 6.1–36.4 g mL^–1 for PSE, 65.0–390.0 g mL^–1 for AMP, 3.1–18.6 g mL^–1 for DEX, and 5.0–30.0 g mL^–1 for DPH.     

内同构环与内异环的结构

所有真子环都同构的结合环,称为内同构环,任两不同的子环都不同构的结合环,称为内异环.本文目的是给出内同构环与内异环的一些结构定理,从而基本上解决了Szasz F.A.提出的问题81:怎样的结合环,它的不同子环总不同构?