A Monte Carlo code to get response spectrum of ions for Neutron Depth Profiling

This paper presents a Monte Carlo code to get response spectrum of ions for the Neutron Depth Profiling (NDP) technique called Monte Carlo NDP (MC-NDP) that simulates the behavior of ions transmitted through a sample matrix and generates the energy spectrum for a specified detector. The MC-NDP model is based on the Ziegler–Biersack–Littmark Model, but incorporates the advantages of TRIM and CORTEO. The Impulse Approximation method is used to determine the flight length with the indexical interpolation method rather than the Magic algorithm for the scattering angle between ions and nucleus. This makes MC-NDP more efficient and convenient to simulate entire ion histories by a Monte Carlo approach. MC-NDP’s results agree well with both TRIM results and the experimental data.     

Hydrophilic Conjugated Polymers with Large Bandgaps and Deep‐Lying HOMO Levels as an Efficient Cathode Interlayer in Inverted Polymer Solar Cells

Two hydrophilic conjugated polymers, PmP‐NOH and PmP36F‐NOH, with polar diethanol­amine on the side chains and main chain structures of poly(meta‐phenylene) and poly(meta‐phenylene‐alt‐3,6‐fluorene), respectively, are successfully synthesized. The films of PmP‐NOH and PmP36F‐NOH show absorption edges at 340 and 343 nm, respectively. The calculated optical bandgaps of the two polymers are 3.65 and 3.62 eV, respectively, the largest ones so far reported for hydrophilic conjugated polymers. PmP‐NOH and PmP36F‐NOH also possess deep‐lying highest occupied molecular orbital levels of −6.19 and −6.15 eV, respectively. Inserting PmP‐NOH and PmP36F‐NOH as a cathode interlayer in inverted polymer solar cells with a PTB7/PC₇₁BM blend as the active layer, high power conversion efficiencies of 8.58% and 8.33%, respectively, are achieved, demonstrating that the two hydrophilic polymers are excellent interlayers for efficient inverted polymer solar cells.

     

基于电磁拓扑的多腔体屏蔽效能快速算法

提出基于电磁拓扑理论计算开孔多腔体屏蔽效能的快速方法.首先给出双腔体等效电路和电磁拓扑信号流图,并推导孔缝节点处的散射矩阵,给出拓扑网络的散射矩阵方程和传输矩阵方程,获得双腔体的广义Baum-Liu-Tesche(BLT)方程.在此基础上研究了开孔三腔体,包括串型级联三腔体和串并型混合级联三腔体的广义BLT方程.对于串型级联三腔体,其电磁拓扑网络和广义BLT方程在双腔体基础上直接扩展即可获得.而对于串并型混合级联三腔体,通过将位于三腔体公共面上的孔缝等效为三端口网络节点,并根据三端口网络散射参数定义推导获得该节点的散射矩阵,最终得到串并型混合级联三腔体的广义BLT方程.本文方法对双腔体的计算结果与文献结果和实验结果相符合,对3组不同类型和尺寸开孔腔的屏蔽效能的计算结果与时域有限差分法计算结果符合较好.该算法不仅效率高,通过对所有计算结果和实验结果的误差统计分析,表明该算法具有较高的计算准确度.     

Distributed Bragg reflector laser(1.8 μm) with 10 nm wavelength tuning range

We report a 1.8 μm two-section distributed Bragg reflector laser using butt-jointed In Ga As P bulk material as the waveguide core layer. The threshold current is 17 m A and the output power is 8 m W on average. The threshold current, output power, and emitting wavelength dependences on temperature are measured. The obtained wavelength tuning range is 10 nm. This device has potential applications in simultaneous multiple-gas detection.     

Hydrophilic–oleophobic coatings on cellulosic materials by plasma assisted polymerization in liquid phase and fluorosurfactant complexation

Materials with hydrophilic–oleophobic properties are of relevance due to their application to different fields such as self-cleaning coatings, liquid–liquid separation membranes and functional textiles for different technical applications. In this work, hydrophilic–oleophobic coatings have been deposited on cellulosic materials (filter paper and bleached cotton) by means of plasma assisted polymerization of acrylic acid solutions in water followed by cationic fluorosurfactant complexation. Chemical composition of the coatings on cellulosic materials was characterized by means of FTIR–ATR and XPS whereas their morphology was studied by SEM. Hydrophilic–oleophobic behavior was characterized by means of contact angle and wetting time. Additionally wetting properties of cationic, anionic and non-ionic surfactant solutions on the hydrophilic–oleophobic coatings were used to characterize the polyelectrolyte electrostatic forces upon the functionalized layer.     

Palladium‐Catalyzed Decarboxylative Cycloaddition of Vinylethylene Carbonates with Formaldehyde: Enantioselective Construction of Tertiary Vinylglycols

An efficient method for the enantioselective construction of tertiary vinylglycols through a palladium‐catalyzed asymmetric decarboxylative cycloaddition of vinylethylene carbonates with formaldehyde was developed. By using a palladium complex generated in situ from [Pd₂(dba)₃]?CHCl₃ and a phosphoramidite ligand as a catalyst under mild reaction conditions, the process allows conversion of racemic 4‐substituted 4‐vinyl‐1,3‐dioxolan‐2‐ones into the corresponding 1,3‐dioxolanes, as methylene acetal protected tertiary vinylglycols, in high yields with good to excellent enantioselectivities.     

Three dimension Liesegang rings of calcium hydrophosphate in gelatin

Three dimensional Liesegang spherical layers of CaHPO₄ in gelatin ball were performed by employing CaCl₂ and Na₂HPO₄ as the inner and outer electrolyte, respectively. Effects of concentrations of inner and outer electrolyte as well as pH on the morphologies of Liesegang rings (LRs) were investigated. As a result, it was observed that the time law, spacing law and width law found in 1D/2D gel systems were obeyed in this 3D gelatin system. The interaction of Ca²⁺ and HPO₄ ^2? with gelatin matrix played a key role to the formation of LRs due to the existence of carboxylic groups on the gelatin chains. Using Ca²⁺ as the inner electrolyte, LRs were prepared. However, employing HPO₄ ^2? as inner electrolyte, LRs were not obtained. Moreover, pH of gelatin solution greatly impacted on the formation of LRs. The number of LRs increased with the decrease of pH, whereas the width inversely decreased. pH 4.40 was a turn point, from which the spacing coefficient abruptly increased as pH increased. All these results indicated that the network was created by the interaction of Ca²⁺ and –COO^? of gelatin chains, which dominated the formation of CaHPO₄ LRs in gelatin.     

Towards Long‐Term Photostability of Nickel Hydroxide/BiVO4 Photoanodes for Oxygen Evolution Catalysts via In Situ Catalyst Tuning

Increasing long‐term photostability of BiVO₄ photoelectrode is an important issue for solar water splitting. The NiOOH oxygen evolution catalyst (OEC) has fast water oxidation kinetics compared to the FeOOH OEC. However, it generally shows a lower photoresponse and poor stability because of the more substantial interface recombination at the NiOOH/BiVO₄ junction. Herein, we utilize a plasma etching approach to reduce both interface/surface recombination at NiOOH/BiVO₄ and NiOOH/electrolyte junctions. Further, adding Fe²⁺ into the borate buffer electrolyte alleviates the active but unstable character of etched‐NiOOH/BiVO₄, leading to an outstanding oxygen evolution over 200 h. The improved charge transfer and photostability can be attributed to the active defects and a mixture of NiOOH/NiO/Ni in OEC induced by plasma etching. Metallic Ni acts as the ion source for the in situ generation of the NiFe OEC over long‐term durability.