SiO2与Keggin杂多酸相互作用的研究

采用经典酸化与乙醚萃取相结合的方法，制备了Keggin型杂多酸H3PMo12O40，并以SiO2为载体制备了经不同温度焙烧的负载型杂多酸样品，利用TG、DTA、IR、XPS、NH3－TPD等手段，对负载前后的杂多酸样品进行了表征；考察了SiO2与杂多酸之间的相互作用以及载体对杂多酸酸性的影响，研究发现，SiO2载体的引入，可以有效改善杂多酸的热稳定性，焙烧温度的升高，会显著降低杂多酸的酸性，并提出SiO2杂多酸的相互作用方式。     

微波常压法合成水杨酸酯

在浓硫酸催化下，采用微波常压法由水杨酸分别与正丁醇、异丁醇、正戊醇和异戊醇反应合成相应的水杨酸酯。结果表明：当水杨酸：醇：Ｈ２ＳＯ４＝１：５．５：０．３（摩尔比）时，采用５６０Ｗ微波辐射２２ｍｉｎ，水杨酸酯的产率可达８８．７％￣９６．４％，反应速度至少是常规反应的１４倍。     

π键及大π键对正电集团和负电集团的作用——分子间引力的选择性

The selectivity of intermolecular force is caused by the special interaction between two adaptable groups on the molecules. π bond and conjugated π bonds such as benzene ring are negative charged groups,which may attract stongly positively charged H groups such as 3H in β-C_6H_6Cl_6, and repulse other ne- gatively charged groups such as-C=O(Q). Our experiments show that the reduced retention time tr of benzene on non- polar β-C_6H_6Cl_6 is much greater than that on polar fixed phases such as CH_3— —NO_2 in gas chromatography and that the het of solvation of β-C_6H_6Cl_6 in benzene is also much greater than that of the polar α-C_6H_6Cl_6 and γ-C_6H_6Cl_6. This can′t be explained by the usual Van de Waals′ force. It results from the selective intermoleccular force....     

希土Eu(Ⅲ)与2-丙酰-茚满二酮-1,3的二元、三元配合物的合成、表征及发光性能研究

合成2-丙酰-茚满二酮-1,3及其Eu(Ⅲ)的二元、三元固态配合物,经化学分析、元素分析确定了配合物的化学组成,通过红外光谱、紫外光谱进行表征,用配合物的荧光光谱和配体低温磷光光谱分析了配合物的荧光强度和能有效发光的原因.     

MOLECULAR DESIGN SYNTHESIS AND PROPERTIES OF SIX KINDS OF MULTIPHASE (STYRENE-ETHYLENE OXIDE)COPOLYMERS

Multiphase copolymers of styrene (S) and ethylene oxide (EO) are amphiphilic, because of the hydrophobic and amorphous polystyrene (PS) segments and the hydrophilic and crystalline polyoxyethylene (PEO). They have many uses including polymeric surfactants, electrostatic charge reducers, compatibilizer in polymer     

裂解色谱法研究PMR型聚酰亚胺前体的反应过程

用裂解气相色谱法研究ＰＭＲ型聚酰亚胺前体在反应中的化学变化过程，以裂解产物醇和环戊二烯的生成率表示酰胺化或酰亚胺化及交联的程度，结果表明，酰胺化或酰亚胺化在５０℃以下不发生，在１８０～２２０℃完成，降冰片烯端基在１５０℃以下不发生交联反应，在２８０℃，１０～１８小时可完成交联反应。     

碲氢化钠与胺烷基化苯并三氮唑的反应

碲氢化钠是一个用途广泛的磁试剂,自作为有用的去溴试剂以来,日益受到化学工作者的关注,不断有文献报道它的合成及应用.例如能有效地还原卤代烃、硝基化合物、叠氮化合物和亚胺等.近年来,Katritzky报道了胺烷基化苯并三氮唑衍生物的合成及应用,此衍生物中的苯并三氮唑基是很好的离去基团,易被各种亲核试剂所取代.我们在前文中对硒氢化钠与胺烷基化苯并三氮唑反应生成二苄基二硒醚的合成进行了报道.本文用碲氢化钠与胺烷基化苯并三氮唑反应,结果生成还原产物N-取代胺.     

高分辨双晶XRF研究酞菁化合物中硫杂质的化学态

酞菁化合物是一种大π键共轭体系的平面分子结构，它以颜色鲜艳、化学稳定性和价格便宜等特点，已在颜料工业上得到了广泛地应用．随着高科技的发展，酞菁化合物的应用进入静电复印的领域．研究中发现：酞普化合物的晶体结构直接影响它的色泽、耐热性、稳定性以及光电导性．在诸多的酸苦晶型中，β-型酞菁是比较稳定的一种，其它晶型届亚稳态型．近年来，光敏性较好的X-型用于激光印刷机感光鼓的载流子产生层［1］．用作静电复印中的酞育粗颜料，一般多为a一型，且含有大量的有机和无机杂质[2]，经高温真空升华提纯后，转变为卢一型．有趣…     

Tunable magnetic arrangement of iron oxide nanoparticles in situ synthesized on the solid substrate from diblock copolymer micelles

Hexagonal arrangement of iron oxide nanoparticles was fabricated by utilizing a single-layered film of diblock copolymer micelles. The synthesis was directly performed on the solid substrate by oxygen plasma with preserving the dimensional order of micelles so that separate procedures for synthesis and deposition of nanoparticles were not necessary. Since the oxygen plasma treatment also eliminated polymers, pure patterns of iron oxide nanoparticles were obtained. Moreover, easy control over the size of nanoparticles enabled us to selectively create a ferrimagnetic or a superparamagnetic pattern of iron oxide nanoparticles without altering the fabrication process.     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.