Vinyl Polymerization. 439. Vinyl Polymerization Initiated by Poly(Ethylene Glycol] Diglycolic Acid or its Sodium Salt

Abstract

The polymerization of some kinds of vinyl monomer was found to occur in aqueous solutions of poly(ethylene glycol) diglycolic acid (PEG Acid) or sodium poly(ethylene glycol) diglycolate (PEG Acid Na) through radical mechanisms without any further initiator, as a so-called “uncatalyzed polymerization.” Although the initiating radical species for PEG Acid was determined to be the same as that for PEG Acid Na by means of the spin-trapping technique, the initiating ability of PEG Acid was higher than that of PEG Acid Na. These results are assumed to be attributable to the difference in the initiation mechanisms of the two systems and in the incorporating abilities of monomer into the hydrophobic areas formed by PEG Acid and PEG Acid Na.     

Vinyl Polymerization. 436. Effect of Magnetic Field on Uncatalyzed Polymerization

The radical polymerization of vinyl monomers initiated with several kinds of hydrophilic macromolecule was carried out in a magnetic field. The magnetic field promoted the polymerization; the conversion of monomers and the molecular weight of the polymers obtained increased with increasing field strength in the range of 0–0.1 T. The dependence of the composition and tacticity of the mother polymer on the magnitude of the magnetic field was studied. Using graft or block copolymers, which consisted of hard and soft segments, the effect of a magnetic field was further investigated. The degree of hardness and tightness of the hydrophobic areas (reaction areas) formed by the mother polymer in the aqueous solution was found to affect the magnetic field effect on the uncatalyzed polymerization. The overall activation energy obtained in the magnetic field was almost equal to that obtained without a magnetic field.     

Characterization of posticlure and the structure-related sex pheromone candidates prepared by epoxidation of (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes

trans-11,12-Epoxy-(6Z,9Z)-6,9-henicosadiene (posticlure) has been identified from a pheromone gland of the lymantriid species, Orgyia postica. Since the diversity of Lepidoptera suggests that some species utilize the structure-related epoxy compound as a sex pheromone component, epoxydienes and epoxytrienes derived from (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes with a C₁₉–C₂₁ chain were systematically synthesized and the chemical data were accumulated in order to contribute to a new pheromone research. Peracid oxidation of each triene and each tetraene produced, respectively, a mixture of three epoxydienes (cis-6,7-epoxy-9,11-diene; cis-9,10-epoxy-6,11-diene; and trans-11,12-epoxy-6,9-diene) and four epoxytrienes (cis-3,4-epoxy-6,9,11-triene; cis-6,7-epoxy-3,9,11-triene; cis-9,10-epoxy-3,6,11-triene; and trans-11,12-epoxy-3,6,9-triene). While the 9,10-epoxy compounds were unstable and, interestingly, converted into 9-ketone derivatives after chromatography over SiO₂, each positional isomer was isolated by HPLC equipped with an ODS column, and the chemical structure was determined by NMR analysis. On the GC-MS analysis with a DB-23 column, the positional isomers were also eluted separately and characteristic mass spectra were proposed. By comparing the spectral data of the epoxy compounds with a different carbon chain, diagnostic fragment ions reflecting the chemical structure were determined as follows: m/z 79, 109, 113, and M-114 for the 6,7-epoxydienes; m/z 69, 97, 111, 139, and M-111 for the 9,10-epoxydienes; m/z 57, 79, 109, 136, M-151, and M-111 for the 11,12-epoxydienes; m/z 79, 91, 105, and 119 for the 3,4-epoxytrienes; m/z 79, 124, M-124, M-96, and M-69 for the 6,7-epoxytrienes; m/z 79, 95, 109, 137, and M-108 for the 9,10-epoxytrienes; and m/z 79, 134, M-149, M-109, and M-95 for the 11,12-epoxytrienes.     

One‐Pot Synthetic Procedure for2,2′‐Disubstituted Biaryls via the Suzuki Coupling Reaction of Aryl Triflates in a Biphasic Solvent System

A one‐pot synthetic procedure for 2,2′‐disubstituted biaryls was developed via a Suzuki cross‐coupling reaction of aryl triflates in a biphasic solvent system. The effects of various bases and solvents were investigated. Results showed that the Na₂CO₃–toluene/H₂O combination gave the highest yields.     

Synthesis of 1-Hydroxyoxindoles

A convenient synthesis of various substituted 1-hydroxyoxindoles is described.     

Selective detection of polyaromatic hydrocarbons on diesel exhaust particles using sputtered neutral mass spectrometry

Aiming for the highly sensitive analysis of aromatic hydrocarbons in organic mixtures, selective ionization using an ultraviolet laser ionization technique was examined for the determination of sputtered neutral species on organic surfaces. The mass spectrum of a model mixture containing pyrene and n‐alkane showed that only pyrene was ionized and detected, whereas a mass spectrum without laser irradiation, i.e. in the case of secondary ion mass spectrometry, was dominated by many n‐alkane fragment peaks. This technique was applied for the detection of polyaromatic hydrocarbons adsorbed on diesel exhaust particles. Two kinds of polyaromatic hydrocarbons were clearly detected because many aliphatic fragment signals were suppressed by means of ultraviolet laser ionization. Copyright © 2013 John Wiley & Sons, Ltd.     

Photocycloaddition reaction of methyl 2- and 3-chromonecarboxylates with various alkenes

The irradiation of methyl 2- and 3-chromonecarboxylate in the presence of various alkenes afforded cyclobutane type adducts, whose structures were established by X-ray structural analysis. Methyl 2-chromonecarboxylate showed higher photochemical reactivity than methyl 3-chromonecarboxylate, in which endo adducts were yielded as major products.     

Fast Li-Ion Conduction in Spinel-Structured Solids

Spinel-structured solids were studied to understand if fast Li⁺ ion conduction can be achieved with Li occupying multiple crystallographic sites of the structure to form a “Li-stuffed” spinel, and if the concept is applicable to prepare a high mixed electronic-ionic conductive, electrochemically active solid solution of the Li⁺ stuffed spinel with spinel-structured Li-ion battery electrodes. This could enable a single-phase fully solid electrode eliminating multi-phase interface incompatibility and impedance commonly observed in multi-phase solid electrolyte–cathode composites. Materials of composition Li_1.25M(III)_0.25TiO₄, M(III) = Cr or Al were prepared through solid-state methods. The room-temperature bulk Li⁺-ion conductivity is 1.63 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄. Addition of Li₃BO₃ (LBO) increases ionic and electronic conductivity reaching a bulk Li⁺ ion conductivity averaging 6.8 × 10⁻⁴ S cm⁻¹, a total Li-ion conductivity averaging 4.2 × 10⁻⁴ S cm⁻¹, and electronic conductivity averaging 3.8 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄ with 1 wt. % LBO. An electrochemically active solid solution of Li_1.25Cr_0.25Mn_1.5O₄ and LiNi_0.5Mn_1.5O₄ was prepared. This work proves that Li-stuffed spinels can achieve fast Li-ion conduction and that the concept is potentially useful to enable a single-phase fully solid electrode without interphase impedance.