Propagating transverse electric and transverse magnetic modes in liquid crystal-clad planar waveguides

ABSTRACT

In a planar dielectric waveguide, weak confinement of a propagating mode in a high index core leads to a measurable evanescent interaction with the cladding. In this work, we study the effect of a reorientable anisotropic cladding on the behaviour of Transverse Electric (TE) and Transverse Magnetic (TM) mode polarisations using a liquid crystal (LC)-clad waveguide architecture. The polarised evanescent field of a guided mode interacts with a voltage-tunable birefringent LC cladding to deflect an out-coupled beam. Experimental measurements are coupled with a theoretical framework and show good consistency with simulation results. We isolate the effect of mode confinement by changing the thickness of the high index core. Interactions between the LC index ellipsoid and the mode polarisation are probed by changing the initial alignment of the LC. Finally, we examine the difference in deflection between TE and TM modes, which incorporates both a change in mode confinement and a difference in LC index components.     

Anisole hydrogenation with well-characterized polyoxoanion- and tetrabutylammonium-stabilized Rh(0) nanoclusters: effects of added water and acid, plus enhanced catalytic rate, lifetime, and partial hydrogenation selectivity

Following a comprehensive look at the arene hydrogenation literature by soluble nanocluster catalysts, six key, unfulfilled goals in nanocluster arene hydrogenation catalysis are identified. To begin to address those six goals, well-characterized polyoxoanion- and tetrabutylammonium-stabilized Rh(0) nanoclusters have been synthesized by the reduction of the precisely defined precatalyst [Bu(4)N](5)Na(3)[(1,5-COD)Rh small middle dotP(2)W(15)Nb(3)O(62)] with H(2) in propylene carbonate solvent. These Rh(0) nanoclusters are characterized by their stoichiometry of formation, transmission electron microscopy, and the two rate constants which characterize their mechanism of formation; previous studies in our laboratories have provided additional characterization of polyoxoanion-stabilized Rh(0) nanoclusters. Propylene carbonate solutions of the Rh(0) nanoclusters catalyze the hydrogenation of anisole (methoxybenzene) under mild conditions (22-78 degrees C, 30-40 psig H(2)). Proton donors such as water or HBF(4) small middle dotEt(2)O are discovered to affect both nanocluster formation and nanocluster arene hydrogenation catalysis. Under identical conditions, the Rh(0) nanoclusters are 10-fold more active than a commercially available, oxide-supported 5% Rh/Al(2)O(3) catalyst of the same average metal-particle size. A series of lifetime experiments shows that the Rh(0) nanoclusters are capable of at least 2600 total turnovers (TTO), a lifetime significantly longer than the approximately 100 TTO often seen for nanocluster arene hydrogenation catalysts, and a lifetime slightly better than the prior record of 2000 TTO for a literature nanocluster system. The present polyoxoanion-stabilized Rh(0) nanoclusters also display a record, albeit modest, 30% selectivity for the partial hydrogenation of anisole to 1-methoxycyclohexene with an overall yield of up to 8% at higher temperatures. In comparison to the 5% Rh/Al(2)O(3) catalyst, the polyoxoanion-stabilized nanoclusters yield a 4.7-fold higher maximum yield of 1-methoxycyclohexene. Finally, the seven main findings of the present work are summarized, including how they address five of the aforementioned six main goals in nanocluster arene hydrogenation.     

Amphiphilic treelike rods at interfaces: layered stems and circular aggregation

Amphiphilic dendron-rod molecules with three hydrophilic poly(ethylene oxide) (PEO) branches attached to a hydrophobic octa-p-phenylene rod stem were investigated for their ability to form two-dimensional micellar structures on a solid surface. A treelike shape of the molecules was reported to be a major factor in the formation of nonplanar micellar structures in solution and in the bulk state (cylindrical and spherical). We observed that in these treelike amphiphilic molecules the hydrophilic terminated dendron branches assemble themselves in surface monolayers with the formation of two-dimensional layered or circular micellar structures. We suggested the formation of the planar ribbon-like structures with interdigitated layering within the loosely packed monolayers and circular, ringlike structures (2D circular aggregates) in the precollapsed state.     

Utilization of 1-oxa-2,2-(dimesityl)silacyclopentane acetals in the stereoselective synthesis of polyols

We have developed a route for the stereoselective synthesis of 1-oxa-2,2-(dimesityl)silacyclopentane acetals, intermediates in the synthesis of highly functionalized 1,3-diols. This route involves a diastereoselective conjugate addition reaction of a hydrosilyl anion, a subsequent diastereoselective enolate alkylation, and a fluoride-catalyzed intramolecular hydrosilylation reaction to afford the oxasilacyclopentane acetal. A highly selective nucleophilic substitution reaction, followed by oxidation of the C-Si bond, leads to the desired polyol.     

A copper-catalyzed C-N bond formation involving sp-hybridized carbons. A direct entry to chiral ynamides via N-alkynylation of amides

A copper-catalyzed new C-N bond formation involving a sp-hybridized carbon is described here leading to a facile entry for syntheses of chiral ynamides. This direct N-alkynylation of amides should have a significant impact on the future development of synthetic methodologies employing ynamides.     

Simultaneous light emission from a mixture of dendrimer encapsulated chromophores: a model for single-layer multichromophoric organic light-emitting diodes

The site isolation of two dyes capable of electronic interaction via Forster energy transfer has been studied with the two dyes coumarin 343 and pentathiophene encapsulated by dendrons containing both solubilizing and electroactive moieties. Photoluminescence studies of mixtures of the dendritic dyes show that at high dendron generation, significant site isolation is achieved with relative emission characteristics influenced by both the degree of site isolation and the emission quantum yield of the dyes. Electroluminescence studies carried out in organic light emitting diode devices confirm that color tuning may be achieved by mixing the two encapsulated dyes in a single layer. However, selective carrier trapping by one of the core component dyes can dramatically influence the effectiveness of other components in the device.     

Hydroxyl radical probe of the calmodulin-melittin complex interface by electrospray ionization mass spectrometry

The calcium-dependent interaction of calmodulin and melittin is studied through the application of a radical probe approach in which solutions of the protein and peptide and protein alone are subjected to high fluxes of hydroxyl and other oxygen radicals on millisecond timescales. These radicals are generated by an electrical discharge within an electrospray ion source of a mass spectrometer. Condensation of the electrosprayed droplets followed by proteolytic digestion of both calmodulin and melittin has identified residues in both which participate in the interaction and/or are shielded from solvent within the protein complex. Consistent with other theoretical models and available experimental data, the tryptophan residue of melittin at position 19 is shown to be critical to the formation of the complex with the C-terminal domain of peptide enveloped by and protected from oxidation upon binding to the protein. Furthermore, the N-terminal domain (to residue 36) and tyrosine at position 99 in calmodulin are significantly protected from limited oxidation upon the binding of melittin while exposing the phenylalanine residue at position 92 of the flexible loop domain. The N-terminus (through residue 36) of calmodulin is shown to lie in closer proximity to the melittin helix than its C-terminal counterpart (residues 127-148) based upon the protection levels measured at reactive residues within these segments of the protein.     

A study of method robustness for arsenic speciation in drinking water samples by anion exchange HPLC-ICP-MS

Regulating arsenic species in drinking waters is a reasonable objective, since the various species have different toxicological impacts. However, developing robust and sensitive speciation methods is mandatory prior to any such regulations. Numerous arsenic speciation publications exist, but the question of robustness or ruggedness for a regulatory method has not been fully explored. The present work illustrates the use of anion exchange chromatography coupled to ICP-MS with a commercially available "speciation kit" option. The mobile phase containing 2 mM NaH(2)PO(4) and 0.2 mM EDTA at pH 6 allowed adequate separation of four As species (As(III), As(V), MMAA, DMAA) in less than 10 min. The analytical performance characteristics studied, including method detection limits (lower than 100 ng L(-1) for all the species evaluated), proved the suitability of the method to fulfill the current regulation. Other parameters evaluated such as laboratory fortified blanks, spiked recoveries, and reproducibility over a certain period of time produced adequate results. The samples analyzed were taken from water utilities in different areas of the United States and were provided by the U.S. EPA. The data suggests the speciation setup performs to U.S. EPA specifications but sample treatment and chemistry are also important factors for achieving good recoveries for samples spiked with As(III) as arsenite and As(V) as arsenate.     

Investigations into the parallel kinetic resolution of 2-phenylpropanoyl chloride using quasi-enantiomeric oxazolidinones

The resolution of 2-phenylpropanoyl chloride using an equimolar combination of quasi-enantiomeric oxazolidinones is discussed. The levels of diastereoselectivity were found to be dependent upon the structural nature of the metallated oxazolidinone, temperature and metal counter-ion.     

Cyclopentadiene annulated polycyclic aromatic hydrocarbons: investigations of electron affinities

The adiabatic electron affinities of cyclopentadiene and 10 associated benzannelated derivatives have been predicted with both density functional and Hartree-Fock theory. These systems can also be regarded as benzenoid polycyclic aromatic hydrocarbons (PAHs) augmented with five-membered rings. Like the PAHs, the electron affinities of the present systems generally increase with the number of rings. To unequivocally bind an electron, cyclopentadiene must have at least two conventionally fused benzene rings. 1H-Benz[f]indene, a naphthalene-annulated cyclopentadiene, is predicted to have a zero-point energy corrected adiabatic electron affinity of 0.13 eV. Since the experimental E(A) of naphthalene is negative (-0.19 eV), the five-membered ring appendage contributes to the stability of the naphthalene-derived 1H-benz[f]indene radical anion significantly. The key to binding the electron is a contiguous sequence of fused benzenes, since fluorene, the isomer of 1H-benz[f]indene, with separated six-membered rings, has an electron affinity of -0.07 eV. Each additional benzene ring in the sequence fused to cyclopentadiene increases the electron affinity by 0.15-0.65 eV: the most reliable predictions are cyclopentadiene (-0.63 eV), indene (-0.49 eV), fluorene (-0.07 eV), 1H-benz[f]indene (0.13 eV), 1,2-benzofluorene (0.25 eV), 2,3-benzofluorene (0.26 eV), 12H-dibenzo[b,h]fluorene (0.65 eV), 13H-indeno[1,2-b]anthracene (0.82 eV), and 1H-cyclopenta[b]naphthacene (1.10 eV). In contrast, if the six-membered ring-fusion is across the C(2)-C(3) cyclopentadiene single bond, only a single benzene is needed to bind an electron. The theoretical electron affinity of the resulting molecule, isoindene, is 0.49 eV, and this increases to 1.22 eV for 2H-benz[f]indene. The degree of aromaticity is responsible for this behavior. While the radical anions are stabilized by conjugation, which increases with the size of the system, the regular indenes, like PAHs in general, suffer from the loss of aromatic stabilization in forming their radical anions. While indene is 21 kcal mol(-1) more stable than isoindene, the corresponding radical anion isomers have almost the same energy. Nucleus-independent chemical shift calculations show that the highly aromatic molecules lose almost all aromaticity when an extra electron is present. The radical anions of cyclopentadiene and all of its annulated derivatives have remarkably low C-H bond dissociation energies (only 18-34 kcal mol(-1) for the mono-, bi-, and tricyclics considered). Hydrogen atom loss leads to the restoration of aromaticity in the highly stabilized cyclopentadienyl anion congeners.