顶空固相微萃取-气相色谱-质谱法测定废水中痕量挥发性烷基硫化物

建立了顶空固相微萃取(HS-SPME)和气相色谱/质谱(GC/MS)联用测定人工湿地废水中的痕量挥发性烷基硫化物的方法。针对废水中两种主要的挥发性烷基硫化物(二甲基硫、二甲基二硫),详细研究了萃取纤维头的种类、萃取时间、萃取温度、pH值、离子强度、样品量及解析条件对HS-SPME的影响。载气为高纯氦气,流速为1.0mL/min,色谱柱为DB-5ms毛细管柱(0.25μm,30m×0.32mm),柱温:25℃(5min)■40℃(1min)■60℃(5min);在优化的实验条件下,本法测定二甲基硫及二甲基二硫的线性范围分别为10～10000ng/L和1～10000ng/L;检出限(3σ)分别为1.9ng/L和1.8ng/L;相对标准偏差小于10%;回收率分别为81.0%～94.6%和84.0%～100.9%。用二乙基硫为内标物质,将本法用于人工湿地废水中主要的烷基硫化物二甲基硫和二甲基二硫的测定,获得满意结果。     

微量吸附量热技术在NH2-SBA-15合成中的应用

采用共价接枝法, 以氨丙基-三乙氧基硅烷为氨源, 制备了一系列的NH2-SBA-15催化剂, 通过微量吸附量热技术定量地分析了该催化剂表面碱性中心的强度、数量和分布状态. 实验结果表明, SBA-15在 550 ℃焙烧6 h, 氨基硅源与SBA-15质量比为1.5, 是合成NH2-SBA-15催化剂最适宜的条件. 运用微量吸附量热技术实现了对NH2-SBA-15催化剂合成条件的优化.     

Voltammetric determination of buspirone

The electroanalytical chemical properties of buspirone are reported in this paper. A sensitive single sweep voltammetric procedure for trace buspirone determination was developed. The detection limit is 5.0 x 10(-9)M. The method has been applied to the determination of buspirone in blood serum by simple dilution in a buffer.     

希土胺羧酸配合物的研究——Ⅲ.吡啶-2,6-二甲酸钕配合物{[Nd(HDPA)(DPA)(H2O)2]·4H2O}n合成及其晶体结构

关于吡啶-2,6-二甲酸希土配合物晶体结构有Na₃[Ln(DPA)₃]·yNaClO₄·xH₂O类型的报道^[1]。本文合成了{[Nd(HDPA)(DPA)(H₂O)₂]·4H₂O}_n。配合物单晶并测定了其结构。     

Vapor pressure of R227ea + ethanol at 343.13 K by molecular simulation

A new molecular model for 1,1,1,2,3,3,3-heptafluoropropane (R227ea) was developed on the basis of quantum chemical calculations and optimized using experimental vapor pressure and bubble density data. In combination with an existing model for ethanol, a molecular model for the binary mixture R227ea + ethanol was defined, using the Lorentz–Berthelot combining rule. It was validated at 283.17 K, where, considering the statistical uncertainties, it agrees to the experimental vapor pressure. The vapor–liquid equilibrium, comprising both bubble line and dew line data, was predicted at 343.13 K by molecular simulation. The Peng–Robinson equation of state fails for this system.     

Carbonyl allylation of aldehydes catalyzed by a silica-supported poly-γ-diphenylarsinopropylsiloxane palladium(0) complex

A silica-supported poly-γ-diphenylarsinopropylsiloxane palladium(0) complex has been prepared from γ-chloropropyltriethoxysilane via immobilization on fumed silica, followed by reacting with potassium diphenylarsenide and palladium chloride, and then the reduction with hydrazine hydrate. The palladium(0) complex has been found to catalyze the allylation of aldehydes via the formation of π-allylpalladium complexes, using allylic chlorides as allylating agent and SnCl₂ as reducing agent. This polymeric palladium complex can be recovered and reused.     

ZnCl2熔盐的分子动力学模拟

近年来，若干作者根据几种粒子间函数，对ZnCl2熔盐结构做过分子动力学模拟［1－3］其出的Zn－Cl和Cl－Cl离子间的偏径向分布函数与中子衍射实测值符合较好，但Zn－Zn离子间距以及Zn－Zn间配位数计算值多偏高．鉴于Busing势函数在多价卤化物馆盐的分子动力学计算中应用效果较好[4],我们试用Busing势函数为基础对ZnCl2熔盐结构和能量做分子动力学计算．1研究方法计算所用粒子势为Busing势函数此处，Zi为离子的电行数（ZZn。＋＝2，Zcl－＝1），几；是离子有效半径，人为＊离子的“硬度”参数·据文献问，f二0．005071，尸zn。十二0．…     

川芎嗪的结构修饰及生物活性

介绍了川芎嗪的结构修饰及其衍生物的生物活性、川芎嗪衍生物合成及其在新药开发方面的发展前景。     

Potentiometric determination of iron using a fluoride ion-selective electrode-the application of the Apple II-ISE intelligent ion analyzer

A new method for determining iron is based on both nonlinear regression calibration plots and parabolic interpolation using a fluoride ion-selective electrode (ISE) and the Apple II-ISE intelligent ion Analyzer developed by ourselves. The experimental conditions for determining iron are discussed. The appropriate acidity of the experimental solution is pH 3, controlled by total ionic strength adjustment buffer (TISAB) that is composed of glycine (aminoacetic acid), nitric acid and sodium nitrate. The suitable total concentration of fluoride is equal to the highest concentration of iron in the standard series. Because the mathematical model of the method coincides with the experimental data the Apple II-ISE intelligent ion Analyzer can perform data acquisition and data processing, and the performance of fluoride electrode is excellent, the new method for determination of iron is fast and accurate. This method has been used successfully in the determination of iron in mineral samples.     

Synthesis and Structural Characterization of cis- and trans-bis(4,4′-dimethyl-2,2′-bipyridine)cadmium(II) Nitrates Prepared in a One-pot Reaction

The cis and trans isomers of [Cd(dmbpy)₂](NO₃)₂] (dmbpy = 4,4′-dimethyl-2,2′-bipyridine) have been synthesized simultaneously via a one-pot reaction of Cd(NO₃)₂ · 4H₂O with the dmbpy ligand in a MeOH/H₂O mixture; they can be obtained individually by means of the mechanical separation due to their different growing habit of the single-crystals. Different π-stacking interactions are observed in the cis and trans isomers forming different one-dimensional networks. The outcome of the DFT calculations agrees well with the experimental results.