基于交叉共轭结构的功能材料

近年来,人们对交叉共轭体系的制备、性能以及理论研究方面产生了极大的兴趣。本文综述了近期国内外在交叉共轭体系研究方面取得的一些最新进展,重点介绍了其在自组装、有机电致发光和离子检测等方面的最新发展动态。最后还对本课题组在交叉型p-n双嵌段寡聚物方面的研究作了详细的介绍,并对一些热点问题作了展望。     

Extraction of Americium(III) and Europium(III) with Two Open-Chain Crown Ethers of Amide Type

The extraction of Am³⁺ and Eu³⁺ from aqueous picric acid solution by N, N-dinaphthyl-N, N-diphenyl-3,6-dioxaoctanediamide (L^I) and 1, 1-(3, 6, 9-trioxaundecanedionyl)diphenothiazine (L^II) was investigated by a radioactive tracer technique. Extraction distribution ratios of Am³⁺ and Eu³⁺ have been measured as a function of pH, picric acid concentration, extractant concentration, diluent and temperature. The extraction of Am³⁺ is preferred to that of Eu³⁺ for both L^I and L^II, and the latter gives larger separation factor than the former. The equilibrium constants and thermodynamic parameters of extraction reactions were also calculated.     

十二烷基硫酸钠对甲烷水合物生成过程影响研究

根据甲烷水合物含气率高、分解速度慢等特性,提出利用高压注水技术和表面活性剂促进作用促使矿井瓦斯水合化以预防煤与瓦斯突出的思路。进行了3·6~12℃、7·82~12·26MPa条件下两种浓度体系(10mmol/L和0·3mmol/L)中十二烷基硫酸钠(SDS)对甲烷水合物作用效果的实验研究,结合水合物诱导时间、生成速度及含气率等计算对实验数据进行了分析,并运用表面张力法测得8℃时SDS溶液的临界胶束浓度(CMC)为2·5mmol/L。结果表明,高浓度体系对水合物生成速度、含气率的影响较之低浓度体系的更强,但是低浓度体系中水合物生成的诱导时间却较短,表面活性剂溶液浓度超过其CMC后对水合物的生成影响显著。     

微乳液介质—1—（2—吡啶偶氮）—2—萘酚光度法测定汽油中环烷酸铁的含量

本研究了微乳液为介质时，铁与１－（２－吡啶偶氮）－２－萘酚（ＰＡＮ）的显色反应。选择７３０ｎｍ处为测定波长，ε为１．４×１０＾４Ｌ．ｍｏｌ＾－＾１．ｃｍ＾－＾１，铁量在０－５０μｇ／２５ｍｌ范围内符合比耳定律，该法适用于汽油中环烷酸铁的测定。     

铜(Ⅱ)--二肽配合物的配位形式、结构和稳定性研究进展

本文概述了近几十年来铜(Ⅱ)—二肽配合物的研究进展,介绍了铜(Ⅱ)—二肽体系几种常见的配位方式,以及溶液和晶体中的二肽铜配合物的结构。对配合物的稳定性进行了讨论,着重介绍了二肽的光学异构对配合物稳定性的影响。     

One-pot synthesis of N-protected α-amino aldehyde acetals from three-component reaction of fluoroalkanesulfonyl azide, vinyl ether and alcohol

A facile one-step method has been developed for the synthesis of N-protected α-amino aldehyde acetals in moderate to good yields by three-component reaction of fluoroalkanesulfonyl azides, vinyl ethers and alcohol at 0 °C within 10 min. This practical synthetic method provides a convenient and expeditious access to N-per(poly)fluoroalkanesulfonyl α-amino aldehyde acetals.     

繁峙煤镜质组的生烃特征与热解产物生成动力学研究

本文利用付立叶红外光谱（ＦＴＩＲ），热解气相色谱（Ｐｙ－ＧＣ）及热解气相色谱质谱（Ｐｙ－ＧＣ－ＭＳ）联用技术等分析手段，探讨了我国山西繁峙煤镜质组的生烃特征，鉴定了如气体烃、正构脂肪烃、苯酚、单环芳烃以及甲氧基酚类等热解产物６７种化合物。用相继等温热解法一级反应动力学模型，求取了热解产物如气体组分（Ｃ１￣Ｃ６）、轻烃（Ｃ７￣Ｃ１４）、重烃（Ｃ１５￣Ｃ３０）、正构脂肪烃（ｎＣｉ）、烷基芳烃、苯酚等的     

X射线衍射仪新功能的开发及其应用

根据Ｘ射线衍射仪的结构特点,通过巧妙而简易的改装,增添了“同步照相”新功能。文中分析了开发新功能的可行性;列举了新功能在某些场合下,能使传统的照相法和现代的衍射仪法结合起来,取长补短的例子;指出新功能有助于提高分析测试水平,并可收到一机多用、节能高效的综合效果。     

Synthesis of gramicidin S and its analogues via an on-resin macrolactamization assisted by a predisposed conformation of the linear precursors

A simple and efficient preparation of gramicidin S and its analogues is described. It involves solid-phase peptide synthesis and on-resin macrolactamization without side chain protection, affording cyclic products in high yield and high purity. The high specificity of the cyclization reaction was shown to originate in the formation of a pre-organized conformation of the linear biosynthetic precursor of gramicidin S. This facile method will provide convenient access to the analogues of the natural product for functional optimization to counter microbial resistance.     

Method development for the quantitation of ABT-578 in rabbit artery tissue by 96-well liquid-liquid extraction and liquid chromatography/tandem mass spectrometric detection

Quantitative determination of drug concentrations in tissue samples can provide critical information for drug metabolism, kinetics, and toxicity evaluations. For analysis of tissue samples using liquid chromatography/tandem mass spectrometric (LC/MS/MS) detection, homogenization is a critical step in achieving good assay performance. Assay performance can be closely evaluated by spiking the drug directly into tissue samples prior to homogenization. It is especially important to include this assay evaluation for the analysis of artery tissue samples because artery tissue is very elastic, making it quite a challenge to develop an effective procedure for homogenization. An LC/MS/MS assay in 96-well format using liquid-liquid extraction was developed for analyzing ABT-578 in rabbit artery samples. Tissue quality control samples were prepared by spiking ABT-578 stock solutions directly into the tissue before homogenization. The usage of the tissue control samples gives a thorough evaluation of the sample preparation process that includes both homogenization and sample extraction. A 20% blood in saline solution was used as a homogenization solution. Calibration standards were made by spiking ABT-578 into rabbit whole blood. Blood quality control samples were also prepared by spiking ABT-578 into rabbit whole blood. These blood QC samples were used to confirm the validity of the calibration curve. A lower limit of quantitation of 0.050 ng/mL was achieved. The linear dynamic range of blood standards was from 0.050-30.3 ng/mL with the correlation coefficient (r) ranging from 0.9969-0.9996. Overall %CV was between 1.3 and 7.0%, and analytical recovery was between 98.2 and 105.8% for blood QC samples. The %CVs for tissue QC samples were between 6.7 and 13.0%, and analytical recovery after correction was between 93.5 and 114.3%.