Broadband spectral shaping in a Ti:sapphire regenerative amplifier

A birefringent crystal quartz plate of known thickness has been used as a spectral filter for spectral shaping in a Ti:sapphire regenerative amplifier. The spectral profile of the amplified pulse ejected from the regenerative amplifier was observed while adjusting the birefringent crystal plate in the cavity. By altering the gain spectrum, the bandwidth of the regeneratively amplified pulse was increased from 18 to 35 nm by using a 0.34-mm thick birefringent plate. The output pulse spectrum from the regenerative amplifier neared the bandwidth of the seed pulse. As a comparison, we used a coated filter outside the regenerative amplifier cavity, and the bandwidth of the regeneratively amplified pulse was stretched to 28 nm. When the bandwidth was stretched to 35 nm, the pulse was compressed to 35 fs.     

A Comparative Study on Dynamic and Static Sparsity Patterns in Parallel Sparse Approximate Inverse Preconditioning

Sparse approximate inverse (SAI) techniques have recently emerged as a new class of parallel preconditioning techniques for solving large sparse linear systems on high performance computers. The choice of the sparsity pattern of the SAI matrix is probably the most important step in constructing an SAI preconditioner. Both dynamic and static sparsity pattern selection approaches have been proposed by researchers. Through a few numerical experiments, we conduct a comparable study on the properties and performance of the SAI preconditioners using the different sparsity patterns for solving some sparse linear systems. This revised version was published online in July 2006 with corrections to the Cover Date.     

气相色谱仪的技术指标测算方法

通过对气相色谱各项技术指标及意义的介绍，使应用者娴熟地掌握气相色谱的各项技术指标和测算方法，正确的表达分析检测结果。     

Lipschitz estimates for generalized commutators of fractional integrals with rough kernel

Let (0 < α < n) be the generalized commutator generated by fractional integral with rough kernel and the m–th order remainder of the Taylor formula of a function A. In this paper, the (L^p, L^r) (r > 1) boundedness, the weak (L¹, L^{n/(n–α–β)}) boundedness and the (L^p, ?^{β, ∞}_p) boundedness of are discussed, when D^γA belongs to the Lipschitz function spaces.     

基于cDNA宏阵列的系统聚类分析猪发育阶段的基因表达谱

取杜洛克猪胚胎第33,45,55，65．75天的背最长肌样本．用cDNA Macroarray分析方法和聚类分析技术分析了327个EST在骨骼肌内不同发育阶段的基因表达谱．结果表明有98条EST在不同发育时期显著差异表达．第33天和第45天两阶段基因表达状态相似．第55天和第65天基因表达状态相似．而第75天的基因表达与第55天和第65天两个阶段的基因表达具有相近的聚类关系．表达状态相近，基因功能相似的基因大都被聚类在一起．     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

光电光谱法分析钢中钙

本文研究了用光电光谱法测定钢中钙的方法 ,确定了最佳分析条件 ,分析了共存元素的干扰情况。用本方法测定钢中钙 ,具有良好的准确度和精密度 ,结果令人满意。     

On the evaluation of the nonisothermal kinetic parameters of (GeS2)0.3(Sb2S3)0.7 crystallization using the IKP method

The isoconversional method suggested by Friedman and the invariant kinetic parameters method (IKP) were used in order to examine the kinetics of the nonisothermal crystallization of (GeS₂)_0.3(Sb₂S₃)_0.7. The objective of the paper is to show the usefulness of the IKP method both for determining the activation parameters as well as the model of the investigated process. It was shown that the kinetic triplet [(E, A, f(α), where E is the activation energy, A is the preexponential factor, and f(α) is the differential function of conversion], which results through the application of the IKP method, depends on the set of kinetic models considered. For different sets of kinetic models, proportional values of f(α) are obtained. A criterion for the selection of this set, the use of which lead to the true kinetic triplet corresponding to the analyzed process (E = 163.2 kJ mol^?1; A = 2.47 × 10¹² min^?1 and the Avrami‐Erofeev model, A_m, for m = 2.5–2.6 was suggested. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 309–315, 2004     

Horizontal lift of Ornstein-Uhlenbeck process over Riemannian path space

In this paper we give a representation formula for the heat semigroup on adapted vector fields by the horizontal lift of Ornstein-Uhlenbeck process over Riemannian path space.     

One‐step synthesis of aminopyrimidines from 5‐Oxo‐4H‐benzopyrans

Novel 4‐amino‐6‐aryl‐2‐phenylpyrimidine‐5‐carbonitriles have been prepared in one step procedure from the readily available 4‐aryl‐2‐amino‐3‐cyano‐5,6,7,8‐tetrahydro‐7,7‐dimethyl‐5‐oxo‐4H‐benzopyrans. The mass spectroscopy study under EI conditions shows molecular peaks with high intensity corresponding to the loss of benzonitrile from the C2 position of the pyrimidine ring. Semiempirical (AMI and PM3) and ab initio HF/6–31G* calculations reveal a favored distorted geometry where the three rings are not in the same plane.