金负载量对低温水煤气变换Au/α-Fe2O3催化剂结构和性能的影响

采用共沉淀法制备了低温水煤气变换Au/α-Fe2O3催化剂。通过正交实验优化催化剂的还原活化条件，考察了金负载量对催化剂性能的影响。采用BET、XRD、UV-VIS、XRF、H2-TPR和O2-TPO等表征手段对催化剂的结构进行分析，并与其催化性能进行关联。结果表明，（1）采用10%-H2/N2还原气将催化剂在150 ℃原位还原9 h，其催化活性最高；（2）金的最佳负载量为8.00%，此时在催化剂制备过程中金的流失量较少，金粒子较小，也有利于抑制催化剂在反应过程中烧结；（3）TPR-TPO结果表明，金的负载量为8.00%时，Au/α-Fe2O3催化剂具有较易被还原、不易被氧化的性质，从而显示出最高催化活性。（4）Au/α-Fe2O3催化剂中的金以单质金（Au0）形式存在；其高活性与Au0-Fe3O4间的协同作用有关。     

Pt/Au双金属纳米粒子的制备及表征

Poly (N-vinyl-2-pyrrolidone)-protected Pt/Au bimetallic nanoparticles were obtained by reducing the mixture of HAuCl4 and H2PtCl6 with sodium borohydride. UV-vis spectra, transmission electronic microscopy and X-my diffraction reveal that the prepared bimetallic nanoparticles are of alloy structure.     

冻干保护剂溶液低温退火特性的研究

利用差示扫描量热仪(DSC)研究了10%叔丁醇/10%蔗糖/水溶液的冻结特性, 退火温度及退火时间, 分析了溶液的退火行为. 实验结果表明, 溶液降温时, 蔗糖的存在阻碍了叔丁醇析出, 最大冻结浓缩溶液玻璃化转变温度Tg′由－32.5 ℃降低到－42.0 ℃, 升温时在－30 ℃叔丁醇发生反玻璃化. 在反玻璃化峰附近的温度进行退火可使叔丁醇充分析出, Tg′由－42.0 ℃上升到－34.9 ℃. 所需的退火时间与退火温度有关, 退火温度越接近Tg′, 所需的退火时间越长. 在－37 ℃时, 退火20 min可完全消除反玻璃化.     

不同条件对硫酸钙结晶影响的实验研究

近年来由于微波化学的快速发展使人们认识到微波作为一种手段对化学反应的过程有着深刻的影响，在材料领域更是得到了日益广泛的应用，因此把微波应用于结晶过程也成为人们关注的热点。早在1966年磁场就被应用于晶体的生长。近年来，已有很多文献报道电场、磁场对晶体生长的影响。     

Re(CO)5Br-catalyzed addition of carboxylic acids to terminal alkynes: a high anti-Markovnikov and recoverable homogeneous catalyst

The addition of carboxylic acids to terminal alkynes is efficiently catalyzed by the early transition-metal complex Re(CO)5Br in toluene or n-heptane at 110 degrees C in an air atmosphere, affording the anti-Markovnikov adducts in good yields with high selectivity. In most cases, the reactions afford unusual Z-adduct predominantly. When n-heptane was used as solvent, Re(CO)5Br can be partly recovered from the reaction mixture.     

Highly Efficient Esterification of an Equimolar Amount of Carboxylic Acids and Alcohols Catalyzed by ZrOCl_2·8H_2O

Esterification of carboxylic acids with alcohols is one of the most fundamental and useful transformations in organic synthesis. The most common catalysts are H2SO4 and TsOH. However, H2SO4 or TsOH-catalyzed esterification procedure has some problems such as corrosion, side reactions, difficulty in separation. Hence, recently, various solid acid catalysts such as ion-exchanged resins, molecular sieve, and heteropoly acids etc. have been employed for esterification reaction. However, the s…     

微波辐射下无催化剂一锅法合成N-甲基十氢吖啶-1,8-二酮化合物

为了研究从简单易得的原料在无催化剂的条件下一锅法合成N-甲基十氢吖啶-1,8-二酮化合物，我们以各类醛（脂肪醛、芳香醛、二醛）、达咪酮或1,3-环己二酮和甲胺为原料，以乙二醇或水为溶剂，经微波辐射，一步反应得到了一系列N-甲基十氢吖啶-1,8-二酮化合物。反应时间从传统热反应的4-5小时缩短至2-10分钟，产率较高（56-95%），并且不需要使用催化剂。该反应后处理方便，只需要简单洗涤，环境友好，为合成此类化合物提供了一种简便、有效的合成方法。该方法不仅适用于一元脂肪醛、芳香醛，还适用于芳香二醛，因此可以合成含有一个或两个十氢吖啶结构单元的杂环化合物。     

微波辐射下三组分“一锅法”合成5-芳基-1,5,6,7,8,9-六氢化-2H-吡唑[5,4-b]并喹啉-6-酮

在微波辐射下以芳醛、1,3-环己二酮或达米酮和氨基吡唑为原料, 用乙二醇作能量转移剂, 三组分“一锅法”快速合成了一系列吡唑[5,4-b]并喹啉类化合物. 该方法速度快(30～90 s), 产率高(88%～98%), 环境友好. 产物结构通过红外光谱、核磁共振谱和元素分析证实, 化合物4e的单晶经X射线衍射分析, 进一步确证了产物结构.     

Benzylation of Aromatic Compounds with Benzyl Chloride Catalyzed by Nafion/SiO_2 Nanocomposite Catalyst

Diphenylmethane and substituted diphenylmethane are important compounds forsynthesis chemistry as well as industrial chemistry. These compounds are easilysynthesized by the benzylation of aromatic compounds with benzyl chloride or benzylalcohol catalyzed by homogeneous acid catalysts, such as AlCl3, FeCl3, H2SO4, HF andBF3. However, these catalytic systems are highly corrosive, and usually proceed withlow selectivity. In addition, they are less satisfactory from the environmen…     

N,N′-双吡咯的合成及其邻位基团效应

2,2-联吡咯是某些天然存在的活性吡咯化合物中关键组成,关于手性联吡咯的研究己有详细的综述报道。近年发现,某些含N-取代氨基的空间阻碍吡咯有明显的生理活性和可贵的药理性质。N,N′-联吡咯中N-N键,很容易发生均裂反应而生成游离基,后