Hyperbranched ferrocenyl polymer film with high charge transport efficiency

The electrochemical behaviors of hyperbranched poly(ferrocenyl-methylsilane) (HPFMS) and linear oligo(ferrocenyldimethylsilane) (LOFS) films were studied systematically by cyclic voltammetry and chronocoulometry under different polymer coverage and solvents. Both poly(ferrocenylsilanes) show stable cyclic voltammographs in LiClO 4 solutions. Compared with LOFS films, HPFMS films exhibit higher charge transport efficiency because of their hyperbranched structure: peak current ( i p) and apparent diffusion coefficient ( D app) for HPFMS films are larger than those for LOFS films, especially at high polymer coverage (3.8 x 10 (-11) vs 3.9 x 10 (-12) cm (2)/s for HPFMS and LOFS film at the coverage of 2.1 x 10 (-6) mol Fc/cm (2)). The conceptual models of electrode processes for HPFMS and LOFS films were proposed to account for higher charge transport efficiency of HPFMS films. It is also found that a solvent with the appropriate solubility parameter and polarity, lower viscosity, and higher dielectric constant is in favor of charge transport through polymer films, which is consistent with the proposed model of electrode process for HPFMS films. These results imply that hyperbranched ferrocenyl polymers have the potential to be excellent chemical sensor materials with convenient synthesis and high sensitivity.     

Novel IMB16-4 Compound Loaded into Silica Nanoparticles Exhibits Enhanced Oral Bioavailability and Increased Anti-Liver Fibrosis In Vitro

Background: Liver fibrosis, as a common and refractory disease, is challenging to treat due to the lack of effective agents worldwide. Recently, we have developed a novel compound, N-(3,4,5-trichlorophenyl)-2(3-nitrobenzenesulfonamide) benzamide (IMB16-4), which is expected to have good potential effects against liver fibrosis. However, IMB16-4 is water-insoluble and has very low bioavailability. Methods: Mesoporous silica nanoparticles (MSNs) were selected as drug carriers for the purpose of increasing the dissolution of IMB16-4, as well as improving its oral bioavailability and inhibiting liver fibrosis. The physical states of IMB16-4 and IMB16-4-MSNs were investigated using nitrogen adsorption, thermogravimetric analysis (TGA), HPLC, UV-Vis, X-ray diffraction (XRD) and differential scanning calorimetry (DSC). Results: The results show that MSNs enhanced the dissolution rate of IMB16-4 significantly. IMB16-4-MSNs reduced cytotoxicity at high concentrations of IMB16-4 on human hepatic stellate cells LX-2 cells and improved oral bioavailability up to 530% compared with raw IMB16-4 on Sprague–Dawley (SD) rats. In addition, IMB16-4-MSNs repressed hepatic fibrogenesis by decreasing the expression of hepatic fibrogenic markers, including α-smooth muscle actin (α-SMA), transforming growth factor-beta (TGF-β1) and matrix metalloproteinase-2 (MMP2) in LX-2 cells. Conclusions: These results provided powerful information on the use of IMB16-4-MSNs for the treatment of liver fibrosis in the future.     

Cyclic oxonitriles: stereodivergent grignard addition-alkylations

Sequential carbonyl addition-conjugate addition of Grignard reagents to cyclic 5-7-membered oxoalkenenitriles efficiently generates cyclic magnesiated nitriles. Alkylations of these magnesiated nitriles exhibit diastereoselectivities that depend intimately on the size of the carbocyclic ring: 5-membered oxonitriles generate magnesiated nitriles whose alkylations are controlled by steric constraints whereas 6- and 7-membered oxonitriles generate internally coordinated, C-magnesiated nitriles whose alkylations are controlled by stereoelectronic effects. Reversing the alkylation selectivity of 6-membered C-magnesiated nitriles is achieved by conversion to an N-metalated nitrile in which steric, rather than electronic, effects direct the electrophile trajectory. Collectively, the conjugate addition-alkylation generates highly substituted, cyclic 5-7-membered nitriles containing three new stereocenters with selective access to diastereomers at the quaternary nitrile-bearing carbon.     

Characterization of volatile components in dry chrysanthemum flowers using headspace-liquid-phase microextraction-gas chromatography

A headspace-liquid-phase microextraction (HS-LPME)-GC (gas chromatography) method for the characterization of volatile components in dry chrysanthemum flowers has been developed. In the proposed method, two extraction solvents, n-hexadecane and benzyl alcohol, are used for preconcentrating volatiles in the sample. A droplet of the extraction solvent is squeezed from the GC syringe and inserted in the headspace of the sample bottle with the dry flower, immersed in deionized water, and warmed in a water bath. The optimum HS-LPME parameters in terms of extraction solvent type, droplet magnitude, equilibrium (water bath) temperature, equilibrium time, extraction time, and ionic strength are achieved using GC-FID (flame ionization detection) by varying several levels of the factors that affect the HS-LPME procedure. After extraction under the optimized conditions, the extraction droplet is retracted into the syringe and injected for GC-MS (mass spectrometry) analysis. Thirty-three volatile components are extracted and identified using this HS-LPME-GC-MS method, with the aid of chemometric methods. It is shown that the volatiles in dry chrysanthemum flowers are mainly unsaturated organic compounds, such as monoterpenes, sesquiterpenes and their oxygenous derivatives, triterpenoids, and aliphatic compounds. Several representative components, in order of precedence of the retention time, are pinene (106.3 microg/g), camphene (112.7 microg/g), eucapyptol (52.1 microg/g), camphor (29.4 microg/g), borneol (4.2 microg g), bornyl acetate (67.3 microg/g), caryophyllene (0.7 microg/g), and caryophyllene oxide (20.0 microg/g). The relative standard error and detection limit of this method is 5~9% and 0.4 microg/g, respectively.     

Preparation of glucagon-like peptide-1 loaded PLGA microspheres: characterizations, release studies and bioactivities in vitro/in vivo

The gut hormone glucagon-like peptide-1 (GLP-1) is proposed for treatment of Type II diabetes mellitus. However, the short half life of GLP-1 in vivo is a major limitation for its application due to the frequent invasive administrations. To provide a optimal formulation to overcome this limitation, we developed a GLP-1 entrapped microspheres to achieve sustained release GLP-1 for 4-week. GLP-1 was stabilized by GLP-1-zinc complexation with zinc carbonate and encapsulated in poly(D,L-lactic-co-glycolic acid) (PLGA) with S/O/O solvent extraction to obtain GLP-1 loaded PLGA microspheres (MS). The characteristics of MS were evaluated as follows: The surface morphology was assessed by scanning electron microscopy (SEM); The drug encapsulation efficiency and GLP-1 controlled release profile was tested by HPLC; The sustained release of GLP-1 MS in vivo and pharmacological efficacy were studied in normal mice and streptozotocin (STZ)-induced diabetic mice model after subcutaneous administration of GLP-1 MS. GLP-1-zinc complexation significantly reduced initial burst release from 37.2 to 7.5%. The controlled release bioactive GLP-1 in vitro was achieved for 4-week period by zinc complexation and addition of ZnCO(3). The optimal and complete cumulative release of GLP-1 from MS was increased from 23 to 63% in 28 d by using low MW PLGA (MW 14000). The in vivo testing in normal mice and diabetic mice suggest that this zinc-stabilized technique combined with S/O/O method in the presence of water insoluble antacid additive ZnCO(3) preserve the biological activity of GLP-1. GLP-1 MS formulation achieved controlled released in vivo for 28 d and exhibit sustained long term pharmacological efficacy to decrease blood glucose level in diabetic mice. This GLP-1 MS formulation provides a practical formulation for long-term sustained delivery of GLP-1 to treat Type II diabetes.     

Independent component analysis and its applications in signal processing for analytical chemistry

Independent component analysis (ICA) is a statistical method the goal of which is to find a linear representation of non-Gaussian data so that the components are statistically independent, or as independent as possible. In an ICA procedure, the estimated independent components (ICs) are identical to or highly correlated to the spectral profiles of the chemical components in mixtures under certain circumstances, so the latent variables obtained are chemically interpretable and useful for qualitative analysis of mixtures without prior information about the sources or reference materials, and the calculated demixing matrix is useful for simultaneous determination of polycomponents in mixtures. We review commonly used ICA algorithms and recent ICA applications in signal processing for qualitative and quantitative analysis. Furthermore, we also review the preprocessing method for ICA applications and the robustness of different ICA algorithms, and we give the empirical criterion for selection of ICA algorithms in signal processing for analytical chemistry.     

高分子表面活性剂P(AM-co-OPMA)的合成与表征

辛基酚聚氧乙烯醚(10)(OP-10)与马来酸酐在95℃下反应,合成了辛基酚聚氧乙烯醚马来酸单酯(OPMA);并在水溶液中与丙烯酰胺(AM)单体进行共聚合,获得了高分子表面活性剂P(AM-co-OPMA);考察了引发剂用量、单体组成、单体总浓度及反应温度对共聚物特性粘数与阴离子度的影响.通过红外光谱、紫外光谱、荧光发射光谱和电导滴定对共聚物结构和组成进行了表征;利用视频光学接触角测量仪分别测定了共聚物表面和界面张力.结果表明,在聚丙烯酰胺分子主链上引入OPMA链节后,不仅保持了PAM优良的增稠能力(特性粘数达764.31 mL/g),且赋予了共聚物较高的表面活性(浓度为1.5 g/L共聚物水溶液的表面和界面张力分别可达53.94 mN/m和5.41 mN/m).     

介孔ZnO/SiO2复合材料的合成与性能表征

通过原位合成的方法,以[Zn(OH)x]-(x-2)(x＞2)为锌源、正硅酸乙酯(TEOS)为硅源,合成了孔壁为ZnO/SiO2复合结构的MCM-48型有序介孔分子筛,并通过XRD、XPS、N2吸附-脱附等温线等手段对样品进行了表征,结果表明,锌以正二价离子的形式均匀的分布在MCM-48分子筛的孔壁结构中.另外,适量掺锌所合成的Zn-MCM-48介孔材料仍然保持立方介孔的有序结构,具有较高的比表面积、较高的孔容和较宽的孔径分布.     

An Endogenous Prompting Mechanism for Sulfur Conversions Via Coupling with Polysulfides in Li−S Batteries

The sluggish kinetics process and shuttling of soluble intermediates present in complex conversion between sulfur and lithium sulfide severely limit the practical application of lithium-sulfur batteries. Herein, by introducing a designated functional organic molecule to couple with polysulfide intermediators, an endogenous prompting mechanism of sulfur conversions has thus been created leading to an alternative sulfur-electrode process, in another words, to build a fast “internal cycle” of promotors that can promote the slow “external cycle” of sulfur conversions. The coupling-intermediators between the functional organic molecule and polysulfides, organophosphorus polysulfides, to be the “promotors” for sulfur conversions, are not only insoluble in the electrolyte but also with higher redox-activity. So the sulfur-electrode process kinetics is greatly improved and the shuttle effect is eliminated simultaneously by this strategy. Meanwhile, with the endogenous prompting mechanism, the morphology of the final discharge product can be modified into a uniform covering film, which is more conducive to its decomposition when charging. Benefiting from the effective mediation of reaction kinetics and control of intermediates solubility, the lithium-sulfur batteries can act out excellent rate performance and cycling stability.     

基于ARIMA模型对海南省社会消费品零售总额的预测

对海南省社会消费品零售总额进行预测,对于了解海南省社会消费品零售总额的发展态势,为有关部门作出决策提供科学的依据,具有重大的现实经济意义.选取1999年到2014年的海南省社会消费品零售总额的数据来建立ARIMA(1,3,2)模型,2012年到2014年的实际值与预测值的相对误差5%以内,拟合效果良好,说明采用ARIMA模型预测海南省社会消费品零售总额是可行的,预测数据可靠.最后对海南省2015-2018年的社会消费品零售总额进行预测.