Synthesis, Characterization and Thermal Decomposition Mechanism of Cetyltrimethyl Ammonium Tetrathiotungstate

The synthesis, characterization and thermal decomposition mechanism of cetyltrimethyl ammonium tetrathiotungstate （CTriMATT） were studied herein. The as-synthesized CTriMATT was characterized by Elemental analysis, X-ray diffraction （XRD）, Fourier transform infrared （FT-IR）, Ultraviolet visible （UV-Vis） spectra. The results showed that the as-synthesized CTriMATT had high purity and good crystallinity. The introduction of alkyl groups induced a shift of the stretching vibration band of W-S bond to lower wavenumber, while it had no influence on the position of WS4^2-. Thermogravimetric analysis （TG）, differential thermal analysis （DTA） and in situ XRD characterizations revealed that CTriMATT began to decompose at 423 K in nitrogen and was converted to WS2 eventually. In addition, the decomposition product of CTriMATT at 673 K in nitrogen was characterized by N2 adsorption （BET） and scanning electron microscopy （SEM）. The results demonstrated that WS2 with higher specific surface area, and pore volume could be obtained from the thermal decomposition of CTriMATT in nitrogen.     

Thermionic emission from giant fullerenes

The kinetics of cluster formation in supersonic jets is examined by numerical integration of the master equation system. Some general characteristics of cluster kinetics could be formulated. Excellent agreement between experimental curves of p-cresol (H₂O)_{0, 1, 2, 3} formation as function of H₂O pressure and the corresponding calculated curves were obtained assuming successive cluster formation. From the kinetic curves, an unambiguous assignment of cluster size was possible which agreed with mass-resolved REMPI measurements. The fit of the rate coefficients shows the formation of p-cresol (H₂O)₁ to be faster than p-cresol (H₂O)₂ and p-cresol (H₂O)₃.     

Quality evaluation of Flos lonicerae through a simultaneous determination of seven saponins by HPLC with ELSD

A new HPLC coupled with evaporative light scattering detection (ELSD) method has been developed for the simultaneous quantitative determination of seven major saponins, namely macranthoidin B (1), macranthoidin A (2), dipsacoside B (3), hederagenin-28-O-beta-D-glucopyranosyl(6-->1)-O-beta-D-glucopyranosyl ester (4), macranthoside B (5), macranthoside A (6), and hederagenin-3-O-alpha-L-arabinopyranosyl(2-->1)-O-alpha-L-rhamnopyranoside (7) in Flos Lonicerae, a commonly used traditional Chinese medicine (TCM) herb. Simultaneous separation of these seven saponins was achieved on a C18 analytical column. The mobile phase consisted of (A) acetonitrile-acetic acid (95:0.5) and (B) 0.5% aqueous acetic acid using a gradient elution of 29%A at 0-10 min, 29-46%A at 10-25 min and 46%A at 25-30 min. The drift tube temperature of ELSD was set at 106 degrees C, and with the nitrogen flow-rate of 2.6 l/min. All calibration curves showed good linear regression (r2>0.9922) within test ranges. This method showed good reproducibility for the quantification of these seven saponins in Flos Lonicerae with intra- and inter-day variations of less than 3.0% and 6.0%, respectively. The validated method was successfully applied to quantify seven saponins in five sources of Flos Lonicerae, which provides a new basis of overall assessment on quality of Flos Lonicerae.     

Fast atom bombardment induced ring rupture of silatranes

During a comparison study of the fast atom bombardment (FAB) and electron impact mass spectra of 1-organyl-2,9,10-trioxa-6-aza-1-silatricyclo[4.3.3.0^1,6]dodecanes, an unusual ion peak at m/z 164 was noticed in the FAB spectra. Accurate mass measurement indicated that m/z 164 corresponds to protonated 1-[N,N-bis(2-hydroxyethyl)amino]-1-propanol (BHAP), which is produced by a ring-rupture reaction. Further experiment showed that the intensity of the [BHAP + H]⁺ ion peak increased markedly as the 7keV Ar⁰ bombardment proceeded, suggesting a FAB-induced reaction. The possible mechanism is also discussed.     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

无脂链磺化酞菁铜多层膜体系：电子非弹性平均自由程的研究

磺化酞菁铜多层膜体系是利用Langmuir-Blodgett技术制备的有序有机分子膜,它对于XPS测试有很好的稳定性,本文在固定电子出射角的条件下利用XPS方法研究了不同厚度的膜样品中Cu_((2(?))_(3/2))、Ni_(1(?))、S_(2p)峰强度的变化规律,讨论了膜内分子有序排列引起的散射效应对电子平均自由程的影响。     

Electrochemical characteristics of a platinum electrode modified with a matrix of polyvinyl butyral and colloidal Ag containing immobilized horseradish peroxidase

A new hydrogen peroxide biosensor was constructed, which consisted of a platinum electrode modified by a matrix of polyvinyl butyral (PVB) and nanometer-sized Ag colloid containing immobilized horseradish peroxidase (HRP), and using Co(bpy)₃³⁺ as mediator in the hydrogen peroxide solution. The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The modified process was characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The HRP immobilized on colloidal Ag was stable and retained its biological activity. The sensor displays excellent electrocatalytic response to the reduction of H₂O₂. Analytical parameters such as pH and temperature were also studied. Linear calibration for H₂O₂ was obtained in the range of 1×10^–5 to 1×10^–2 M under optimized conditions. The sensor was highly sensitive to H₂O₂, with a detection limit of 2×10^–6 M, and the sensor achieved 95% of steady-state current within 10 s. The sensor exhibited high sensitivity, selectivity and stability.     

Direct electrochemistry and enzymatic activity of hemoglobin in positively charged colloid Au nanoparticles and hemoglobin layer-by-layer self-assembly films

Alternate adsorption of positively charged colloid-Au nanoparticles (nano-Au⊕) and negatively charged hemoglobin (Hb) on L-cysteine (L-cys) modified gold electrode resulted in the assembly of {Hb/nano-Au⊕}n layer-by-layer films/L-cys modified gold electrode. The nano-Au⊕ was characterized by transmission electron micrograph (TEM) and microelectrophoresis. The modified electrode interface morphology was characterized by electrochemical impedance spectroscopy (EIS), atomic force mi- croscopy (AFM), cyclic voltammograms (CV) and chronoamperometry. Direct electron transfer between hemoglobin and gold electrodes was studied, and the apparent Michaelis-Menten constant ( km app) of the modified electrode was evaluated to be 0.10 mmol·L?1. Moreover, the higher activity of proteins in the nano-Au⊕ films could be retained compared with the electropolymerization membrane, since the pro- teins in nano-Au⊕ films retained their near-native structure. Direct electron transfer between hemoglo- bin and electrode and electrochemically catalyzed reduction of hydrogen peroxide on a modified elec- trode was studied, and the linear range was from 2.1×10-8 to 1.2 ×10?3 mol·L-1 (r = 0.994) with a detection limit of 1.1×10-8 mol·L-1 H2O2.     

Crystal Structures of Cs+-Crown Ether Complexes Containing Polynuclear Mercury Iodide Anions

Reactions of CsI and HgI₂ with benzo-15-crown-5 (B15C5) and 15-crown-5 (15C5) in an ethanol-acetone mixture produced [Cs(B15C5)₂]₂[Hg₂I₆] (1) and {[Cs(15C5)]₂[Hg₂I₆]}_n (2), respectively. The structures of the two complexes are quite different. Molar ratios of Cs⁺ : crown ether are 1 : 2 in 1 and 1 : 1 in 2. Complex 1 consists of two Cs(B15C5) ₂ ⁺ cations and a Hg₂I ₆ ^2- anion. Cs⁺ lies between the two crown-5 ligands, resulting in a sandwich-type cation. Cationic Cs(B15C5) ₂ ⁺ and anionic Hg₂I ₆ ^2- are linked together by electrostatic interactions and the complex 1 is an ion pair compound. Complex 2 consists of infinite [Cs(15C5)]₂[Hg₂I₆] units. Each structural unit contains two Cs(15C5)⁺ cations and a Hg₂I ₆ ^2- anion. Cs⁺ is coordinated by five oxygen atoms of 15C5, three iodine atoms of Hg₂I ₆ ^2- , and an iodine atom of Hg₂I ₆ ^2- in an adjacent structural unit. The interactions between the Cs⁺ of Cs(15C5)⁺ and an I^– in Hg₂I ₆ ^2- from adjacent structural units polymerize the complex 2, resulting in a one-dimensional network structure. The anions of Hg₂I ₆ ^2- in both complexes are similar. The two mercury atoms are linked through two bridging iodine atoms and each mercury is also coordinated by two terminal iodines. Crystal data for 1: space group P2₁/c (No. 14), a = 12.253(4), b = 20.945(7), c = 16.110(6) Å, = 111.0(1)°, V = 3860 ų, Z = 4, R = 0.082 (R _w = 0.089). Crystal data for 2: space group P2₁/c (No. 14), a = 12.157(4), b = 8.546(4), c = 20.666(6) Å, = 91.54(3)°, V = 2146 ų, Z = 4, R = 0.034 (R _w = 0.048).     

Potentiometric immunosensor based on antiserum of Japanese B encephalitis immobilized in nano-Au/polymerized o-phenylenediamine film

A novel potentiometric immunosensor for detection of Japanese B encephalitis vaccine was developed by immobilizing antiserum of Japanese B encephalitis on nano-Au/polymerized o-phenylenediamine (o-PDA) film on the platinum (Pt) electrode. The performance and factors influencing the performance of the resulting immunosensor were studied. The immunosensor showed a specific response to Japanese B encephalitis vaccine in the range 1.1 × 10⁻⁸ to 2.0 × 10⁻⁶ lgpfu/ml (plaque forming unit) with a detection limit of 6 × 10⁻⁹ lgpfu/ml. The correlation coefficient is 0.9986. The incubation time, incubation temperature, pH, reproducibility and stability of the immunosensor were also studied. The present work supplied a promising test method for biological products.