Multipartite Entanglement Preparation and Quantum Communication with Atomic Ensembles

We propose an experimentally feasible scheme to generate Greenberger-Horne-Zeilinger type of maximal entanglement among three atomic ensembles, and show one of the applications, controlled secure direct communication. The scheme involves laser manipulation of atomic ensembles, quarter- and half-wave plates, beam splitters, polarizing beam splitters and single-photon detectors, which are within the reach of current experimental technology.     

聚酰胺酸合成工艺研究

 采用超声波在线测量溶液粘度的方法，研究了合成聚酰胺酸过程中实验条件的影响，并对实验结果进行分析，由此确定了合成高分子量聚酰胺酸的最佳实验条件。研究表明：在加料次序为先加二胺后加二酐（二酐与二胺的摩尔比为1.01～1.02：1）、试剂中含水量尽可能少，反应温度0～5℃、反应时间以溶液粘度到达最大值为止的条件下，所合成的聚酰胺酸溶液粘度最大，可满足惯性约束聚变（ICF）充气腔靶端口膜的需要。     

Effects of nickel on the crystallization of Zr70Cu20Ni10 amorphous alloy

Differential scanning calorimetry (DSC) and x-ray diffraction (XRD) are employed to investigate the effects of nickel on the crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy. We have found that the crystallization process of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy is strongly influenced by the addition of nickel. Addition of 10 at% Ni to the Zr₇₀Cu₃₀ amorphous alloy makes the crystallization process proceed from a single-stage mode to a double-stage mode. The activation energy for crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy is calculated to be about 388kJ·mol^-1 on the basis of the Kissinger equation. The effects of nickel on the crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy are discussed in terms of the genetics of metals.     

矩孔金属光栅矢量模式理论的数值计算

根据矩孔金属光栅的矢量模式理论，计算了不同入射方向，波长及偏振态情况下衍射场的分布，研究了不同光栅结构对衍射效率，偏振态变化的影响；同时，根据实际需要，加工制作了一批不同深度的矩孔光栅样品，进行了实验测量，并将计算值与实验值进行了比较，两者基本相符。     

c轴定向氮化铝薄膜的制备

利用电子回旋共振 (ECR)微波增强化学气相沉积法 (PECVD)并使用氮气 (N2 ) ,氩气 (Ar)和AlCl3蒸气作为气源在直径为 6 .35cm的 (10 0 )单晶硅片表面制备了c轴定向氮化铝 (AlN)薄膜 ,并使用X射线衍射仪及其X射线特征能谱和扫描电镜 (SEM)分析了薄膜特征 ,研究了微波功率、基板温度和N2 流量对薄膜c轴定向的影响 ,得到了c轴偏差角小于 5°的高质量大面积AlN薄膜。     

Analysis of saltation characteristics of bed-load transport in flowing water

The study of bed-load transport is of great significance both in theory and in practice. This paper discusses the saltation of bed-load solid grains in flowing water. Experiments and theoretic analysis have been made by means of high-speed photographing and advanced data processing technique with a combined method based on mechanical and statistical theories. It indicates that the saltation is the main form of the bed-load transport under ordinary flowing conditions. In the meantime, taking successive saltation as the model of bed-load transport, systematic analysis has been made with regard to the kinematic properties and mechanism of saltation. The statistical analysis shows that the probability density functions of the relative height and length of saltation are in conformity with Γ-type distribution, while the probability density functions of the relative velocities of saltation are in conformity with the Gaussian distribution. The project supported by National Natural Science Foundation of China     

基于免疫算法的组合预测方法

利用免疫算法搜索全局最优解能力,提出了一种其于免疫算法的组合预测权系数确定的新方法,并给出了具体算法.仿真实验结果表明了免疫算法在组合预测方面具有很好的可行性和有效性.     

A novel fermentation process for calcium magnesium acetate (CMA) production from cheese whey

Applied Biochemistry and Biotechnology - A novel, anaerobic fermentation process is developed to produce calcium magnesium acetate (CMA) from cheese whey. CMA can be used as a noncorrosive road...     

离子束引起的在Al／Cr双层薄膜界面处的原子混合

用600keV的Kr~ 离子轰击Al/Cr双层薄膜样品进行界面原子反应及相互混合的研究。实验样品是在单晶硅上蒸镀约500nm厚的铝膜,相继再蒸上所需厚度的铬膜而制成的。轰击剂量为2.0×10~(15)-2.5×10~(16)Kr~ /cm~2。用2.0MeVa粒子对轰击前后的样品进行了卢瑟福背散射(RBS)分析,发现界面处有明显的原子混合存在;当轰击剂量≥1.0×10~(16)Kr~ /cm~2时,RBS谱出现有明显的坪台,经拟合计算和x射线衍射(XRD)测量证实确有化合物Al_(13)Cr_2存在;还分别得到了原子混合量及混合效率与轰击剂量的关系;最后对界面处的原子混合机制进行了讨论。