Topological hinge modes in Dirac semimetals

Dirac semimetals (DSMs) are an important class of topological states of matter. Here, focusing on DSMs of band inversion type, we investigate their boundary modes from the effective model perspective. We show that in order to properly capture the boundary modes, k-cubic terms must be included in the effective model, which would drive an evolution of surface degeneracy manifold from a nodal line to a nodal point. Sizable k-cubic terms are also needed for better exposing the topological hinge modes in the spectrum. Using first-principles calculations, we demonstrate that this feature and the topological hinge modes can be clearly exhibited in β-CuI. We extend the discussion to magnetic DSMs and show that the time-reversal symmetry breaking can gap out the surface bands and hence is beneficial for the experimental detection of hinge modes. Furthermore, we show that magnetic DSMs serve as a parent state for realizing multiple other higher-order topological phases, including higher-order Weyl-point/nodal-line semimetals and higher-order topological insulators.     

Pt/MIL-101(Cr)在肉桂醛选择性加氢反应中的催化性能

采用简单易行的浸渍法将Pt纳米粒子负载到MIL-101(Cr)上,制备了Pt/MIL-101(Cr)催化剂,并对其在肉桂醛选择性加氢反应的催化性能进行了研究。XRD、N₂吸附、TEM和催化性能的研究结果表明,Pt的负载量对负载于MIL-101(Cr)上Pt纳米粒子的尺寸及所制备催化剂对肉桂醇的选择性有很大影响。低Pt负载量(1.0%)的Pt/MIL-101(Cr)较其他MOFs和无机材料在肉桂醛选择性加氢反应中表现出了高的催化性能,在优化的反应条件下肉桂醛转化率和对肉桂醇的选择性可分别达96.5%和86.2%。Pt/MIL-101(Cr)催化剂具有良好的稳定性。Pt/MIL-101(Cr)所表现出的优良的催化性能同MIL-101(Cr)载体的孔道结构及其表面性质密切相关。     

硅衬底氮化镓基LED薄膜转移至柔性黏结层基板后其应力及发光性能变化的研究

本文将硅(Si)衬底上外延生长的氮化镓(GaN)基发光二极管(LED)薄膜转移至含有柔性黏结层的基板上, 获得了不受衬底和支撑基板束缚的LED薄膜. 利用高分辨率X射线衍射仪(HRXRD)研究了薄膜转移前后的应力变化, 同时对其光致发光(PL)光谱的特性进行了研究. 结果表明: 硅衬底GaN基LED薄膜转移至柔性基板后, GaN受到的应力会由转移前巨大的张应力变为转移后微小的压应力, InGaN/GaN量子阱受到的压应力则增大; 尽管LED薄膜室温无损转移至柔性基板其InGaN阱层的In组分不会改变, 然而按照HRXRD倒易空间图谱通用计算方法会得出平均铟组发生了变化; GaN基LED薄膜从外延片转移至柔性基板时其PL谱会发生明显红移.     

Solvothermal synthesis of nanoporous polymer chalk for painting superhydrophobic surfaces

Reported here is a facile synthesis of nanoporous polymer chalk for painting superhydrophobic surfaces. Taking this nanoporous polymer as a media, superhydrophobicity is rapidly imparted onto three typical kinds of substrates, including paper, transparent polydimethylsiloxane (PDMS), and finger skin. Quantitative characterization showed that the adhesion between the water droplet and polymer-coated substrates decreased significantly compared to that on the original surface, further indicating the effective wetting mode transformation. The nanoporous polymer coating would open a new door for facile, rapid, safe, and larger scale fabrication of superhydrophobic surfaces on general substrates.     

Adhesion behavior of endothelial progenitor cells to endothelial cells in simple shear flow

The adhesion of endothelial progenitor cells(EPCs) on endothelial cells(ECs) is one of the critical physiological processes for the regenesis of vascular vessels and the prevention of serious cardiovascular diseases.Here,the rolling and adhesion behavior of EPCs on ECs was studied numerically.A two-dimensional numerical model was developed based on the immersed boundary method for simulating the rolling and adhesion of cells in a channel flow.The binding force arising from the catch bond of a receptor and ligand pair was modeled with stochastic Monte Carlo method and Hookean spring model.The effect of tumor necrosis factor alpha(TNF-α) on the expression of the number of adhesion molecules in ECs was analyzed experimentally.A flow chamber system with CCD camera was set up to observe the top view of the rolling of EPCs on the substrate cultivated with ECs.Numerical results prove that the adhesion of EPC on ECs is closely related to membrane stiff-ness of the cell and shear rate of the flow.It also suggests that the adhesion force between EPC and EC by P-selectin glycoprotein ligand-1 only is not strong enough to bond the cell onto vessel walls unless contributions of other catch bond are considered.Experimental results demonstrate that TNF-α enhanced the expressions of VCAM,ICAM,P-selectin and E-selectin in ECs,which supports the numerical results that the rolling velocity of EPC on TNF-α treated EC substrate decreases obviously compared with its velocity on the untreated one.It is found that because the adhesion is affected by both the rolling velocity and the deformability of the cell,an optimal stiffness of EPC may exist at a given shear rate of flow for achieving maximum adhesion rates.     

少节点基因调控网络的控制

近年来,自组织振荡网络受到越来越多科学家的关注,对生物体的生长、发育起调控作用的基因调控网络即是其中的一种.本文研究了少节点基因调控网络的控制问题.运用多相位超前驱动方法对该种网络进行调控,可以有效地提高对网络的控制效率.通过数值模拟,发现对于少节点基因调控网络,当系统参数确定时,网络的有效控制率可以达到95％以上(10节点网络);当系统参数不确定时,控制的效率也非常高.     

Generation of entangled coherent states through cavity-assisted interaction

We propose schemes to generate an n-coherent-pulse GHZ state and a cluster state via the interaction between n coherent pulses and a two-sided cavity.In these schemes,a strong coupling condition is not needed,which makes the protocols possibly able to be implemented based on the current experiment technology.     

地基高频加热激励ELF/VLF波对辐射带高能电子的准线性散射

地球内、外辐射带电子通量的变化对于空间飞行器,尤其是中低轨卫星的防护有着非常重要的影响.基于回旋共振波粒相互作用的准线性理论,使用地基高频发射器发射电波调制低电离层背景电流可以人工激励ELF/VLF波,这些波能使辐射带相对论电子发生抛射角散射沉降进入大气层从而降低其生存期.为了定量地分析人工激励ELF/VLF波散射辐射带高能粒子的可行性,针对内、外辐射带,本文选取了两个典型区域：L=4.6和L=1.5.数值计算结果表明,在内、外辐射带由于ELF/VLF波的人工注入而造成的高能电子损失时间尺度很大程度上取决于冷等离子体参量α^*(∝B²/N₀,这里B是背景磁场,N₀是电子数密度)、电波频谱特性和功率,以及与波发生回旋共振的电子能量.一般来讲,在外辐射带人工ELF/VLF哨声波散射相对论电子使之沉降到大气层要容易得多;低能量的高能电子(200keV)要比高能量的相对论电子(500keV)更有效地通过抛射角散射进入大气层.考虑到高频电波加热电离层激励的ELF/VLF波可能会被捕获在磁层空腔中,来回反射从而得到增强,因此在适当的条件下,地基高频加热装置发射足够的电波功率进入电离层诱导大幅度ELF/VLF波注入到内磁层,能够在1至3天的时间尺度内快速散射外辐射带相对论电子使之沉降,也能够在10天量级的时间尺度里散射生存周期一般为100天甚至更长的内辐射带相对论电子. 关键词： 地基高频加热电离层 ELF/VLF波激励 高能电子散射和沉降 共振波粒相互作用     

Growth,structure and physical properties of gadolinium doped Sr2IrO4 single crystal

A series of Gd-doped Sr₂IrO₄ single crystals were grown using a flux method. Analysis of the temperature-dependent resistance of these crystals reveals that these samples show two-dimensional weak localization at 150 to 300 K, while three-dimensional variable range hopping (VRH) behavior is observed at temperatures lower than 150 K. Two localization lengths are observed in the VRH behavior, with a transition temperature of around 88 K. Correspondingly, temperature-dependent magnetization observations along the ab-plane reveal magnetic anomalies at both 150 and 85 K. This work demonstrates the correlation between the electrical and magnetic properties of 5d transition-metal compounds.     

Y沸石和多级孔Y沸石封装CuPhen配合物催化性能的比较

选用常规Y沸石和经后处理法制备的多级孔Y沸石为主体,采用自由配体法将铜菲咯啉(CuPhen)配合物封装在不同Y沸石中,制备了CuPhen/Y复合催化材料。采用X射线衍射、TEM、紫外-可见光谱、N_2吸附-脱附、ICP和TG等手段对所制备复合催化材料的物化性质进行了较为详细的表征,并对封装在不同Y沸石主体中的铜配合物在不同尺寸大小反应底物中的催化氧化性能进行了比较研究。结果表明,在以双氧水为氧化剂的反应体系中,封装于多级孔Y沸石中的铜配合物在不同环烷烃氧化反应中的催化活性均高于封装在常规Y沸石中的催化活性,体现出多级孔Y沸石更为优越的主体性能。此外,同封装于常规Y沸石中的铜配合物一样,封装在多级孔Y沸石主体中的金属配合物催化剂也具有良好的稳定性。