Phenol biosensor based on electrochemically controlled integration of tyrosinase in a redox polymer

An amperometric biosensor for the detection of phenolic compounds was developed based on the immobilization of tyrosinase within an Os-complex functionalized electrodeposition polymer. Integration of tyrosinase within the redox polymer assures efficient catechol recycling between the enzyme and the polymer bound redox sites. The non-manual immobilization procedure improves the reproducibility of fabrication process, greatly reduces the desorption of the enzyme from the immobilization layer, and, most importantly prevents fast inactivation of the enzyme by its substrate due to fast redox cycling. A two-layer sensor architecture was developed involving ascorbic acid oxidase entrapped within an electrodeposition polymer in a second layer on top of the redox polymer/tyrosinase layer. Using this sensor architecture it was possible to eliminate the current interference arising from direct ascorbate oxidation up to a concentration of 630 μM ascorbic acid. The effects of the polymer thickness, the enzyme/polymer ratio, and the applied potential were evaluated with respect to optimal sensor properties. The sensitivity of the optimized sensors for catechol was 6.1 nA μM⁻¹ with a detection limit of 10 nM, and for phenol 0.15 nA μM⁻¹ with a detection limit of 100 nM.     

A facile gamma-ray method for radiodegradation of bilirubin in chloroform

Kinetics and concentration profile associated with the regulated radiodegradation of bilirubin in an organic solvent were assessed. The pure unconjugated specimen was prepared in chloroform (40.0 μM). The depletion of bilirubin was almost linear with dose, and complete degradation was accomplished with doses in excess of 100 Gy. The method was also evaluated for the explicit production of the long-wavelength isomer of biliverdin, which was characterized spectrometrically by an absorbance band in the region 600–650 nm. Results including differences in air, N₂ and O₂ purged samples are presented to identify the atmospheric medium for optimum production of biliverdin. The process was regulated by controlling the dose. The general rate constant of the depletion process was estimated at a dose rate of 5.67·10⁻²Gy·s⁻¹. The method is a convenient substitute for light illumination studies of bilirubin. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and antibacterial activities of water‐soluble methacrylate polymers containing quaternary ammonium compounds

New water‐soluble methacrylate polymers with pendant quaternary ammonium (QA) groups were synthesized and used as antibacterial materials. The polymers with pendant QA groups were obtained by the reaction of the alkyl halide groups of a previously synthesized functional methacrylate homopolymer with various tertiary alkyl amines containing 12‐, 14‐, or 16‐carbon alkyl chains. The structures of the functional polymer and the polymers with QA groups were confirmed with Fourier transform infrared and ¹H and ¹³C NMR. The degree of conversion of alkyl halides to QA sites in each polymer was determined by ¹H NMR to be over 90% in all cases. The number‐average molecular weight and polydispersity of the functional polymer were determined by size exclusion chromatography to be 32,500 g/mol and 2.25, respectively. All polymers were thermally stable up to 180 °C according to thermogravimetric analysis. The antibacterial activities of the polymers with pendant QA groups against Staphylococcus aureus and Escherichia coli were determined with broth‐dilution and spread‐plate methods. All the polymers showed excellent antibacterial activities in the range of 32–256 μg/mL. The antibacterial activity against S. aureus increased with an increase in the alkyl chain length for the ammonium groups, whereas the antibacterial activity against E. coli decreased with increasing alkyl chain length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5965–5973, 2006     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.     

Selective adsorption, pre-concentration and matrix elimination for the determination of Pb(II), Cd(II), Hg(II) and Cr(III) using 1,5,9,13-tetrathiacyclohexadecane-3,11-diol anchored poly (p-chloromethylstyrene-ethyleneglycoldimethacrylate) microbeads

Poly(p-chloromethylstyrene-ethyleneglycoldimethacrylate) polymeric microbeads, poly(p-CMS-EGDMA), were synthesized and 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (S4HD) was attached chemically onto the polymeric microbeads. Characterization of all microbeads was done by Fourier transform-infrared spectrometry (FT-IR) and elemental analyzer. The amount of attached 1,5,9,13-tetrathiacyclohexadecane-3,11-diol to the polymer was found to be 2.23 mmol g⁻¹ polymers. The ligand attached microbeads, poly(p-CMS-EGDMA-S4HD), were used to examine the adsorption capacity of Pb(II), Cd(II), Hg(II) and Cr(II) ions for recovery, pre-concentration and the matrix elimination by changing the pH and the initial metal ion concentrations and also adsorption kinetics of the studied metal ions was determined. Pre-concentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery was between 92 and 106%. In the drinking, lake, tap and sea-water samples from water lands, ultra-trace toxic metal ion concentrations were determined easily by using ligand modified microbeads after pre-concentration because of the high pre-concentration factor and easily matrix elimination using ligand modified microbeads. Reference sea-water material was used for the validation of the method and it was found that recovery, pre-concentration and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3 M HCl containing 0.8 M thiourea was used and desorption ratio was obtained more than 96%.     

Investigation on the condensation of α and β ketoaldehydes with hydroxyaromatic compounds

Mechanism of the condensation reactions of methylglyoxal, phenylglyoxal and benzoylacetaldehyde with phenolic compounds have been discussed. It was observed that the reaction mechanisms changed depending on the type of the phenolic and also dicarbonyl compounds. While, methylglyoxal gave the angular methyl derivative of naphthofuraranonaphthofuran with 2‐naphthol, phenylglyoxal and its p‐chloro and p‐methoxy derivatives formed benzo[b]naphtho[2,1‐f]oxepine‐13‐ones. However, resorcinol behaved different and gave 2‐phenyl‐3‐(2,4‐dihydroxy)‐6‐hydroxy‐benzo[b]furans with phenylglyoxal derivatives. 2‐Phenyl‐4‐(2‐hydroxynaphmyl)‐4H‐naphtho[b]pyran was produced from the reaction of benzoylacetaldehyde and 2‐naphthol, but the reaction product was 3,9‐dihydroxy‐6‐phenyl‐6,12‐methano‐12H‐dibenzo[1,3]dioxocin when the same carbonyl compound reacted with resorcinol.     

Adsorption of N-Nitrosodiethylamine and N-Nitrosodimethylamine on Activated Carbon: A Pre-Concentration Procedure for Gas Chromatographic Analysis

In this study, a rapid pre-concentration procedure, which employs powdered activated carbon as a clean-up and pre-concentration material, is described for the gas chromatographic analysis of N-nitrosodiethylamine (NDEA) and N-nitrosodimethylamine (NDMA) in aqueous solutions. It was found that powdered activated carbon is suitable for the adsorption of volatile N-nitrosamine compounds from aqueous solutions. Adsorption efficiency with spiked beer samples (alcohol content 5% v/v) was found to be 80.5% (NDMA) and 89.4% (NDEA) and recovery of extraction from activated carbon was calculated as 82.1% (NDMA) and 89.7% (NDEA), respectively. The effect of 100µgmL^–1 of tannic acid on the adsorption was also studied, and no significant effect on the adsorption and extraction of volatile N-nitrosamine compounds was found.     

Eta6-mesityl,eta1-imidazolinylidene-carbene-ruthenium(II) complexes: catalytic activity of their allenylidene derivatives in alkene metathesis and cycloisomerisation reactions

The reaction of electron-rich carbene-precursor olefins containing two imidazolinylidene moieties [(2,4,6-Me(3)C(6)H(2)CH(2))NCH(2)CH(2)N(R)Cdbond;](2) (2a: R=CH(2)CH(2)OMe, 2 b R=CH(2)Mes), bearing at least one 2,4,6-trimethylbenzyl (R=CH(2)Mes) group on the nitrogen atom, with [RuCl(2)(arene)](2) (arene=p-cymene, hexamethylbenzene) selectively leads to two types of complexes. The cleavage of the chloride bridges occurs first to yield the expected (carbene) (arene)ruthenium(II) complex 3. Then a further arene displacement reaction takes place to give the chelated eta(6)-mesityl,eta(1)-carbene-ruthenium complexes 4 and 5. An analogous eta(6)-arene,eta(1)-carbene complex with a benzimidazole frame 6 was isolated from an in situ reaction between [RuCl(2)(p-cymene)](2), the corresponding benzimidazolium salt and cesium carbonate. On heating, the RuCl(2)(imidazolinylidene) (p-cymene) complex 8, with p-methoxybenzyl pendent groups attached to the N atoms, leads to intramolecular p-cymene displacement and to the chelated eta(6)-arene,eta(1)-carbene complex 9. On reaction with AgOTf and the propargylic alcohol HCtbond;CCPh(2)OH, compounds 4-6 were transformed into the corresponding ruthenium allenylidene intermediates (4-->10, 5-->11, 6-->12). The in situ generated intermediates 10-12 were found to be active and selective catalysts for ring-closing metathesis (RCM) or cycloisomerisation reactions depending on the nature of the 1,6-dienes. Two complexes [RuCl(2)[eta(1)-CN(CH(2)C(6)H(2)Me(3)-2,4,6)CH(2)CH(2)N- (CH(2)CH(2)OMe)](C(6)Me(6))] 3 with a monodentate carbene ligand and [RuCl(2)[eta(1)-CN[CH(2)(eta(6)-C(6)H(2)Me(3)-2,4,6)]CH(2)CH(2)N-(CH(2)C(6)H(2)Me(3)-2,4,6)]] 5 with a chelating carbene-arene ligand were characterised by X-ray crystallography.     

trans‐[1,3‐Bis(2,4,6‐trimethylphenyl)imidazolidin‐2‐ylidene]dichlorido(triphenylphosphine‐κP)palladium(II)

The title complex, [PdCl₂(C₂₁H₂₆N₂)(C₁₈H₁₅P)], shows slightly distorted square‐planar coordination around the Pd^II metal centre. The Pd—C bond distance between the N‐heterocyclic ligand and the metal atom is 2.028 (5) Å. The dihedral angle between the two trimethylphenyl ring planes is 36.9 (2)°.     

Selective palladium-catalyzed arylation(s) of benzaldehyde derivatives by N-heterocarbene ligands

The 2- or 2,6-position(s) of aromatic aldehydes were directly and selectively arylated with aryl chlorides or bromides in the presence of a catalytic system prepared in situ from Pd(OAc)₂, imidazolinium chlorides (1-5) and Cs₂CO₃.