氮掺杂石墨烯量子点/MOF衍生多孔碳纳米片构筑高性能超级电容器

首先采用溶液法在碳布上生长Co-MOF二维纳米片,通过高温退火和刻蚀后得到MOF衍生多孔碳纳米片。以Co-MOF衍生的多孔碳纳米片/碳布(CNS/CC)作为碳基骨架,采用电化学沉积法负载高活性氮掺杂石墨烯量子点(N-GQDs),制备得到分级多孔结构的N-GQD/CNS/CC复合材料。组装成自支撑且无粘结剂的N-GQD/CNS/CC电极,当电流密度为1 A·g~(-1)时,其比电容高达423 F·g~(-1)。通过储能机制和电容贡献机制的研究表明,在碳纤维上原位生长的具有高双电层电容的CNS和表面负载具有高赝电容的N-GQDs之间相互协同作用,使得N-GQD/CNS/CC电极具有高电容性能,是一种理想的超级电容器电极材料。电极材料的高导电、分级多孔结构有利于电子的传输和电解质离子的扩散,具有良好的动力学性能,能快速充放电和具有优异的倍率特性。将电极组装成对称型超级电容器,功率密度为250 W·kg~(-1)时对应的能量密度达到7.9 Wh·kg~(-1),且经过10 000次循环后电容保持率为91.2%,说明氮掺杂石墨烯量子点/MOF衍生多孔碳纳米片复合材料是一种电化学性能稳定的具有高电容性能的全碳电极材料。     

新型有序结构分子聚集体的构筑

本文概述了近年来我们在新型有序结构分子聚集体构筑方面取得的一些主要成绩，并展望了今后进一步的研究和发展方向。     

CRYSTALLIZATION AND MELTING OF NYLON 610

Differential scanning calorimetry was used to study the crystallization andmelting of nylon 610. For nylon 610 crystallized from the melt state (260℃), the overall rateof bulk crystallization can be described by a simple Avrami equation with Avrami exponentn ≈ 2, independent of crystallization temperature. With the experimentally obtainedT_m~0 (235℃ ～ 255℃) of nylon 610, the fold surface free energy σ_e was determined to be35 ～38 erg/cm~2. The effects of annealing temperature and time on the melting of quenchednylon 610 were also investigated. For nylon 610 quenched at room temperature there isonly one DSC endotherm peak DSC scans on annealed samples exhibited an endothermpeak at approximately 10℃ above the annealing temperature. The size and position of theendothermic peak is strongly related to annealing temperature and time. An additionalthird melting was observed when quenched nylon 610 was annealed at high temperaturefor a sufficiently long residence time. The existence of the third melting peak suggests thatmore than one kind of distribution of lamella thickness may occur when quenched nylon610 is annealed. The implications of these results in terms of crystal thickening mechanismwere discussed.     

Effect of rGO on polymer-dispersed liquid crystal fabricated by RAFT polymerisation

In this study, we demonstrated that doping polymer matrix with a small amount of reduced graphene oxide (rGO) component (0.05–0.2%) had significant influence on the polymerisation kinetics and electro-optical performances of polymer-dispersed liquid crystal films (PDLCs) fabricated with macro reversible addition-fragmentation chain transfer agents. The effects of rGO content were studied in terms of morphology, compound viscosity, polymer conductivity, polymerisation kinetics and driving voltage of PDLCs. The results exhibited that higher rGO content increased the compound viscosity and the entire process proceeded slowly. Furthermore, the addition of rGO increased the polymer conductivity and local electric field, and reduced the saturation voltage as well as the threshold voltage from 27.3 to 19.5 V and 13.2 to 6.41 V, respectively.     

化学蒸气发生-电感耦合等离子体原子发射光谱法测定地质样品中痕量金

地质样品经盐酸-硝酸(3+1)混合酸溶解,活性炭分离富集后,于90℃用12g.L-1硼氢化钠溶液(溶于0.5g.L-1氢氧化钠溶液中)作还原剂,用化学蒸气发生-电感耦合等离子体原子发射光谱法测定其中痕量的金。金的质量浓度在1 500μg.L-1以内与其发射强度呈线性关系,方法的检出限(3s)为0.59μg.L-1。方法用于测定2个标准物质(GBW 07289和GBW 07291)中金含量,测定值与认定值相符。     

可注射型酶促高分子水凝胶的制备及表征

利用聚乙二醇（PEG，相对分子质量2 000）与对羟基苯丙酸（DAT）的酯化反应得到凝胶因子，在辣根过氧化物酶（HRP）和过氧化氢催化体系的作用下，制备了一种新型的能快速固化的可注射型水凝胶。研究了HRP、凝胶因子和过氧化氢浓度对凝胶时间的影响，结果表明，当凝胶因子浓度高、HRP浓度高、过氧化氢浓度较低时，凝胶时间较短，最短可在3 s内凝胶。采用红外光谱和核磁共振氢谱对凝胶因子的结构进行了表征，并提出了HRP/H2O2酶促催化下凝胶因子的自由基聚合机理。     

A new MnxOy/carbon nanorods derived from bimetallic Zn/Mn metal–organic framework as an efficient oxygen reduction reaction electrocatalyst for alkaline Zn-Air batteries

Journal of Solid State Electrochemistry - In this work, nanorods like bimetallic Zn/Mn metal–organic-frameworks (MOFs) are proposed as the precursor for preparing MnxOy/porous carbon...     

Advantageous Interfacial Effects of AgPd/g-C3N4 for Photocatalytic Hydrogen Evolution: Electronic Structure and H2O Dissociation

Bimetallic AgPd nanoparticles have been synthesized before, but the interfacial electronic effects of AgPd on the photocatalytic performance have been investigated less. In this work, the results of hydrogen evolution suggest that the bimetallic AgPd/g-C₃N₄ sample has superior activity to Ag/g-C₃N₄ and Pd/g-C₃N₄ photocatalysts. The UV/Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, CO adsorption diffuse reflectance FTIR spectroscopy, and FTIR results demonstrate that in the AgPd/g-C₃N₄, the surface electronic structures of Pd and Ag are changed, which is beneficial for faster photogenerated electron transfer and greater H₂O molecule adsorption. In situ ESR spectra suggest that, under visible light irradiation, there is more H₂O dissociation to radical species on the AgPd/g-C₃N₄ photocatalyst. Furthermore, DFT calculations confirm the interfacial electronic effects of AgPd/g-C₃N₄, that is, Pd^δ−⋅⋅⋅Ag^δ+, and the activation energy of H₂O molecule dissociation on AgPd/g-C₃N₄ is the lowest, which is the main contributor to the enhanced photocatalytic H₂ evolution.     

Two novel Co (II)-coordination polymers as bifunctional materials for efficient photocatalytic degradation of dyes and electrocatalytic water oxidation

Two novel Co (II)- coordination polymers (CPs) based on 2,5-bis(4-carboxylpheny)-1,3,4-oxadiazole (bcpo), namely [Co/(bcpo)_0.5(tib)(H₂O)₂]_n (1) and [Co (bcpo)_0.5(bidpe)(H₂O)₂]_n (2) (tib = 1,3,5-tirs(1-imidazolyl)benzene, bidpe = 4,4′-bis (imidazolyl)diphenyl ether) have been synthesized under solvothermal conditions and characterized by powder X-ray diffraction (PXRD), single crystal X-ray diffraction, photochemistry as well as electrochemistry. The investigation of the photo-degradation methyl blue and methyl violet (MB, MV) properties of CPs 1–2 demonstrates that CP 1 shows great performance for the degradation of MB, and CP 2 could efficiently degrade MB/MV. Meanwhile, the possible photo-degradation mechanism has been proposed and explored. Simultaneously, electrochemistry studies show that both CPs 1 and 2 can catalyze water oxidation under an alkaline condition at the potential around 1.20 V vs. NHE with relatively low overpotential of 330–510 mV vs. NHE.