Enantioselective total syntheses of manzamine a and related alkaloids

As a prelude to undertaking the total syntheses of the complex manzamine alkaloids, a series of model studies were conducted to establish the scope and limitations of intramolecular [4 + 2] cycloadditions of N-acylated vinylogous ureas with the trienic substrates 17a,b, 28a,b, and 34. These experiments clearly demonstrated that the geometry of the internal double bond and the presence of an electron-withdrawing group on the diene moiety were essential for the facile and stereoselective formation of the desired cycloadducts. The enantioselective syntheses of the manzamine alkaloids ircinol A (75), ircinal A (5), and manzamine A (1) were then completed by employing a convergent strategy that featured a novel domino Stille/Diels-Alder reaction to construct the tricyclic ABC ring core embodied in these alkaloids. Thus, the readily accessible chiral dihydropyrrole 58 was first converted in a single chemical operation into the key tricyclic intermediate 60. Two ring-closing metathesis reactions were then used to form the 13- and 8-membered rings leading to Z-72 and 74, the latter of which was quickly elaborated into ircinal A (5) via ircinol A (75). The synthetic 5 thus obtained was converted into manzamine A (1) following literature precedent. This concise synthesis of ircinal A required a total of 24 operations from commercially available starting materials with the longest linear sequence being 21 steps.     

Evaluation of capillary isoelectric focusing in glycerol-water media with a view to hydrophobic protein applications

Capillary isoelectric focusing (CIEF) separations are usually performed with neutral coated fused-silica capillaries in aqueous anticonvective media. Glycerol, a very viscous solvent (eta = 945 mPa x s at 25 degrees C), known to help stabilize any kind of proteins and solubilize hydrophobic ones, was tested as an alternative to using commercial gels. Viscosity and electroosmotic mobility were measured as a function of gel or glycerol content in water, and a 30:70 v/v glycerol-water medium appeared as a good compromise for performing CIEF in a bare fused-silica capillary without imposing too high a viscosity. To demonstrate the feasibility of this new CIEF system, a standard mixture of nine model proteins was separated according to their pI with a good agreement between experimental and literature aqueous pIs. Moreover, better resolution was achieved with this system than with the conventional aqueous CIEF system, as two of the model proteins could not be separated in the latter system. Glycerol-water CIEF in bare silica capillary was next applied to the separation of horse radish peroxidase, a complex mixture of protein isoforms. The good concordance with the separation obtained by the conventional CIEF system indicated the adequacy of this new system. Finally, as anticipated from the results obtained for the separation of bacteriorhodopsin, a membrane protein, glycerol-water CIEF performed in bare silica capillary appears to be a promising alternative to conventional aqueous CIEF for hydrophobic protein characterization, under their native form.     

Modification of the Cp′ ring in the ferrocifen precursor and its influence on the recognition by the estrogen receptor

A synthetic pathway giving access to diphenyl ethylene organometallic derivatives possessing the ferrocifen precursor skeleton modified in the Cp′ ring is described. It relies on reaction of the (η⁵-propionylcyclopentadienyl) (η⁶-benzene)iron(II) salt 7 with substituted cyclopentadienyl anions or their heteroanalogs followed by the McMurry coupling reaction with 4,4′-dihydroxybenzophenone. Using this approach pentamethylcyclopentadienyl and 3,4-dimethylphospholyl analogs of ferrocifen precursor (10 and 11) have been synthesized. Even with the presence of the bulky and containing phosphorus η⁵-ligands these compounds are still recognized by the two subtypes of estrogen receptor(ERα and ERβ).     

Non-aqueous capillary electrophoresis of the positional isomers of a sulfated monosaccharide

A non-aqueous capillary electrophoresis (NACE) method coupled to indirect absorbance detection has been developed for the separation of the three positional isomers of monosulfated fucose. The optimized electrolyte was composed of 12 mM ethanolamine, 2 mM trimesic acid buffer in a methanol-ethanol (1:1, v/v) mixture. As the retained electrolyte entails no separating agent other than the pH buffer, the NACE separation of the positional isomers has been ascribed mainly to selective ion-pairing with the electrolyte counter-ion and the possibility of a selective solvation effect in the alcohol mixture. In the absence of pure isomeric standards, peak identification was completed by MS and NMR spectroscopy and selective enzymatic desulfation. This method should be of interest for the structure elucidation of monosulfated fucose-based polysaccharides and for the screening of sulfoesterase of unknown activity.     

ULTRAVIOLET LIGHT-INDUCED FREE RADICAL FORMATION IN SKIN: AN ELECTRON PARAMAGNETIC RESONANCE STUDY

It has been suggested that ultraviolet light induces free radical formation in skin, leading to photoaging and cancer. We have demonstrated by electron paramagnetic resonance that the ascorbate free radical is naturally present in unexposed skin at a very low steady state level. When a section of SKH-1 hairless mouse skin in an EPR cavity is exposed to UV light (4,500 J m⁻²−1, Xe lamp, 305 nm cutoff and IR filters), the ascorbate free radical signal intensity increases. These results indicate that UV light increases free radical oxidative stress, consistent with ascorbate's role as the terminal, small-molecule antioxidant. The initial radicals produced by UV light would have very short lifetimes at room temperature; thus, we have applied EPR spin trapping techniques to detect these radicals. Using α-[4-pyridyl 1-oxide]-N- tert -butyl nitrone (POBN), we have for the first time spin trapped a UV light-produced carbon-centered free radical from intact skin. The EPR spectra exhibited hyperfine splittings that are characteristic of POBN/alkyl radicals, a^N= 15.56 G and a^H= 2.70 G, possibly generated from membrane lipids as a result of β-scission of lipid alkoxyl radicals. Iron can act as a catalyst for free radical oxidative reactions; chronic exposure of skin to UV radiation causes increased iron deposition. Using our spin trapping system, we have shown that topical application of the iron-chelator, Desferal, to a section of skin reduces the UV light-induced POBN adduct radical signal. These results provide direct evidence for free radical generation and a role for iron in UV light-induced dermatopathology. We suggest that iron chelators can serve as photoprotective agents by preventing these oxidations.     

On the affinity of cytosine towards electrophiles

Ab initio SCF computations on the intrinsic preferences of the H⁺, CH ₃ ⁺ and C₂H ₅ ⁺ cations towards the two principal sites of protonation or alkylation on cytosine, N₃ or O₂, show that this preference undergoes a continuous modification with the increase in size and complexity of the cation. N₃ is the preferred site of fixation of H⁺, O₂ the preferred site of C₂H ₅ ⁺ , while CH ₃ ⁺ has no marked preference. The exchange repulsion term of the binding energy appears responsible for the preference of C₂H ₅ ⁺ for O₂.This work was supported by the Ligue Francaise contre le Cancer and the National Foundation for Cancer Research (USA)     

Monte Carlo versus molecular dynamics simulations in heterogeneous systems: an application to the n-pentane liquid-vapor interface

The Monte Carlo (MC) and molecular dynamics (MD) methodologies are now well established for computing equilibrium properties in homogeneous fluids. This is not yet the case for the direct simulation of two-phase systems, which exhibit nonuniformity of the density distribution across the interface. We have performed direct MC and MD simulations of the liquid-gas interface of n-pentane using a standard force-field model. We obtained density and pressure components profiles along the direction normal to the interface that can be very different, depending on the truncation and long range correction strategies. We discuss the influence on predicted properties of different potential truncation schemes implemented in both MC and MD simulations. We show that the MD and MC profiles can be made in agreement by using a Lennard-Jones potential truncated via a polynomial function that makes the first and second derivatives of the potential continuous at the cutoff distance. In this case however, the predicted thermodynamic properties (phase envelope, surface tension) deviate from experiments, because of the changes made in the potential. A further readjustment of the potential parameters is needed if one wants to use this method. We conclude that a straightforward use of bulk phase force fields in MD simulations may lead to some physical inconsistencies when computing interfacial properties.     

Electrochemistry and photoelectron spectroscopy of oxomolybdenum(V) complexes with phenoxide ligands: effect of para substituents on redox potentials,heterogeneous electron transfer rates,and ionization energies

Complexes of the form (Tp*)MoOCl(p-OC(6)H(4)X) and (Tp*)MoO(p-OC(6)H(4)X)(2) (Tp* = hydrotris(3,5-dimethyl-1-pyrazolyl)borate and X = OEt, OMe, Et, Me, H, F, Cl, Br, I, and CN) were examined by electrochemical techniques and gas-phase photoelectron spectroscopy to probe the effect of the remote substituent (X) on electron-transfer reactions at the oxomolybdenum core. Cyclic voltammetry revealed that all of these neutral Mo(V) compounds undergo a quasireversible one-electron oxidation (Mo(VI)/Mo(V)) and a quasireversible one-electron reduction (Mo(V)/Mo(IV)) at potentials that linearly depend on the electronic influence (Hammett sigma(p) parameter) of X. The first ionization energies for (Tp*)MoO(p-OC(6)H(4)X)(2) (X = OEt, OMe, H, F, and CN) were determined by photoelectron spectroscopy. A nearly linear correlation was found for the Mo(VI)/Mo(V) oxidation potentials in solution and the gas-phase ionization energies. Calculated heterogeneous electron-transfer rate constants show a slight systematic dependence on the substituent.     

Retention of Cr(III) by high-performance chelation ion chromatography interfaced to inductively-coupled plasma mass spectrometric detection with collision cell

High-performance chelation ion chromatography (HPCIC) was employed to retain cationic Cr(III) on an anion-exchange column and hence allow the separation of the two most prevalent forms of chromium, Cr(II) and Cr(VI). A mobile phase of nitric acid was utilized at pH = 1.5; additionally, 2,6-pyridinedicarboxylic acid was used at a concentration of 6 mM. Additives with different structural characteristics were used in an effort to elucidate retention mechanisms. Inductively-coupled plasma mass spectrometry was used for chromium detection. A collision cell was utilized to reduce chloride-based polyatomic ions that may interfere with the detection of Cr(III), and a detection limit study yielded levels in the low part-per-billion range. The newly developed method was applied to the chromatographic analysis of samples of an incubation medium containing Cr(VI) incubated with cell nuclei.     

Atom transfer radical homo‐ and block copolymerization of methyl 1‐bicyclobutanecarboxylate

A non‐olefinic monomer, methyl 1‐bicyclobutanecarboxylate (MBC), was successfully polymerized by the controlled/“living” atom transfer radical polymerization (ATRP) technique, resulting in a well‐defined homopolymer, PMBC, with only cyclobutane ring units in the polymer chain. An AB block copolymer poly(methyl 1‐bicyclobutanecarboxylate)‐b‐polystyrene (PMBC‐b‐PS), having an all‐ring unit segment, was also synthesized with narrow polydispersity and designed number‐average molecular weight in addition to precise end groups. The ¹H NMR spectra, glass‐transition temperature, and thermal stability of PMBC, PMBC‐b‐PS, and PS‐b‐PMBC were investigated. The experimental results showed that the cyclobutane rings in the two block polymers improved their thermal stability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1929–1936, 2002