Crystal structure of an ammonium thiocyanate complex of 18–crown–6

The title compound (C₁₃H₃₀N₂O₇S) has been determined from three‐dimensional X‐ray diffraction data. The crystals are monoclinic, a = 22.654(8) Å, b = 8.652(4) Å, c = 23.925(9) Å, β = 123.880(9)°, V = 3893(3) ų, Z = 8, D_calc = 1.192 g/cm³, space group C2/c. The structure was solved by direct methods and refined by full‐matrix least squares method (R = 0.051). The ammonium cation is displaced by 1.08 Å from the mean plane of the ligand causing hydrogen bonding with the macrocyclic O atoms in a perching arrangement. The thiocyanate anion forms an extended hydrogen bonded chain with the cation via the occluded water molecule. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and Dislocation Etching of InBi0.8Sb0.2 Single Crystal

InBi_0.8Sb_0.2 single crystals have been grown by zone melting method. The freezing interface temperature gradient of 3 °C/cm has been found to yield the best quality crystals obtainable at growth velocity 1.0 cm/hr. Traingular features have been obtained on the free surface of the as grown crystal. A new dislocation etchant based on nitric acid has been found to give reproducible etch-pitting on the cleavage surface. Standard tests for a dislocation etchant have been carried out and results are reported.     

Alterations in peristaltic pumping of Jeffery nanoliquids with electric and magnetic fields

The combined effects of electric and magnetic fields on peristaltic flow of Jeffery nanoliquids are analytically investigated. Double-diffusive convection in the asymmetric microchannel is also carried out. The walls of the microchannel are propagating with a finite phase difference in a sinusoidal manner. Rosseland diffusion flux model is employed to examine the thermal radiation effect. The zeta potential on the walls is considered very low to apply Hückel–Debye approximations. The coupled non-linear governing equations are simplified by using dimensional analysis and lubrication theory. The closed form solutions for potential function, nanoparticle fraction field, solute concentration field, temperature field, stream function, and axial velocity are derived under the appropriate boundary conditions. It is noteworthy that the pumping characteristics strongly depend on the magnetic fields, electric fields, electric double layer thickness, Jeffery parameter, thermal radiation and Grashof number. Furthermore, trapping phenomenon is analyzed under the effects of Hartmann number, Jeffrey parameter, Grashof number and Helmholtz–Smoluchowski velocity. The novelty of the present work is the amalgamation of biomimetics (peristaltic propulsion), electro-magneto-hydrodynamics and nanofluid dynamics to produce a smart pump system model for smart drug delivery systems.     

Dielectric properties of lanthanum-doped CaCu3Ti4O12 synthesized by semi-wet route

Effect of La³⁺ doping at Ca²⁺ site in CaCu₃Ti₄O₁₂ has been examined. Compositions with x=0.10, 0.20 and 0.30 were synthesized in the system Ca_(1−3x/2)La_xCu₃Ti₄O₁₂ by semi-wet method. Powder X-ray diffraction confirmed the formation of monophasic compounds. The structure remains cubic similar to CaCu₃Ti₄O₁₂. Lattice parameter increases slightly with increasing La³⁺ concentration. Microstructure has been studied using scanning electron microscopy (SEM). Average grain size is in the range 2-4 μm for various compositions. Energy-dispersive spectrometer (EDS) studies confirm the stoichiometry of the synthesized materials. Dielectric constant, dielectric loss and conductivity of the samples decrease with increasing lanthanum concentrations.     

Adsorption of Safranin-T from wastewater using waste materials- activated carbon and activated rice husks

Textile effluents are major industrial polluters because of high color content, about 15% unfixed dyes and salts. The present paper is aimed to investigate and develop cheap adsorption methods for color removal from wastewater using waste materials activated carbon and activated rice husk-as adsorbents. The method was employed for the removal of Safranin-T and the influence of various factors such as adsorbent dose, adsorbate concentration, particle size, temperature, contact time, and pH was studied. The adsorption of the dye over both the adsorbents was found to follow Langmuir and Freundlich adsorption isotherm models. Based on these models, different useful thermodynamic parameters have been evaluated for both the adsorption processes. The adsorption of Safranin-T over activated carbon and activated rice husks follows first-order kinetics and the rate constants for the adsorption processes decrease with increase in temperature.     

Oxo- and oxoperoxo-molybdenum(VI) complexes with aryl hydroxamates: synthesis, structure, and catalytic uses in highly efficient, selective, and ecologically benign peroxidic epoxidation of olefins

A solution obtained by dissolving MoO3 in H2O2 reacts separately with secondary hydroxamic acids (viz., N-benzoyl N-phenyl hydroxamic acid (BPHAH), N-benzoyl N-ortho-, -meta-, -para-tolyl hydroxamic acids, (BOTHAH, BMTHAH, and BPTHAH, respectively), and N-cinnamoyl N-phenyl hydroxamic acid (CPHAH) affording [MoO(O2)(BPHA)2] (1), [MoO(O2)(BOTHA)2] (2), [MoO(O2)(BMTHA)2] (3), [MoO(O2)(BPTHA)2] (4), and [Mo(O)2(CPHA)2](5), respectively. The O and O2 are situated cis to each other in 2-4, but in each case, they are disordered and distributed over four sites. This disorder does not exist in the 6-coordinate cis dioxo complex 5, to which crude MoO(O2)(CPHA)2 (5') was converted during recrystallization. An aqueous molybdate solution readily reacts with all those hydroxamic acids producing [Mo(O)2(hydroxamate)2] (6). While 2, 3, and 4 possess a very distorted pentagonal bipyramidal structure, 5 has a distorted octahedral geometry. In the solid state, as well as in solution, 5 exists as two apparently enantiomerically related molecules differing in the orientation of the pendant phenyl rings. To emphasize that the formation and structural uniqueness of 5 compared to 1-4 is caused by the influence of the cinnamoyl residue, one compound of the 6 series, namely, [Mo(O)2(BPHA)2] (6A), was structurally characterized to prove directly that the special stereochemical properties of 5 rely on the special electronic structure of CPHA- ligand. Complexes 1-5, as well as 6, show high potential and selectivity as catalysts in the epoxidation of olefins at room temperature in the presence of NaHCO3 as a promoter and H2O2 as a terminal oxidant. A comparative epoxidation study has been performed to determine the relative efficiency of the catalysts. To make the epoxidation method cost effective, a study to optimize the use of H2O2 has also been performed. To obtain evidence in favor of our suggested mechanism to this homogeneous olefin --> epoxide conversion, it was necessary to synthesize a peroxo-rich compound, namely, [MoO(O2)2BMTHA]- (7), but the attempted synthesis culminated in the isolation of [MoO(O2)2(C6H5COO)]- (8), obviously, via the hydrolysis of coordinated BMTHA.     

Generation of sub wavelength super long dark channel using azimuthally polarized annular multi-Gaussian beam

We investigate the interesting focal properties of phase modulation azimuthally polarized annular multi Gaussian beam employing a high numerical aperture (NA) lens on the basis of vector diffraction theory. We observe that our proposed system generates a sub wavelength focal hole of \(0.43 \uplambda \) having large uniform focal depth of \(84 \uplambda \) . This kind of nondiffracting focal hole is called dark channel, which may have applications in atom optical experiments, such as with atomic lenses, atom traps, and atom switches.     

Incorporation and controlled release of silyl ether prodrugs from PRINT nanoparticles

Asymmetric bifunctional silyl ether (ABS) prodrugs of chemotherapeutics were synthesized and incorporated within 200 nm × 200 nm particles. ABS prodrugs of gemcitabine were selected as model compounds because of the difficulty to encapsulate a water-soluble drug within a hydrogel. The resulting drug delivery systems were degraded under acidic conditions and were found to release only the parent or active drug. Furthermore, changing the steric bulk of the alkyl substituents on the silicon atom could regulate the rate of drug release and, therefore, the intracellular toxicity of the gemcitabine-loaded particles. This yielded a family of novel nanoparticles that could be tuned to release drug over the course of hours, days, or months.     

Application of INAA for phyto-accumulation study of selenium by chickpea plant

The phyto-accumulation efficacy of selenium (Se) from soil by chickpea plant is reported. Chickpea plants were grown in soil having different concentrations (1–4 mg kg^?1) of Se. Samples of soil and different parts of chickpea plants in Se rich soil were analyzed for determination of Se concentrations by instrumental neutron activation analysis (INAA). Samples were irradiated in self-serve facility of CIRUS reactor, BARC, Mumbai at a neutron flux of the order of 10¹³ cm^?2 s^?1. The gamma activity at 264.7 keV of ⁷⁵Se (119.8 d) was measured using a 45% relative efficiency HPGe detector coupled to MCA. Dependence of Se distribution in soil and plants on its spiking concentration was evaluated in this work. The Se concentrations determined in plant parts grown in control soil and in soil spiked with Se (4 mg kg^?1) are in the range of 0.6–0.8 and 65–68 mg kg^?1 respectively.