（Ti,Al）N Film on Normalized T8 Carbon Tool Steel Prepared by Pulsed High Energy Density Plasma Technique

Under optimized operating parameters, a hard and wear resistant （Ti,Al）N film is prepared on a normalized T8 carbon tool steel substrate by using pulsed high energy density plasma technique. Microstructure and composition of the film are analysed by x-ray diffraction, x-ray photoelectron spectroscopy, Auger electron spectroscopy and scanning electron microscopy. Hardness profile and tribological properties of the film are tested with nano- indenter and ring-on-ring wear tester, respectively. The tested results show that the microstructure of the film is dense ahd uniform and is mainly composed of （Ti,Al）N and A1N hard phases. A wide transition interface exists between the film and the normalized T8 carbon tool steel substrate. Thickness of the film is about lO00nm and mean hardness value of the film is about 26 GPa. Under dry sliding wear test conditions, relative wear resistance of the （Ti, Al）N film is approximately 9 times higher than that of the hardened T8 carbon tool steel reference sample. Meanwhile, the （Ti,Al）N film has low and stable friction coefficient compared with the hardened T8 carbon tool steel reference sample.     

Structure Characterization of HSQ Films for Low Dielectrics Using D5 as Sacrificial Porous Materials

Low-density materials, commercially available hydrogensilsesquioxane （HSQ） offer a low dielectric constant. HSQ films can be obtained by spin on deposition （SOD）. In this work, low-dielectric-constant HSQ films are prepared by using D5 （decamethylcyclopentasiloxane） as sacrificiaJ porous materials. The dielectric constant of silica films significantly changes from 3.0 to 2.4. We report the structural aspects of the films in relation to their composition after annealed at 300℃, 400℃, and 500℃ for 1.5h in nitrogen ambient and annealed at 400℃ for 1.5h in vacuum. Si-OH appears after annealed at 400℃ for 1.5h in vacuum. The results indicate that the proper condition is in nitrogen ambient. Intensity of the Sill peak increases with the increasing temperature. Fourier transform infrared spectroscopy is used to identify the network structure and cage structure of Si-O-Si bonds and other possible bonds. Dielectric constant k is significantly lowered by annealing at 350℃ for 1.5h in nitrogen ambient. The I-V and C-V measurements are used to determine the dielectric constant, the electric resistivity and the breakdown electric field.     

地面目标红外特性及其隐身技术研究

随着红外搜索与制导技术的飞速发展,对于地面目标红外特征及其隐身技术的研究具有越来越重要的军事意义.在简化目标传热模型的基础之上,计算出目标的瞬时温度变化,并与背景的温度比较发现,目标与背景在一天之中均存在明显温差,最大温差可达10℃.从目标与背景的辐射对比度出发,分析了辐射对比度与目标表面发射率以及目标与背景温差的关系,发现了当目标与背景温差控制在±4℃之内时,采用固定发射率涂料可以使目标达到红外隐身的目的.     

二次风率对分级进风燃烧室内湍流燃烧与NOx生成的影响

本文在分级进风燃烧室的热态实验装置上,测量了燃烧室内湍流燃烧的温度场和组分浓度场,研究了分级进风的流量比率即二次风率对燃烧及NOx生成的影响.得到了四组不同二次风率下燃烧室内气体温度和O2、CO2、CO与NO浓度的分布.     

Strengthened Hyper-Raman Lines with the Coherent Superposition State

High-order harmonic generations from a one-dimensional Coulomb potential atom are calculated with the initial state prepared as a coherent superposition between its ground and first excited states. When the energy difference of the two states is small, we can choose proper laser pulse such that the first excited state can be excited only to other bound states instead of being ionized. We show that only the hyper-Raman lines are observable instead of the harmonics. The energy difference of the ground and the first excited state can be deduced from the highest peak of the hyper-Raman lines. We further show that the similar results can be obtained by using a combination of two laser pulses with different frequencies interacting with the atom initially at the ground state.     

托卡马克微波预电离等离子体

使用回旋管系统产生的电子回旋波段的大功率微波在托卡马克中得到无电流等离子体。其电子密度达8×10¹²cm^-3,电子温度达50eV,粒子约束时间约为0.5ms,加热效率达25％以上。研究了对环向击穿的影响及加热机制。     

(h,ψ)-广义单调与(h,ψ)-广义凸

本文定义了几种(h,ψ)-广义凸性及(h,ψ)-广义单调性,讨论了广义(h,ψ)-方向导数与Clarke方向导数,广义(h,ψ)-梯度集与Clarke梯度集等的相关关系.利用此关系证明了这些广义凸性与广义单调性之间的相关关系,同时还揭示了这些广义凸性、单调性与通常广义凸性、单调性存在的内在联系.     

方形管道中湍流水流某些特征的激光多普勒法测量及其与圆形管道的对比

用激光多普勒测速法测量了雷诺数从4.76×10~3到4.76×10~4的矩形管道中的湍流水流。其结果与相同雷诺数时的圆形管道的流动就某些流动特征进行了对比。引人注目的是,在矩形管道内速度分布更“平坦”,且随雷诺数的增加而强烈地趋向更加均匀,湍流强度也比圆管流动的大得多。在横截面的中线上,对四种不同雷诺数所得的速度分布数据与普适的湍流速度外部定律有较好的符合。为了保持湍流的功率谱以及减小频带加宽,在测量仪器方面使用了某些技术。由Berman和Dunning所给出的有关速度梯度加宽的效应的式子也从本测量中得到了实验数据的支持。