环己酮肟在改性氧化锆催化剂上的Beckmann重排反应Ⅱ．影响重排反应的若干因素

环己酮肟在改性氧化锆催化剂上的Ｂｅｃｋｍａｎｎ重排反应Ⅱ．影响重排反应的若干因素程时标徐柏庆唐守平蒋山蔡天锡王祥生（大连理工大学化工学院化学系，大连１１６０１２）关键词氧化硼，氧化锆，负载型催化剂，环己酮肟，Ｂｅｃｋｍａｎｎ重排反应，己内酰胺前文［１...     

簇合物Mo_2X_8~(4-)(X=Cl,Br)低能态电子光谱

应用间略微分重叠自洽场和组态作用(INDO/S-CI)方法,计算双核簇合物Mo_2X_8~(4-)(X=Cl,Br)基态~1A_(1g)至不同低能态的d电子自旋允许的跃迁能,得出Mo—Mo四重键均裂时所需的能量大小依次为键σ>π>>δ。对于Mo_2Cl_8~(4-)簇合物态~1A_(1g)→1~1A_(2u)(δ→δ~*)和~1A_(1g)→2~1E_g(π→δ~*)的电子跃迁能,理论值(15584和22587cm~(-1))与低温时测得光谱实验值(18083和22000cm~(-1))较为接近。此外,本文还提出了簇合物Mo_2X_8~(4-)的态相同而X不同时,电子跃迁能变化,主要决定于参与电子转移过程的分子轨道组成成份的看法。     

氯化钠在球形纳米氧化铈形成过程中的作用

以水合碳酸铈为原料, 以氯化钠作为助磨剂和阻聚剂, 采用机械活化法制备了球形纳米氧化铈, 用XRD法研究了水合碳酸铈与氯化钠质量比、球磨时间、煅烧温度对CeO2粉体晶粒度的影响, 用TEM对最终产物粒子进行形貌观察. 结果表明: 在碳酸铈的球磨过程及其随后的煅烧过程中, 氯化钠的存在起到了很好的助磨和阻聚作用, 所得CeO2为类球形粒子, 分散性较好, 晶粒度约为30～50 nm.     

WHOLLY-AROMATIC THERMOTROPIC LIQUID CRYSTALLINE POLYMER AND ITS BLOCK COPOLYMER

A wholly-aromatic thermotropic liquid crystalline polymer (WATLCP) composed ofp-hydroxybenzoic acid (HBA), 4,4'-dihydroxy bisphenyl (BP), terephthalic acid (TPA),m-phthalic acid (MPA) was synthesized. It was symbolized by BP-LCP. Using a simi-lar method, a new copolymer BP-PSF was prepared. BP-PSF has a semi-flexible chainpolysulfone and a rigid-rod chain like BP-LCP. By FT-IR, polarizing microscope and DSCtechnique, the structures and properties of BP-LCP and BP-PSF were studied.     

（η^2—C60）[Pt（PPh3）2]8的合成与表征

C60是高度共轭的宠状结构碳素体．分子结构中六元环间的共价碳碳双键是富电子区，其反应性能与烯键类似，以碳碳双键与中心金属形成η2配位化合物．富勒烯η2配合物的合成及性能研究是当前研究热点之一[1~7]．本文在（η2-C60）［Pt（PPh3）2］n（n=1～6）系列研究[7]的基础上制备了（η2－C60）［Pt（PPh3）2］8，并用元素分析、红外光谱和光电子能谱进行鉴定和表征．1实验部分四（三苯基膦）合铂Pt（PPh3）4按文献[8]方法制备；C60纯度为99％；其余试剂均为分析纯．元素分析在ERLA－1106型元素分析仪上进行；光电子能谱在VGESCA…     

过渡金属乙酰丙酮螯合物的体积排除色谱研究

用定量体积排除色谱方法研究了过渡金属Fe(Ⅲ)、Co(Ⅲ)、Cu(Ⅱ)、Ni(Ⅱ)的乙酰丙酮螯合物在四氢呋喃溶液中的加合和缔合行为。在溶液中乙酰丙酮钴(Ⅲ)以单个螯合物分子的形式存在,乙酰丙酮铜(Ⅱ)和乙酰丙酮铁(Ⅲ)与溶剂加合生成加合物,乙酰丙酮铁(Ⅲ)除加合物外还存在缔合度为2-10的多分散缔合物,乙酰丙酮镍(Ⅱ)水合物在四氢呋喃中产生了加合交换作用,同时存在缔合度为6左右的缔合物。色谱数据给出了螯合物、加合物及缔合物     

Growth, Band Structure and Optical Properties of LiSrBO3 Crystal

The bulk crystal of LiSrBO3 (8.39 g) with a size of 21mm×20mm×15mm was grown by high temperature solution growth method. The relationship between growth habit and crystal structure was discussed. The transmission spectrum shows an UV absorption edge at about 300 nm. The melting temperature of this crystal was determined to be 942 ℃ by DTA-TG measurement. The band structure of the LiSrBO3 crystal was studied by means of the first principle method. An indirect band gap was found to be about 4.0 eV,and a low dielectric constant was estimated to be about 1.9 in terms of theoretical results.     

一种新的判断高分子相容性的粘度判据

依据最近提出的高分子稀溶液粘度的浓度 依赖性的团簇理论 ,对高分子‘理想混合物’的定义进行了更新的理论分析 .在此基础上提出了一个新的判定高分子相容性的粘度判据 .从现有的大量实验数据看 ,该判据是和事实相符合的     

水合醋酸铈直接热分解制备超细氧化铈及其抛光性能

Ultra fine ceria was prepared by calcining hydrate cerium acetate. The effects of pyrolysis temperature on the particle size, morphology, specific surface area and loose packing density of ceria were investigated, and the removal rate of optical glasses polishing by ceria was determined. The results show that with the increase of pyrolysis temperature, the loose deposit density and crystallinity increases and the specific surface area decreases, however, the particle size decreases firstly and then increases, the minimum medium particle size D₅₀ is 0.47 μm at pyrolysis temperature of 1 000 ℃. The SEM images of ceria prepared by the decomposition at 800 ℃ or at 1 100 ℃ show porous powders or quasi-sphere small particles with loosely agglomeration, respectively. It was found that the removal rate varied with pyrolysis temperature in preparation of ceria and the property of glass polished. The removal rate for three kinds of glasses was in the order of ZF7> F1> K9, and the maximum value appeared at around 1 000 ℃ for ZF7 and F1, and at around 1 100 ℃ for K9.