2—（4—氨酰基—2—噻唑基）—1,4—脱水—L—木糖醇及其氟代衍 …

用计算机分析模拟方法研究了２－（４－氨酰基－２－噻唑基）－１，４－脱水－Ｌ－木糖醇及其氟代衍生物的糖基构象，计算结果显示，６个碳核苷类似物的糖基构象均为Ｓ型。核磁共振谱和晶体Ｘ射线衍射结果与计算结果相吻合。     

水溶性光聚合引发剂研究进展

近几年发展起来的水溶性光聚合引发剂（ＷＳＰ）属自由基引发剂，按结构可分为芳酮类，稠环类烃类，聚硅烷类，酰基膦酸盐等，偶氮类及金属有机配合物类，本文综述了这些光引发剂的结构特性，光化学行为，光引发效率及光反应机理等。     

植物形成愈伤组织的激素调节与核酸及氨基酸代谢的关系

本文将绿豆子叶切段培养在Miller培养基上附加或不附加生长素和激动素,研究了受伤和激素诱导形成愈伤组织的作用.实验证明绿豆子叶切段必须有生长素和激动素才能形成愈伤组织.25S和18S的RNA明显增加。对照子叶切段比形成愈伤组织的切段中自由氨基酸的含量多,而结合氨基酸的情况相反.脯氨酸和羟脯氨酸的含量在两种组织中都是随着培养时间的延长而增加,但是形成愈伤组织的切段中羟脯氨酸和脯氨酸含量的比例却大大超过对照。     

几种矿物酸为流动相对HEH(EHP)萃取柱色谱分离稀土的影响

本文研究了以 HEH(EHP)为固定相,盐酸、硝酸、高氯酸和硫酸为流动相,萃取柱色谱法分离稀土元素.其平均分配系数为:■_(H_2SO_4)(3.87)>■_(HCl)(3.47)>■_(HClO_4)(3.44)>■_(HNO_3)(2.68).其分配系数的顺序为:HClO_4>H_2SO_4>HNO_3>HCl.因此,盐酸是较好的流动相.在盐酸洗脱液中加入1M 氯化铵,使 La、Ce、Pr、Nd 分离的洗脱体积减少近3/4.     

纳米金刚石粉酸处理前后性能结构的表征

自从1963年爆炸法合成纳米金刚石[1]以来,纳米金刚石已在科研和工业领域得以广泛应用.但是工业合成的纳米金刚石粉由于其工艺的限制存在一些杂质,其中主要包括纳米石墨、非晶碳和爆炸过程中产生的金属离子.因此,在实际科研工作前对纳米金刚石粉进行纯化处理就显得十分重要,以往的研究表明不同的处理方法各有利弊[2].在以下的研究中,我们采用盐酸消解的方法对商业购买的纳米金刚石粉进行纯化处理,通过对比纯化处理前后的IR、Raman以及ICP表征,分析讨论了酸处理方法的纯化效果.     

CrOx/ SBA-15介孔催化剂上丙烷在二氧化碳气氛中脱氢反应的研究

The structure and catalytic properties based on Chromium Oxide supported on mesoporous SBA-15 for oxidative dehydrogenation of propane by CO₂ have been studied by using X-ray diffraction (XRD), ultraviolet-visible diffuse reflectance spectra (UV-Vis DRS), electron spin resonance (ESR), X-ray photoelectron spectroscopy (XPS) and propane pulsing experiments in the absence of gas-phase O₂. It has been shown that propane conversion and propene yield increase with Cr loadings. The propane conversion and propene yield on CrO_x(Cr: 10wt%)/SBA-15 catalyst for oxidative dehydrogenation of propane by CO₂ at 550 ℃ reach 24.8% and 21.8%, respectively .The results of ESR, UV-Vis DRS and propane pulsing experiments indicate that Cr^Ⅲ in the CrO_x/ SBA-15 catalyst is the main active species in oxidative dehydrogenation of propane by CO₂ and Cr^Ⅵ, Cr^Ⅴ is inactive in dehydrogenation.     

SrTi0.9M0.1O3-δ钙钛矿型氧化物催化剂甲烷氧化偶联反应性能的研究

The structure and catalytic properties of SrTi_0.9M_0.1O_3-δ (M=Mg，Al， Zr) perovskite-type catalysts for ox-idative coupling of methane (OCM) have been studied by using X-ray diffraction (XRD)，X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption of oxygen(O₂-TPD) methods. It has been shown that doping the cations of lower valence (e.g. Mg²⁺， Al³⁺) to the B site of SrTi_0.9M_0.1O_3-δ perovskite-type catalysts results in the higher content of adsorbed oxygen species on the surface of catalysts and thus higher C₂-selectivity for OCM reaction. It is suggested that the oxygen vacancies of SrTi_0.9M_0.1O_3-δ (M=Mg， Al， Zr) perovskite-type catalysts are the sites responsible for oxygen activation， and the adsorbed oxygen species on the surface of SrTi_0.9M_0.1O_3-δ catalysts are the main active species for OCM reaction.     

天冬酰胺Schiff碱稀土配合物的合成、表征与抗O-·2性能

合成了天冬酰胺－邻香草醛Schiff碱稀土配合物，用元素分析，摩尔电导率，磁化率测定，差热分析，红外与紫外光谱，1H NMR谱等手段对配合物进行了组成与结构表征，并采用EPR技术对化合物的抗超氧阴离子自由基性能进行了探讨。     

Two-dimensional electron gas characteristics of InP-based high electron mobility transistor terahertz detector

The samples of In_xGa_(1-x)As/In_(0.52)Al_(0.48)As two-dimensional electron gas(2DEG)are grown by molecular beam epitaxy(MBE).In the sample preparation process,the In content and spacer layer thickness are changed and two kinds of methods,i.e.,contrast body doping andδ-doping are used.The samples are analyzed by the Hall measurements at 300 Kand 77 K.The In_xGa_(1-x)As/In_(0.52)Al_(0.48)As 2DEG channel structures with mobilities as high as 10289 cm~2/V·s(300 K)and42040 cm~2/V·s(77 K)are obtained,and the values of carrier concentration(Nc)are 3.465×10~(12)/cm~2and 2.502×10~(12)/cm~2,respectively.The THz response rates of In P-based high electron mobility transistor(HEMT)structures with different gate lengths at 300 K and 77 K temperatures are calculated based on the shallow water wave instability theory.The results provide a reference for the research and preparation of In P-based HEMT THz detectors.     

Experimental demonstration of underwater optical wireless power transfer using a laser diode

We experimentally demonstrate an underwater optical wireless power transfer(OWPT) using a laser diode(LD)as a power transmitter. We investigate the characteristics of a solar cell and a photodiode(PD) as a power receiver. We optimize the LD, the PD, and the solar cell to achieve the maximum transfer efficiency. The maximum transfer efficiency of the back-to-back OWPT is measured as 4.3% with the PD receiver. Subsequently, we demonstrate the OWPT in tap and sea water. Our result shows an attenuation of 3 dB/m in sea water.