分散支撑液膜中金属镍(Ⅱ)的迁移研究

研究了以聚偏氟乙烯膜(PVDF)为支撑体,煤油为膜溶剂,有机膦酸为流动载体的分散支撑液膜(DSLM)中金属Ni(Ⅱ)的传输行为;考察了载体种类、料液相pH、Ni(Ⅱ)起始浓度、分散相中H2SO4浓度以及膜溶液与H2SO4溶液体积比对Ni(Ⅱ)传输的影响,并对该体系富集、传输Ni(Ⅱ)的最佳条件进行了讨论;从界面化学和扩散传质角度提出了Ni(Ⅱ)在DSLM中传质动力学方程,采用直线斜率法对扩散层厚度以及金属离子在膜内的扩散系数进行了计算.     

Tunable structural color of anodic tantalum oxide films

Tantalum(Ta) oxide films with tunable structural color were fabricated easily using anodic oxidation.The structure,components,and surface valence states of the oxide films were investigated by using gazing incidence X-ray diffractometry,X-ray photoelectron microscopy,and surface analytical techniques.Their thickness and optical properties were studied by using spectroscopic ellipsometry and total reflectance spectrum.Color was accurately defined using L*a*b* scale.The thickness of compact Ta2O5 films was linearly dependent on anodizing voltage.The film color was tunable by adjusting the anodic voltage.The difference in color appearance resulted from the interference behavior between the interfaces of air-oxide and oxide-metal.     

带有非吸收窗口的高性能InGaAs/AlGaAs量子阱激光二极管

为了解决限制近红外单发射区InGaAs/AlGaAs量子阱半导体激光二极管失效阈值功率提升的腔面光学灾变损伤问题,研制了一种带有Si杂质诱导量子阱混杂非吸收窗口的新型激光二极管,并对其性能进行了测试分析.首先,对于带有非吸收窗口的二极管,在其谐振腔上方前后腔面附近的窗口区域覆盖50 nm Si/100 nm SiO2组...     

三波长合束单管激光器光纤耦合模块设计

为了研究以单管半导体激光器为基本单元的高功率、高亮度波长合束光纤耦合模块,设计出新型光纤激光器泵浦模块,基于ZEMAX光学设计软件等设计了一种由30支单管半导体激光器组成、可输出3种波长光束的光纤耦合模块。将经快慢轴整形、空间合束、波长合束、光路转向及聚焦的光束耦合进入芯径105μm、数值孔径0.22的普通光纤,最终得到尾纤输出端高于357.91 W的输出功率,光纤耦合效率为99.42%,光功率密度为27.24 MW/cm~2-stras。为了验证模块的实际操作的可行性,分析了光纤端面法线与入射光束之间的夹角对耦合效率的影响,结果显示该夹角对模块的耦合效率影响较小。同时,应用ANSYS软件对模块散热情况的分析结果可知,模块散热性能良好。故该模块各项性能良好,可靠性较高,实现了高功率、高亮度、多波长的多单管半导体激光器光纤耦合模块的设计目的。     

光子晶体微纳传感技术的理论与实验研究进展

光子晶体(PC)微纳传感器具有体积小、易集成、响应时间快、控光能力强、可实现无标签检测以及设计灵活等优点,在工业生产、海洋探测、生物医疗检测及环境监测等领域展现出巨大的应用前景。针对基于一维纳米束PC与二维平板PC的微纳光子传感技术,从传感器结构设计和传感性能提升方面,分析了当前国内外PC微纳传感的关键理论和实验技术进展,并通过对比分析,探讨了PC微纳传感技术在未来应用中所面临的挑战及未来发展的趋势。     

A new ellipse fitting method of the minimum differential-mode noise in the atom interference gravimeter

Ellipse fitting is a useful tool to obtain the differential signal of two atom interference gravimeters. The quality standard of ellipse fitting should be the deviation between the true phase and the fitting phase of the interference fringe. In this paper, we present a new algorithm to fit the ellipse. The algorithm is to minimize the differential noise of two interference gravimeters and obtain a more accurate value of the gravity gradient. We have theoretically derived the expression of the differential-mode noise and implemented the ellipse fitting in the program. This new algorithm is also compared with the classical methods.     

Nanoforest-like CdS/TiO_2 heterostructure composites:Synthesis and photoelectrochemical application

In this study, TiO_2 nanoforest films consisting of nanotubes have been synthesized by a simple hydrothermal method and a subsequent sintering technique. The hydrothermal reaction time is important for the controlling of the nanotube diameter and the specific surface area of holistic TiO_2 films. When the hydrothermal process reaction time is up to 8 hours,the diameter of the nanotube is about 10 nm, and the specific surface area of TiO_2 nanoforest films reaches the maximum.CdS nanoparticles are synthesized on TiO_2 nanoforest films by the successive ionic layer adsorption and reaction(SILAR)technique. The transmission electron microscope(TEM) and energy dispersive x-ray spectroscopy(EDX) mapping results verify that TiO_2/CdS heterostructures are realized. A significant red-shift of the absorption edge from 380 nm to 540 nm can be observed after the pure TiO_2 film is sensitized by CdS nanoparticles. Under irradiation of light, the current density of the optimal TiO_2/CdS photoanode is 2.30 mA·cm-2 at 0 V relative to the saturated calomel electrode(SCE), which is 6 times stronger than that of the pure TiO_2 photoanode. This study suggests that the TiO_2 nanoforest consisting of interlinked pony-size nanotubes is a promising nanostructure for photoelectrochemical.     

表面解吸常压化学电离质谱原位检测萝卜中芥子碱及其含量衰减

采用表面解吸常压化学电离串联质谱（SDAPCI-MSn）技术,直接检测了白萝卜中的芥子碱,并考察了不同环境下芥子碱的衰减规律。 结果表明,常温下（25 ℃）白萝卜中的芥子碱浓度随时间迅速下降,在短时间衰减到一定程度后趋于平稳。 在低温下（≤4 ℃）,白萝卜中的芥子碱衰减速度则非常缓慢,有利于保持白萝卜中芥子碱水平。 萝卜鲜汁中的芥子碱在接触空气后的衰减速度是日常存储条件下的300多倍。 虽然在不同的条件下,芥子碱衰减的速度不同,但均符合一级反应的衰减规律。     

一种基于模态域波束形成的水平阵被动目标深度估计

水面水下目标分辨与识别一直是被动声呐探测领域的难题.利用一种水平阵模态域波束形成算法获得己知方位目标声源的各阶模态强度,将其与不同深度的各阶参考模态强度进行匹配,最终实现了对声源的深度估计.仿真结果表明,该算法可以在信噪比为-10 dB的情况下,用300Hz带宽的信号样本,实现对声源深度的有效估计.系统分析了不同参数和不同波导条件对该方法目标深度估计性能的影响.其中,阵元数越多,模态样本数越多,计算频段越宽,方位估计精度越高,有效阵长越长,深度估计的性能越好.阵元间距和波导深度的变化不会影响该方法的深度估计性能,并且该方法的深度估计性能在声速剖面、海底参数等波导条件存在扰动时具有鲁棒性.     

基于光栅应变传感器的纳米测量机探针设计

为了提高纳米坐标测量机探针的测量精度,且能满足对复杂曲面或微结构进行精确测量的要求,提出了一种新颖的基于微探针系统的光纤布拉格光栅(FBG)探针。该探针具有较高灵敏度和可重复性。提出该新型FBG探针,即探针里有一个熔融的球形顶端,FBG作为应变传感器内置在测杆上。介绍了光纤探针的基本原理,并利用有限元软件ANSYS 11对探针的应变分布在轴向和横向载荷两种典型配置分别进行了仿真分析,结果表明仿真分析和理论计算相吻合。通过实验对光纤探针的灵敏度和分辨率分别进行测试。实验结果表明,在轴向载荷条件下,用位移分辨率为1.5 nm的压电换能器对探针进行性能测试,得到光纤探针的测量分辨率为60 nm。即光纤探针具有较高的灵敏度和分辨率,其性能满足实际测量需要。