A New Type of Terahertz Waveguides

A new type of THz waveguides, which employs a solid polyethylene rod as the core and polyethylene tubes in a periodic array of square lattice as the cladding, is proposed. Optical properties of this new THz waveguide, especially in dispersion, confinement loss and single mode property, are investigated in detail with the plane wave expansion method and the beam propagation method. Numerical results demonstrate that the new THz waveguide can reach not only low dispersion but also low confinement loss at single mode propagation. Therefore, the square lattice structure is a better candidate as THz waveguides than the triangular ones.     

8β-hydroxyeremophil-7(11)-ene-12,8α(4β,6α)-diolide分子的晶体结构

运用层析法、结晶法从狭苞橐吾全草中分离得到艾里莫芬烷型倍半萜8β-hydroxyeremophil-7(11)-ene-12,8α(4β,6α)-diolide化合物,并通过质谱、核磁共振氢谱和碳谱、氢核-氢核相关谱、异核多量子相干谱和异核多键相干谱进行结构鉴定．其单晶经X射线衍射测试表明,其晶体属正交晶系,空间群为P212121,晶胞参数为: a=6．8519(5),b=10．7191(8),c=18．5942(14)A,V=1365．67(18) A3,Z=4,Dc=1．354 mg／m3．F(000)=592,μ=0．101 mm-1     

一类含时滞的反应扩散方程的周期解和概周期解

本文研究一类含时滞的反应扩散方程和方程组.应用单调方法得到了这类方程存在周期解和概周期解一些充分条件.     

N-1,1''''-(3,3''''-二羧基-4,4''''-联苯撑)-双-(3-N-羟基-3-N-苯基三氮烯)的合成、结构表征及对钼(Ⅵ)的显色反应

1引言 近年来,利用构效关系寻找特效试剂已成为国内外研究的热门课题.改变物质的组成和结构是寻找高灵敏度、高选择性试剂的重要途径.N-1,1'-(3,3'-二羧基-4,4'-联苯撑)-双-(3-N-羟基-3-N-苯基三氮烯),是目前报道的对镍、铜灵敏度最高的显色剂,常用于镍、铜离子的定性检测.由于该物质的水溶性不好,不能在光度分析上应用.本文介绍在联苯苯环对应的3C位置中分别引入羧基双偶氮化后,再与苯基羟胺反应,合成NCPHPA.由于在一分子中增加两个羧基,不仅使试剂的溶解性有很大的提高,且对钼表现出很强的选择性和很高的显色灵敏度.本文介绍NCPHPA的合成方法,并用紫外吸收光谱、红外吸收光谱、核磁共振波谱、质谱等方法论证了产物的结构.简述了NCPHPA在光度分析中性能.将NCPHPA应用于光度法测定痕量钼,E4566达3.52×106 L·mol-1·cm-1,较文献报道钼的高灵敏显色反应,εmax提高了15倍,重现性亦较满意,用于痕量钼的测定,结果与AAS法一致.     

线状锗等离子体X射线线谱的时间分辨测量

用自行研制的X射线条纹晶体谱仪首次测量了线状锗等离子体的X射线时间分辨谱。给出了类Ne-锗L线共振线的时间演化过程,并用类Ne-锗L线共振线与其双电子俘获伴线的相对强度比粗估了锗等离子体的电子温度及其随时间的变化,实验给出了X光激光增益区介质的电子温度为400～760eV,同时给出了电子温度保持相对恒定的时间不小于90ps(电子温度变化小于2％)。     

HPLC-MS/MS技术在中华绒螯蟹硝基呋喃类代谢物残留量检测中的应用

建立了中华绒螯蟹中硝基呋喃类代谢物残留量的液相色谱-串联质谱检测方法.取均质后的中华绒螯蟹可食部分样品,用盐酸水解组织中蛋白结合代谢物,经2-硝基苯甲醛37℃过夜衍生化,调节pH值至约7.0～7.4后,用乙酸乙酯提取,正己烷净化.选用电喷雾离子源,在正离子、多反应监测方式模式下进行定性,以同位素内标法进行定量.方法的检出限为0.5 μg·kg-1,工作曲线的线性范围为1.25～50.0 μg·L-1.在添加浓度为0.5～10.0 μg·kg-1的范围内,AMOZ、SEM、AHD和AOZ的回收率分别在92.8%～106%、84.5%～94.6%、80.6%～98.6%和88.4%～105%之间,相对标准偏差均小于10%.     

n次乘、开方去9余数验算法

求相同因数乘积的运算叫做乘方;求一个数方根的运算叫做开方。乘方与开方运算可用珠算,亦可用笔算,但运算过程比较烦琐,稍不当心就容易出错,因此答数需要检查,而检查的方式往往复算,甚至多次复算,这是非常乏味的。现介绍一种简捷的"去9余数验算法",不论是多少次乘、开方运算,只要按此法验算,     

Formation of Interfacial Layers in LaAlO3/Silicon during Film Deposition

We have studied the interracial reactions between amorphous LaAlO3 thin films and Si substrates, using high- resolution transmission electron microscopy and x-ray photoelectron spectroscopy. It has been shown that the interracial layer between LaAlO3 film and Si substrate chemical states show that the ratio of La 4d3/2 to Al 2p is SiLaxAlyOz. The depth distributions of La, Si and Al of the interfacial layer remains unchanged with the depth compared to that of the LaAlO3 film. Moreover, the Si content, in the interracial layer gradually decreases with increasing thickness of the interracial layer. These results strongly suggest that the Al element is not deficient in the interracial layer, as previously believed, and the formation of a SiLaxAlyOz interracial layer is mainly due to the diffusion of Si from the substrate during the LaAlO3 film deposition. With the understanding of the interracial layer formation, ones can control the interface characteristics to ensure the desired performances of devices using high-k oxides as gate dielectrics.     

光纤探头式分光光度计在丙酮碘化反应动力学研究中的应用

丙酮的碘化反应——作为复杂反应的一个例子,是研究化学反应动力学时常被选用的一个物理化学实验。在该实验中,常用72型分光光度计通过间歇取样的方法,测出不同反应时刻反应物碘的浓度,经作图计算求得反应的速度常数。显然这种方法既费时又麻烦,且误差也较大。近几年来,光纤传感器的出现为我们提供了一种快速简便,可连续进行测量的分析     

An Electro—Optical Modulator Based on GeO2—Doped Silica Ridge Waveguides with Thermal Poling

A Mach-Zehnder electro-optic modulator is designed and fabricated based on upper-clad GeO2-doped silica ridge waveguides with thermal poling.The electro-optic coefficient obtained is about 0.05pm/V and is polarizationinsensitive.An extinction ratio of over 17dB is achieved.The transmission loss of the modulator for the TE mode is 2-3dB higher than that for the TM mode after the poling.