金属卟啉对环己烷定向氧化的催化作用

关于以金属卟啉为催化剂的烷烃的模拟生物氧化研究,虽有零星报道,但还缺少系统的研究.我们根据生物氧化的一般原理,研究了金属卟啉对环己烷定向氧化的催化作用.我们利用分子氧-抗坏血酸-金属卟啉-环己烷模拟生物氧化体系,于常温常压下实现了环己烷被氧化成环己醇和环己酮的反应,反应中无其他氧化产物生成.血晶(氯化高铁血红素)和合成的四苯基卟啉的Fe,Co,Mn络合物有催化活性,其中以血晶最好. 血晶按文献[4]提取.中位四苯基卟啉(TPP)按Adler法合成.TPP的Fe,Co,Mn及Cu络合物用Rothemund法制备.这些化合物及其纯度分别用紫外光谱、红外光谱和     

金属四苯基卟啉-次氯酸钠模拟体系中芳醛氧化反应的研究

研究了以次氯酸钠为氧化剂在两相条件下芳香醛氧化反应中锰(III)-卟啉的催化性质, 在TPPMn(III)醋酸盐, TPPFe(III)氯化物, TPPCo(II)和TPPNi(II)催化剂中(四苯基卟啉, TPP), 前二个化合物呈现催化活性, 研究表明, OXO-金属卟啉的形成是反应的关键步骤。     

氯离子存在下四苯基卟啉合锰的电化学和现场光谱电化学 I: 还原过程

在二氯乙烷溶液中,研究了氯离子存在下四苯基卟啉合锰,(TPP)Mn(III)ClO~4,各步电极氧化还原的过程机理,证明了Mn(II),Mn(III)中心都只有一个Cl^-配位,其结果使锰卟啉中心金属Mn(III)/Mn(II)的半波电位负和多约100mV,测定了Cl^-与Mn(III)中心的配位反应的平衡常数为2.2×10^4.     

金属卟啉/MgAl水滑石催化醇选择性氧化制备羰基化合物

将MgAl水滑石引入到金属四苯基卟啉(MTPPs,M=Co,Fe,Mn,Ni)催化氧化体系中,实现了醇的选择性氧化。 结果表明,在分子氧/异丁醛体系中,CoTPP在苯甲醇氧化制苯甲醛反应中表现出优异的催化活性,MgAl水滑石添加剂可有效地提高醛的选择性。 在苯甲醇1 mmol、乙腈2 mL、CoTPP 5 mg、MgAl水滑石18 mg、异丁醛5 mmol、反应温度60 ℃、氧气气氛下反应2 h,苯甲醇的转化率和苯甲醛的选择性分别达到94%和92%。 另外,此催化体系在其它醇类化合物的氧化反应中也具有较好催化活性。     

氧化碘苯间氨基苯甲酸锰(IV)四苯基卟啉配合物的合成

高价锰卟啉配合物在温和条件下分解水,释放氧,是植物光体体II的可能模型化合物.我们选择间氨基苯甲酸作为轴向配体,在二氯甲烷中用氧化碘苯氧化H2NC6H4COOMn(III)TPP相似文献   

四（烷硫基苯基）卟啉及其金属配合物的合成

某些人工合成的金属卟啉,由于其活化分子氧的功能,被广泛用作生物模拟氧化反应中的催化剂。金属四苯基卟啉及其衍生物是用得最普遍的模型化合物。文献中巳报道过各种四苯基卟啉衍生物的合成方法,但尚未见带烷硫基的四苯基卟啉衍生物的系统合成方法。本文报道这类四苯基卟啉衍生物及其金属配合物的合成。 本文采用通常的一步法合成四苯基卟啉衍生物,即首先参照文献方法合成烷硫基苯甲     

锰卟啉一次氯酸钠模拟体系中由芳醛制备相应羧酸

我们前文报道了在金属卟啉-次氯酸钠模拟体系中氧化苯甲醛时,金属卟啉结构与其催化性能的关系,结果表明:四(2.6-二氯)苯基卟啉合锰是稳定性能最好及活性较高的催化剂。本文进一步报道各种因素对反应的影响,并在此基础上提出了由芳醛合成相     

金属卟啉及其与咪唑络合物的电喷雾质谱研究

利用电喷雾电离质谱（ESI－MS）研究了3种金属卟啉化合物（MTPP＝MnTPP,TeTPP和CoTPP）,探讨了在这些化合物中苯取代基与卟啉环间的键合能力以及金属卟啉与咪唑的配位情况。研究结果表明,金属卟啉的外围取代基苯基与卟啉环的键合能力按Mn、Fe和Co的次序变弱。金属卟啉与咪唑形成的络合物的离子丰度随配体浓度的增加而增强;在相同的配体浓度下,络合物的离子丰度按Mn、Fe和Co顺序依次增加,其中,CoTPP络合物的稳定性最强。     

5-(4-丙氨酸丁氧苯基)-10,15,20-三苯基卟啉及其配合物的合成和性质

本文首次合成了一种新型的单取代的丙氨酸四苯基卟啉，５－（４－丙氨酸丁氧苯基）－１０，１５，２０－三苯基卟啉（Ｈ２Ｌ），及其Ｃｏ（Ⅱ）、Ｃｕ（Ⅱ）、Ｚｎ（Ⅱ）配合物（ＣｏＬ、ＣｕＬ、ＺｎＬ），用元素分析、电子光谱、红外光谱、荧光光谱和激光拉曼光谱进行表征。研究了ＭＬ存在下，用氧气氧化芳醛的过程，测定了反应体系的吸氧动力学曲线，研究了氧化过程金属卟啉可见光谱变化以及底物和金属卟啉浓度对反应的影响。结果表明，ＣｏＬ能加速芳醛氧化反应，最大吸氧速率随ＣｏＬ浓度的增加而增大，但反应诱导期随ＣｏＬ浓度增大而延长。     

锰卟啉一次氯酸钠模拟体系中由芳醛制备相应羧酸

前文报道了在金属卟啉-次氯酸钠模拟体系中氧化苯甲醛时,金属卟啉结构与其催化性能的关系,结果表明:四(2.6-二氯)苯基卟啉合锰是稳定性能最好及活性较高的催化剂。本文进一步报道各种因素对反应的影响,并在此基础上提出了由芳醛合成相应羧酸的新方法。     

Determination of Singlet Oxygen Production and Antibacterial Effect of Nonpolar Porphyrins In Heterogeneous Systems

ABSTRACT

The possibility of using the iodide method and the method of bleaching of 4-nitroso-N, N'-dimethylaniline, developed originally for homogeneous aqueous medium for the determination of singlet oxygen production, was tested for water-insoluble nonpolar senzitizers adsorbed on the silica gel support. Sensitizers of the porphyrin and metalloporphyrin type (tetraphenylporphin (TPP), protoporphyrin IX (PPIX), tetra(4-nitrophenyl)porphin (TPP(NO₂)₄ and complexes of TPP with some divalent and trivalent metals, Cd(II)TPP, Zn(II)TPP, Co(II)TPP, Cu(II)TPP, Ni(II)TPP, Mn(II)TPPCI, and Fe(II)TPPCl) were used as model compounds. It was found that both methods used gave similar values of ¹O₂. The relative ¹O₂ production of the compounds studied decreases in the order PP=Zn(II)TPP=Cd(II)TPP > TPP(NO₂)₄> PPIX> nonactive substances.

The cytotoxic effect of ¹O₂ Produced by these substances on the silica gel support was tested using E. coli DHS-alfa bacteria. The relative ¹O₂ production values correlate with the antibacterial activity of the adsorbed substances exposed to light.     

Studies on catalytic fluorescence formation with peroxidase-like metallotetrakis(N-methylpyridiniumyl) porphyrins

The relative ability of peroxidase-like metallotetrakis(N-methylpyridiniumyl)porphyrins [Me-TMPyP, Me = Mn(III), Fe(III), Co(III), Ni(II), Cu(II), and Zn(II)] to catalyse the hydrogen peroxide oxidation of homovanillic acid to a fluorescent dimer has been studied. The complexes of Mn, Fe and Co are effective catalysts in the reaction, but the complexes of Ni, Cu and Zn are not. The catalytic behaviour of Mn-TMPyP, Fe-TMPyP and Co-TMPyP has been compared with that of HRP in both enzymatic and kinetic analysis. The sequence of peroxidase-like catalytic activity is Mn-TMPyP> Co-TMPyP> Fe-TMPyP. The catalytic activity of Mn-TMPyP is 84% of that of HRP. These Me-TMPyP (Me = Mn, Fe, and Co) compounds are good substitutes for HRP in enzymatic analysis. Traces of hydrogen peroxide and glucose can be determined with the Me-TMPyP systems.     

Electrocatalytic Reduction of Oxygen at Glassy Carbon Electrodes Coated with Diazonium‐derived Porphyrin/Metalloporphyrin Films

In this study, the influence of the film structure was investigated on the electrocatalytic oxygen reduction at GC electrodes covered with porphyrin and metalloporphyrin rings via the diazonium modification method. For that purpose, primarily, tetraphenylporphyrin (TPP) films on GC electrode surfaces were prepared by electroreduction of in situ generated diazonium salts of 5‐(4‐aminophenyl)‐10,15,20‐triphenylporphyrin (APP) and 5,10,15,20‐tetrakis(4‐aminophenyl)porphyrin (TAPP) molecules. Next, the formation of metalloporphyrin films on the modified surfaces was accomplished through the complexation reactions of surface porphyrin rings with metal ions in the salt solutions containing Mn(II), Fe(III) and Co(II) ions. The resulting porphyrin and metalloporphyrin layers were identified with XPS and ICP‐MS. The electrochemical barrier properties of the films on GC surfaces were examined by cyclic voltammetry in K₃Fe(CN)₆ aqueous solution. The electrocatalytic abilities of the resulting films were also investigated for the oxygen electrochemical reduction by employing cyclic voltammetry in PBS solutions saturated with oxygen. The results showed that the oxygen reduction potentials on modified GC electrodes were shifted to less negative potentials compared to that of bare GC electrode. Also, it was obtained that the oxygen reduction reaction was more effective on the GC electrodes modified with TPP rings by using TAPP molecules than those prepared by using APP molecules.     

Organic acid solutions in the chromatography of inorganic ions VIII. Cation-exchange of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media

Summary The cation-exchange behaviour of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media at various concentrations and pH, was studied with Dowex 50 WX8 resin (200–400 mesh) in the ammonium form. Separation of Fe(III)/Cu(II), Fe(III)/Cu(II)/Zn(II), Fe(III)/Co(II)/Mn(II), Cu(II)/Ni(II)/Mn(II), Fe(III)/Cu(II)/Co(II)/Mn(II), Fe(III)/Cu(II)/Ni(II)/Cd(II), Yb(III)/Eu(III), Sc(III)/Y(III),Sc(III)/Yb(III)/Dy(III) and Nb(V)/Yb(III)/Ho(III) has been achieved, among others.This work was supported by C.N.R. of Italy.     

单取代色氨酸四苯基卟啉及其配合物的合成、结构表征及催化性质研究

模拟细胞色素 P- 4 5 0的活性中心金属卟啉及周围氨基酸残基的结构 ,研究以其共轭大 π电子体系和中心金属原子价改变为基础的金属卟啉的氧化还原性质 ,以及中心金属对轴向配体的配位能力是当前人们感兴趣的课题[1 ] 。本文报道了 5 - [(对 - N-色氨酸丁氧基 )苯基 ]- 10 -15 - 2 0 -三 (对氯苯基 )卟啉及其铁、钴、锰配合物的合成、结构表征和对芳醛的催化氧化行为。实　验　部　分合成1.色氨酸四苯基卟啉 (H2 L )的合成 :　按文献 [2 ]先合成单对羟基卟啉 (收率 4 .2 % ) ,再与1,4二溴丁烷反应得单对溴丁氧基四苯基卟啉 (收率 6 0 % ) ,…     

the extraction of some metallic bromides from aqueous solutions with methyl ethyl ketone and methyl iso-butyl ketone

The extraction of the following metals from aqueous solutions containing excess bromide with methyl ethyl ketone (MEK), and methyl isobutyl ketone MIBK has been investigated:—Cu(I), Cu(II), Zn(II), Ni(II), Co(II), Fe(II), Fe(III), Al(III), Mn(II), Sn(II) and Sn(IV). The use of MEK was found to be strictly limited by its solubility in acidic aqueous solutions. Determinations of the formulae of the extracted compounds were attempted in two cases but were found to be not wholly satisfactory and were discontinued. An interesting reaction between the cupric bromide complex and the solvents was noticed. Separations of Fe(IIl) from Mn(II), Fe(III) from Al(III), Fe(III) from Co(Il) and Fe(III) from Ni(II) could be achieved under suitable conditions.     

1,1'-二(N-水杨酰腙乙基 )二茂铁及其过渡金属(Ⅱ)的配合物

本文合成了1,1'-二(N-水杨酰腙乙基)二茂铁及其过渡金属配合物,ML.nH~2O[M=Mn(II)、Co(II)、Ni(II)、Cu(II)、Zn(II)和Cd(II)],并用元素分析、UV、IR、^1HNMR、TG-DTA和摩尔电导进行了表征.配体以烯醇式以通过亚胺基氮原子和酰胺基氧负离子与金属离子配位,按摩尔比1:1结合.Ni(II)配合物有一分子DMF配位.大部分配合物比配体热稳定性高.     

Synthesis and characterization of some pyrimidine, purine, amino acid and mixed ligand complexes

Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) complexes of barbital, thiouracil, adenine, amino acids (methionine, lysine and alanine) and some mixed ligands were prepared and characterized by elemental analyses, IR, electronic spectra, magnetic susceptibility and ESR spectra. Coordination of the metallic centre to the oxygen and nitrogen atoms of barbital, thiouracil, amino acids and coordinate to amino group and nitrogen atom of adenine occurred. Electronic spectra and magnetic susceptibility measurements were utilized to infer the structure of the complexes which are octahedral for Mn(II), Fe(III), Co(II), Ni(II) and Cd(II) and tetrahedral for Mn(II), Cu(II), Zn(II) complexes. ESR spectra were observed for copper complexes with a d(x2)-(y2) ground state with small g(||) values indicating strong interaction between the ligands and their metal ions.     

Capillary gas chromatographic analysis of pyrrolidinedithiocarbamate metal chelates

Pyrrolidinedithiocarbamate (PDTC) chelates of Zn(II), Cu(II), Ni(II), Co(III), Fe(III), Mn(II), Cr(III), and VO(II) were analysed by capillary GC on a DB-1701 column (30 m x 0.25 mm id) with flame ionisation detection (FID). Linear calibrations were attained within "1-30 microg/mL" for Ni(II), Fe(III), Mn(II), Cr(III), Cu(II), and VO(II), and within "2-50 microg/mL" for Co(III) and Zn(II). The limits of detection were in the "150-500 ng/mL" range, corresponding to 15-50 pg amounts reaching the FID system. The optimised method was applied to the determination of Cu(II) and Ni(II) in coins, and that of Zn(II), Cu(II), Ni(II), Fe(III), Mn(II), Cr(III), and VO(II) in pharmaceutical preparations with relative standard deviations within 1.1-5.2%. The results obtained are in good agreement with sewage water samples and the declared values for the pharmaceutical formulations, or with the results of AAS of metal contents in coins, pharmaceutical preparations, and sewage water samples.     

Nine non-symmetric pyrazine-pyridine imide-based complexes: reversible redox and isolation of [M(II/III)(pypzca)2](0/+) when M = Co, Fe

The non-symmetric imide ligand Hpypzca (N-(2-pyrazylcarbonyl)-2-pyridinecarboxamide) has been deliberately synthesised and used to produce nine first row transition metal complexes: [M(II)(pypzca)(2)], M = Zn, Cu, Ni, Co, Fe; [M(III)(pypzca)(2)]Y, M = Co and Y = BF(4), M = Fe and Y = ClO(4); [Cu(II)(pypzca)(H(2)O)(2)]BF(4), [Mn(II)(pypzca)(Cl)(2)]HNEt(3). These are the first deliberately prepared complexes of a non-symmetric imide ligand. X-ray crystal structures of [Cu(II)(pypzca)(2)]·H(2)O, [Co(II)(pypzca)(2)], [Co(III)(pypzca)(2)]BF(4), [Cu(II)(pypzca)(H(2)O)(2)]BF(4)·H(2)O and [Mn(II)(pypzca)Cl(2)]HNEt(3) show that each of the (pypzca)(-) ligands binds in a meridional fashion via the N(3) donors. In the first three complexes, two such ligands are bound such that the 'spare' pyrazine nitrogen atoms are positioned approximately orthogonally to one another and also to the imide oxygen atoms. In MeCN the [M(II/III)(pypzca)(2)](0/+) complexes, where M = Ni, Co or Fe, exhibit one reversible metal based M(II/III) process and two distinct, quasi-reversible ligand based reduction processes, the latter also observed for M(II) = Zn. [Mn(II)(pypzca)Cl(2)]HNEt(3) displays a quasi-reversible oxidation process in MeCN, along with several irreversible processes. Both copper(II) complexes show only irreversible processes. Variable temperature magnetic measurements show that [Fe(III)(pypzca)(2)]ClO(4) undergoes a gradual spin crossover from partially high spin at 298 K (3.00 BM) to fully low spin at 2 K (1.96 BM), and that [Co(II)(pypzca)(2)] remains high spin from 298 to 4 K. All of the complexes are weakly coloured, other than [Fe(II)(pypzca)(2)] which is dark purple and absorbs strongly in the visible region.