以四乙基氢氧化铵为模板并通过转晶法合成高硅铝比的SSZ⁃13沸石分子筛

使用四乙基氢氧化铵为有机模板剂,以低硅铝比(nSiO2/nAl2O3)的Y分子筛为铝源,通过转晶法制备结晶度良好的SSZ?13沸石分子筛。从凝胶配比方面考察了不同原料组成对分子筛合成的影响,并通过X射线衍射(XRD)、扫描电子显微镜(SEM)及电感耦合等离子体(ICP)表征水热反应过程中的物相、形貌、硅铝比等变化,揭示分子筛合成过程。氨选择性催化还原(NH3?SCR)反应显示该分子筛具有优异的催化活性,为其工业上的广泛应用提供了可能性。     

骨架富含Si(4Al)结构的SAPO-34分子筛的合成及其对甲醇制烯烃反应的催化性能

通过在初始凝胶中加入HF合成了骨架富含Si(4Al)配位结构的SAPO-34分子筛. 使用X射线衍射、扫描电镜、X射线荧光和核磁共振等表征手段研究了初始凝胶中HF的加入对合成SAPO-34分子筛的晶体结构、晶体形貌、元素组成以及骨架硅配位环境的影响. 结果表明,在初始凝胶中加入F离子后,合成的SAPO-34分子筛的晶体结构更加规整;随着初始凝胶中F离子含量的提高,合成的SAPO-34分子筛晶体骨架中Si(4Al)配位结构的数量增多, Si(nAl)(n=3～0)配位结构的数量减少. 将合成的SAPO-34分子筛催化剂用于甲醇制烯烃反应,结果显示, SAPO-34分子筛骨架中富含Si(4Al)配位结构可以有效提高反应产物中乙烯的选择性,同时能够延长催化剂的寿命.     

吡啶甲磺酸盐离子液体的固载化及其在聚甲醛二甲醚合成中的催化作用

采用键合法将吡啶甲磺酸盐离子液体负载在HZSM-5分子筛上,得到分子筛负载型离子液体催化剂,并将其用于聚甲醛二甲醚(PODEn)的合成。X射线衍射、红外光谱和N2吸附-脱附表征结果显示,吡啶甲磺酸盐离子液体较好地固载于分子筛上。用于催化合成PODEn时较适宜的反应条件为:离子液体负载量0.25 g、甲醇与三聚甲醛的物质的量比(即醇醛比)1.5、110℃、反应时间3 h,催化剂用量为总反应物质量的2.2%。缩合产物中柴油添加组分PODE3~8收率可达67.35%;与单纯离子液体或分子筛催化效果相比,PODE3~8收率得到提高。固载化离子液体易回收,可重复利用;当重复使用3次后,PODE3~8收率仍能达到45.62%。     

NaA分子筛膜催化剂上CO和C2H4混合气的选择性氧化反应

采用二次水热法,在Pt/Al2O3球形催化剂颗粒上合成了致密的NaA分子筛膜.分别以X射线衍射(XRD)和扫描电子显微镜(SEM)对制备的分子筛膜催化剂结构及形貌进行表征,结果显示经二次合成的Pt/Al2O3球形催化剂颗粒上均匀地覆盖一层致密、均一的NaA分子筛膜,膜的厚度约为20 μm.将合成的NaA分子筛膜催化剂用于CO和C2H4混合气氧化反应,考察了催化剂表面分子筛膜对反应物分子的选择性,在最优条件下,CO对C2H4的氧化反应选择性始终维持在96%.这种复合膜催化剂可用于选择性除去C2H4,原料气中的CO.     

离子热法合成AEL磷酸铝分子筛膜及其机理研究

以δ-氧化铝为基底和铝源, 使用离子热基底自转晶法, 在[EMIm]Br离子液体中合成了AEL磷酸铝分子筛膜. 采用X射线(XRD)和扫描电镜(SEM)等方法对所得的AEL分子筛膜进行了表征, 研究了合成条件对膜的影响. 研究发现在氢氟酸和磷酸离子液体混合溶液中一步反应可以合成c轴高度取向的AEL分子筛膜, 在氢氟酸和磷酸离子液体溶液中分别顺序两步反应可以合成无取向的AEL分子筛膜. 离子热基底自转晶法分子筛膜的形成符合固相转化机理, 氟离子可以促进分子筛膜的生长, 并影响分子筛膜的取向.     

离子热法合成多级孔CuAPO-5分子筛

采用丁二酸、氯化胆碱与四乙基溴化铵三元低共熔体为溶剂和模板剂,借助微波辐射快速合成了具有多级孔结构的CuAPO-5分子筛。系统地考察了P2O5/Al2O3、HF/Al2O3与Cu O/Al2O3的物质量之比,铝源及铜源对CuAPO-5分子筛合成的影响。利用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和N2物理吸脱附等检测手段对合成产物的结晶度、形貌和孔结构等进行了表征。通过SEM可知在一定的条件下,可得到具有六角纳米盘状特殊形貌的CuAPO-5分子筛。N2物理吸脱附、SEM和TEM分析表明该分子筛是一种同时存在微孔和介孔的多级孔磷酸铝分子筛材料。     

异相晶种诱导快速合成低硅菱沸石分子筛

在不含有机模板剂体系(OSDAs)中,利用异相晶种(T型分子筛)诱导快速合成出纯相的低硅菱沸石分子筛。采用XRD、SEM、TEM、27Al MAS NMR和紫外拉曼等手段表征分子筛的结构属性和形貌特点。详细研究了菱沸石分子筛的晶化过程以及晶种添加量、nAl2O3/nSi O2、nH2O/nSiO2和碱度对菱沸石分子筛晶化的影响,并探讨T型分子筛晶种诱导合成菱沸石分子筛的晶化机理。原位合成体系中仅形成L型分子筛晶相,而一定量T型分子筛异相晶种的加入诱导溶胶快速制备出纯相的菱沸石分子筛。T型分子筛晶体在一定的水热条件下不断溶解而释放的六元环(6R)和四元环(4R)迅速形成菱沸石分子筛特征笼(CHA笼),抑制了L型分子筛特征单元和特征笼(不含四元环的CAN笼)的形成。     

两步变温法微米晶种诱导合成高性能的T型分子筛膜

在预涂自制微米晶种的多孔管状莫来石支撑体表面上,采用两步变温法诱导合成T型分子筛膜。在溶胶配比nSiO2∶nAl2O3∶nNa2O∶nK2O∶nH2O=1∶0.05∶0.3∶0.1∶30合成条件下,通过变温晶化过程成功制备出高性能的T型分子筛膜。XRD和SEM结果表明,该法可在支撑体表面上较快地形成一层连续致密的纯相T型分子筛膜层,较大缩短了膜合成时间和提高了膜致密性。在优化条件下所合成的膜具有优异的渗透汽化性能,且膜制备的重复性良好。75℃时,在水/异丙醇(10/90,w/w)混合物体系中膜的渗透通量和分离因子分别高达4.25 kg.m-2.h-1,7600;在水/乙醇(10/90,w/w)混合物体系中膜的渗透通量和分离因子分别为2.87 kg.m-2.h-1,1 900。     

无有机模板剂水热合成Co同晶取代的丝光沸石分子筛

在硅酸钠、硫酸铝、硝酸钴和氢氧化钠的全无机体系条件下, 采用无有机模板剂水热法合成了Co同晶取代的丝光沸石分子筛. 通过粉末X射线衍射(XRD)、扫描电子显微镜(SEM)、电感耦合等离子体(ICP)光谱、氮气吸附、紫外-可见(UV-Vis)光谱、热重(TG)分析等手段对所得固体产物的织构性质以及钴在分子筛中的存在状态进行了表征. 结果表明, 该方法成功地将Co离子引入到丝光沸石分子筛的骨架结构中, 未发现骨架外Co物种. 典型的合成条件为n(Co)/n(SiO₂) =0.01-0.04, n(SiO₂)/n(Al₂O₃) =20-50, n(H₂O)/n(SiO₂) =40, n(Na₂O)/n(SiO₂)=0.4, 晶化温度170 °C, 晶化时间3-7 d. 讨论了Na+离子在无有机模板剂合成中的结构导向作用. 全无机体系合成得到的产物无需进行传统的高温煅烧处理, 即可获得开放的微孔孔道, 实现了低成本、低能耗、环境友好的Co-丝光沸石的合成.     

高温离子热快速合成AlPO4-42分子筛

本文采用离子热合成法,以磷酸为磷源、异丙醇铝为铝源,在溴化1-丁基-3-甲基咪唑鎓([BMIM]Br)离子液体中于280℃快速合成了AlPO_4-42分子筛,并用该方法快速合成了其他类型的磷酸铝分子筛。通过X射线衍射、扫描电镜、比表面积孔隙率分析、固体核磁等表征手段研究了不同物料配比、模板剂、晶化时间对合成AlPO_4-42分子筛的影响以及AlPO_4-42分子筛的比表面积、孔容大小和孔道中的填充物。结果发现,在4min时已经形成了AlPO_4-42分子筛的结构。合成出的AlPO_4-42分子筛具有十四面体的形貌,这与采用常规方法得到的AlPO_4-42分子筛晶体的立方体形貌明显不同,而且AlPO_4-42分子筛的比表面积和孔容都有所改变。在合成AlPO_4-42分子筛的过程中离子液体和模板剂协同导向产物的形成。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.