奎宁功能化聚乙烯咪唑修饰硅胶亲水相互作用色谱固定相的制备及应用

通过表面自由基链转移聚合和亲核取代反应制备了一种新型奎宁功能化聚乙烯咪唑修饰硅胶亲水色谱固定相(Sil-PIm-Qn)。通过元素分析和红外光谱对该固定相进行表征,并在亲水相互作用色谱(HILIC)模式下对其进行了色谱性能评价。结果表明,该固定相对5种氨基酸、9种磺胺以及10种碱基核苷有较好的分离选择性。实验考察了流动相中有机相乙腈体积分数和水相中乙酸铵浓度对待分离物质保留行为的影响,并进一步对固定相分离的重复性进行了考察,其保留时间的相对标准偏差(RSD)为0.08%~2.30%(n=10)。该亲水色谱固定相制备方法简单,并且表现出了优异的亲水色谱分离性能,有望在磺胺类药物及生物样品中碱基核苷等亲水性物质的分离分析中有一定应用。     

新型鳞片状聚合物修饰硅胶填料固定化酶的制备及其在蛋白质组鉴定中的应用

利用原子转移自由基聚合法制备了鳞片状聚合物修饰的硅胶填料,将其作为一种新型的固定化酶载体,实现了蛋白酶的高密度固定,从而明显缩短了复杂蛋白质样品的酶解时间。使用标准蛋白质对固定化酶的酶解效率进行了考察,结果表明: 鳞片状聚合物修饰的新型固定化酶硅胶填料具有较高的酶解效率,酶解标准蛋白质1 min后,鉴定到肽段的氨基酸序列覆盖率可达95%以上。将该固定化酶硅胶填料成功应用于大肠杆菌全蛋白质的酶解,从2 min酶解肽段的混合物中鉴定到的蛋白质数量超过同样条件下溶液酶解12 h的结果。另外,该固定化酶硅胶填料可以重复使用,其酶解效率具有良好的稳定性和重现性;该固定化酶具有较好的样品回收率,因而可以应用于蛋白质组学研究中。     

表面分子印迹高分子膜修饰硅胶用于血清中茶碱的固相萃取

采用表面引发可逆加成-断裂链转移自由基聚合反应,在硅胶表面修饰了分子印迹高分子膜(MIP-silica)。以元素分析和氮吸附分析对修饰的分子印迹高分子膜进行了表征。与传统采用本体聚合合成的分子印迹高分子相比,MIP-silica具有更好的传质能力。本文合成的茶碱印迹MIP-silica可以作为选择性固相萃取材料从血清中富集、检测微量的茶碱,该法合成的MIP-silica还可用于高效液相色谱和毛细管电色谱等领域。     

咪唑侧基功能化聚离子液体修饰的混合模式色谱固定相的制备及其色谱性能

该文合成了咪唑侧基功能化的离子液体单体1-(4-乙烯基苄基)-3-氰甲基溴化咪唑盐,通过表面引发原子转移自由基聚合将该单体接枝到硅胶表面,制备了一种新型混合模式色谱固定相。采用红外光谱、元素分析及热重分析对其结构进行表征。该色谱固定相具有良好的分离能力。通过研究流动相pH对物质保留的影响,验证了物质在该固定相上存在反相-离子交换保留机理。通过与十八烷基硅烷键合硅胶固定相比较,证实了该聚离子液体固定相对物质保留提供了π-π作用。结果表明,对咪唑侧基功能化是制备新型离子液体固定相的可行方法。     

硅胶负载手性氨基醇聚合物的合成及其应用

以L-亮氨酸(L-Leu)为手性源,经酯化、格氏化、酰胺化等步骤制备手性单体(L-NALAA),以该单体为手性识别基团,在引发剂偶氮二异丁腈和交联剂乙二醇二甲基丙烯酸酯(EDMA)的作用下,与烯化功能硅胶发生自由基共聚反应,制备了新型键合硅胶手性固定相,其结构经FT-IR、TGA、EA表征。以4种对映异构体为模型药物对手性材料手性固定相的手性拆分性能进行研究,结果表明,手性材料手性固定相对奥美拉唑和兰索拉唑的拆分效果较好。     

新型亲水聚合物修饰硅胶颗粒固定化酶的制备及在蛋白质组鉴定中的应用

采用原子转移自由基聚合法制备了亲水聚合物修饰的硅胶颗粒作为一种新型固定化酶载体,在实现胰蛋白酶高密度固定的同时,显著降低了载体材料非特异性吸附导致的样品损失。因此,该固定化酶材料兼具高酶解效率和高回收率的特性。以标准蛋白质牛血清白蛋白(BSA)为样本,使用该固定化酶1 min即可完成酶解,鉴定到肽段对BSA的氨基酸序列覆盖率可达90%以上。该固定化酶材料成功应用于酵母菌全蛋白质复杂样本的酶解,从3 min酶解产物中鉴定到666个蛋白质,超过同样条件下溶液酶解12 h的鉴定结果。     

ATRP技术制备Sil-LMA反相作用色谱固定相及其性能研究

以5μm大孔硅胶为基质,CuBr/Bpy为催化体系,采用原子转移自由基聚合(Atom transfer radical polymerization,ATRP)技术将甲基丙烯酸月桂酯(LMA)键合到硅胶表面,制得Sil-LMA反相作用色谱固定相。采用元素分析对该固定相进行表征,以芳香族化合物为溶质,甲醇-水为流动相,对该键合相的疏水选择性进行了考察。详细研究了甲醇浓度和温度对溶质保留行为的影响,以胺类、酚类化合物为溶质,评价了其色谱性能,并计算了溶质保留过程的热力学参数。经元素分析测得该填料的接枝量高达2.323 3 mg/m2。实验结果表明,在反相模式下该固定相可基线分离5种胺类化合物和5种酚类化合物。与C18反相柱相比,该合成柱的分离时间缩短且分离效果较好。该固定相具有很好的反相色谱性能,符合反相保留机理。     

基于原子转移自由基聚合和“Click”化学方法制备手性色谱固定相

应用原子转移自由基聚合(ATRP)法和"Click"化学方法,以含叠氮基的烯类化合物为单体,在硅胶表面引发聚合,制备了"梳状"手性固定相.该固定相的合成采用"接出"方法接枝聚合物链,使接枝层更为均匀,并且避免了传统合成方法(如物理吸附等)稳定性差的缺点.所得到的"梳状"手性固定相实现了对一些手性药物的分离;并考察了该固定相中聚合物链的密度和长度对其手性分离能力的影响.     

应用于全氟辛烷磺酸萃取富集的全氟癸基修饰毛细管硅胶整体柱的制备及应用

利用溶胶-凝胶法,经过烷氧基硅烷的水解、硅羟基的缩聚、凝胶化、陈化、中孔制备、干燥和表面修饰等步骤制备了全氟癸基修饰的毛细管硅胶整体柱。采用该整体柱对全氟辛烷磺酸(PFOS)进行萃取富集,考察其富集特性和效率,并与传统的C18毛细管硅胶整体柱进行对比。结果表明,全氟癸基修饰毛细管硅胶整体柱(15 cm×75μm)对PFOS具有更高的吸附量和更好的富集选择性,其平均吸附量可以达到75 ng;样品中PFOS的质量浓度为0.25 mg/L时,富集倍数平均可以达到29倍。此全氟癸基修饰毛细管硅胶整体柱对PFOS具有良好的萃取富集性能,可用于水质中痕量PFOS的萃取富集。     

应用于全氟辛烷磺酸萃取富集的全氟癸基修饰毛细管硅胶整体柱的制备及应用

利用溶胶-凝胶法,经过烷氧基硅烷的水解、硅羟基的缩聚、凝胶化、陈化、中孔制备、干燥和表面修饰等步骤制备了全氟癸基修饰的毛细管硅胶整体柱。采用该整体柱对全氟辛烷磺酸(PFOS)进行萃取富集,考察其富集特性和效率,并与传统的C18毛细管硅胶整体柱进行对比。结果表明,全氟癸基修饰毛细管硅胶整体柱(15 cm×75 μm)对PFOS具有更高的吸附量和更好的富集选择性,其平均吸附量可以达到75 ng;样品中PFOS的质量浓度为0.25 mg/L时,富集倍数平均可以达到29倍。此全氟癸基修饰毛细管硅胶整体柱对PFOS具有良好的萃取富集性能,可用于水质中痕量PFOS的萃取富集。     

High density cationic polymer brushes from combined “click chemistry” and RAFT‐mediated polymerization

A simple method for preparing cationic poly[(ar‐vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes was used by combined technology of “click chemistry” and reversible addition‐fragmentation chain transfer (RAFT) polymerization. Initially, silicon surfaces were modified with RAFT chain transfer agent by using a click reaction involving an azide‐modified silicon wafer and alkyne‐terminated 4‐cyanopentanoic acid dithiobenzoate (CPAD). A series of poly(VBTAC) brushes on silicon surface with different molecular weights, thicknesses, and grafting densities were then synthesized by RAFT‐mediated polymerization from the surface immobilized CPAD. The immobilization of CPAD on the silicon wafer and the subsequent polymer formation were characterized by X‐ray photoelectron spectroscopy, water contact angle measurements, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and ellipsometry analysis. The addition of free CPAD was required for the formation of well‐defined polymer brushes, which subsequently resulted in the presence of free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. In addition, by varying the polymerization time, we were able to obtain poly(VBTAC) brushes with grafting density up to 0.78 chains/nm² with homogeneous distributions of apparent needle‐like structures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Grafting of molecularly imprinted polymers from the surface of silica gel particles via reversible addition-fragmentation chain transfer polymerization: A selective sorbent for theophylline

Molecularly imprinted polymers (MIPs) were grafted successfully from the surface of silica gel particles via surface initiated reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized silica gel as the chain transfer agent. The intrinsic characteristics of the controlled/living polymerization mechanism of RAFT allowed for the effective control of the grafting process. Thus the grafting copolymerization of methacrylic acid and divinyl benzene in the presence of template theophylline led to thin MIP film coating silica gel (MIP-Silica). The thickness of MIP film prepared in this study is about 1.98 nm, which was calculated from the nitrogen sorption analysis results. Measured binding kinetics for theophylline to the MIP-Silica and MIPs prepared by conventional bulk polymerization demonstrated that MIP-Silica had improved mass-transfer properties. In addition, the theophylline-imprinted MIP-Silica was used as the sorbent in solid-phase extraction to determine theophylline in blood serum with satisfactory recovery higher than 90%. Nonspecific adsorption of interfering compounds can be eliminated by a simple elution with acetonitrile, without sacrificing the selective binding of theophylline.     

Preparation of core-shell molecularly imprinted polymer via the combination of reversible addition-fragmentation chain transfer polymerization and click reaction

In this paper, we demonstrated an efficient and robust route to the preparation of well-defined molecularly imprinted polymer based on reversible addition-fragmentation chain transfer (RAFT) polymerization and click chemistry. The alkyne terminated RAFT chain transfer agent was first synthesized, and then click reaction was used to graft RAFT agent onto the surface of silica particles which was modified by azide. Finally, imprinted thin film was prepared in the presence of 2,4-dichlorophenol as the template. The imprinted beads were demonstrated with a homogeneous polymer films (thickness of about 2.27 nm), and exhibited thermal stability under 255°C. The as-synthesized product showed obvious molecular imprinting effects towards the template, fast template rebinding kinetics and an appreciable selectivity over structurally related compounds.     

Polymerization of vinyl monomers in the presence of silica having surface functional groups

The surface of silica was modified by mercaptopropyl, chloropropyl, aminopropyl, and methacryloxypropyl groups by the treatment of silica with the corresponding silane coupling agents, and the effects of functional groups on the surface on the polymerization of vinyl monomers initiated by benzoyl peroxide or 2,2-azobisisobutyronitrile were investigated. Although the rate of the polymerization of vinyl monomers in the presence of silica was almost equal to that in the absence of silica, a part of polymer formed was grafted onto silica surface. The polymerization was considerably retarded in the presence of these functionalized silicas and the corresponding polymers were effectively grafted onto the surface. The molecular weight of ungrafted polymer formed in the presence of the functionalized silica was lower than that formed in the presence of unmodified silica. This indicates that the chain transfer reaction of growing polymer radical to functionalized silica surface forms radicals on the surface, which then couples with growing polymer radical and/or reinitiates the polymerization to give rise to the grafting of polymers onto the surface. In the case of silica having methacryloxypropyl groups, the grafting based on the copolymerization of vinyl monomer with the surface methacryloxypropyl groups was considered to successfully proceed.     

Encapsulation of silica nanoparticles by redox-initiated graft polymerization from the surface of silica nanoparticles

This study describes a facile and versatile method for preparing polymer-encapsulated silica particles by ‘grafting from’ polymerization initiated by a redox system comprising ceric ion (Ce⁴⁺) as an oxidant and an organic reductant immobilized on the surface of silica nanoparticles. The silica nanoparticles were firstly modified by 3-aminopropyltriethoxysilane, then reacted with poly(ethylene glycol) acrylate through the Michael addition reaction, so that hydroxyl-terminated poly(ethylene glycol) (PEG) were covalently attached onto the nanoparticle surface and worked as the reductant. Poly(methyl methacrylate) (PMMA), a common hydrophobic polymer, and poly(N-isopropylacrylamide) (PNIPAAm), a thermosensitive polymer, were successfully grafted onto the surface of silica nanoparticles by ‘grafting from’ polymerization initiated by the redox reaction of Ce⁴⁺ with PEG on the silica surface in acid aqueous solutions. The polymer-encapsulated silica nanoparticles (referred to as silica@PMMA and silica@PNIPAAm, respectively) were characterized by infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy. On the contrary, graft polymerization did not occur on bare silica nanoparticles. In addition, during polymerization, sediments were observed for PMMA and for PNIPAAm at a polymerization temperature above its low critical solution temperature (LCST). But the silica@PNIPAAm particles obtained at a polymerization temperature below the LCST can suspend stably in water throughout the polymerization process.     

Synthesis and characterization of silica–polyvinyl imidazole core–shell nanoparticles via combination of RAFT polymerization and grafting‐to method

The silica–polyvinyl imidazole core–shell nanoparticles (silica/PVI NPs) with controlled shell thickness and narrow distribution size were fabricated via “grafting‐to” method. First, O‐ethyl xanthate terminated PVI with various chain lengths was produced via the reversible addition–fragmentation chain transfer (RAFT) polymerization using O‐ethyl‐S‐phenyl dithiocarbonate (EPDC) as RAFT agent. Next, three synthesized PVI of different molecular weights (3.4, 6.6, and 11 kg/mol) were successfully grafted to the methacrylate modified silica NPs from solution by radical mediated grafting‐to method. These core–shell NPs were then characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectrum measurements (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Polyvinyl imidazole molecular weight, reaction time, polymer concentration, and reaction temperature were all used to control the grafting reaction for PVI grafting densities and shell thicknesses. The highest grafting density obtained was close to 1.2 chains/nm² and was achieved for 3.4 kg/mol PVI at 80°C. The prepared silica/PVINP displayed efficient antifouling properties and stability in concentrated sodium chloride aqueous solutions over a broad pH range for a period of at least 7 days. Copyright © 2017 John Wiley & Sons, Ltd.     

Tailor‐made hybrid nanostructure of poly(ethyl acrylate)/clay by surface‐initiated atom transfer radical polymerization

Hybrid nanoarchitecture of tailor‐made Poly(ethyl acrylate)/clay was prepared by surface‐initiated atom transfer radical polymerization (SI‐ATRP), by tethering ATRP initiator on active hydroxyl group, present in surface as well as in the organic modifier of the clay used. Extensive exfoliation was facilitated by using these initiator modified clay platelets. Poly(ethyl acrylate) chains with controlled polymerization and narrow polydispersities were forced to be grown from within the clay gallery (intergallery) as well as from the outer surface (extragallery) of the clay platelets. The polymer chains attached onto clay surfaces might have the potential to provide the composites with enhanced compatibility in blends with common polymers. Attachment of the initiator on clay platelets was confirmed by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), elemental analysis, Wide‐angle X‐ray diffraction (WAXD), and microscopic analysis. Finally, end group analysis (by Matrix‐Assisted Laser Desorption Ionization Mass Spectrometry, and chain extension experiment) of the cleaved polymer and morphological study (by WAXD, Transmission Electron Microscopy), performed on the polymer grafted clays examined the effect of grafting on the efficiency of polymerization and the degree of dispersion of clay tactoids in polymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5014–5027, 2008     

一种利用梯度光掩模制备梯度表面的简便方法

以自制杂化双向拉伸聚丙烯/氧化硅(BOPP/SiOx)有机/无机杂化膜为基材,由喷墨打印机直接在杂化膜表面打印色阶图案,制备出对紫外光强度呈梯度透过的梯度光掩模;通过此掩模控制,在双向拉伸聚丙烯(BOPP)和聚对苯二甲酸乙二醇酯(PET)表面实施受限光催化氧化(CPO)光感应羟基化反应、受限光接枝丙烯酸(AA)以及表面...     

Preparation of End Grafted Polyacrylonitrile Brushes through Surface Confined Radical Chain Transfer Reaction

End grafted polyacrylonitrile (PAN) brush was prepared through surface initiated polymerization via the chain transfer process.The thiol-terminated monolayer and PAN brushes were characterized by FTIR,X-ray photoelectron spectroscopy(XPS),atomic force microscopy (AFM),ellipsometry and contact angle measurements etc.It is demonstrated that radical chain transfer reaction and surface initiated precipitate polymerization can used to prepare end-grafted polymer brushes.