高中化学实验的项目式教学*——乙醇消去反应制备乙烯的实验探究

以乙醇消去反应制备乙烯改进实验探究为项目,通过“分析浓硫酸催化乙醇消去反应制备乙烯实验不足的改进方向”“设计并实践乙醇消去反应制备乙烯的实验改进方案”“汇报实验并提出最终改进方案”3个任务,深化对核心知识消去反应的理解和对实验方案设计方法及实验探究过程的深刻体会,并在问题解决中发展“科学探究与创新意识”素养。     

HZSM-5催化乙醇脱水停料效应的研究

在HZSM-5分子筛催化乙醇脱水反应中观察到了停料效应：即当停止乙醇-水进料一定时间,恢复进料后乙烯选择性明显提高。通过考察不同反应条件下的停料效应,发现乙醇质量分数控制在55%附近、延长停料时间、升高反应温度和降低乙醇进料空速会提高停料效应强度,并较长时间维持高乙烯选择性。500 h的催化剂稳定性测试表明,停料效应可有效延长催化剂的使用寿命。结合含水乙醇脱水反应机理和实验结果,推测HZSM-5催化乙醇脱水停料效应产生的原因是停料时乙氧基中间体的积累和催化活性空位的再生。     

Cu/HZSM-5分子筛上乙醇芳构化的在线分析及其催化活性的评价

通过对Cu/HZSM-5分子筛上乙醇的无氧芳构化反应主要产物的在线定量分析,评价了催化剂组成、反应温度、气体空速对芳构化活性的影响。结果表明:Cu/HZSM-5分子筛具有良好的芳构化性能。当金属Cu含量为5%,催化温度为300℃,乙醇气体空速为167h-1时,催化剂具有最好的芳构化效果,乙醇的转化率为35.41%,苯的选择性达到了27.59%。对不同催化温度下反应产物中乙烯生成量的变化情况的研究,证实了乙烯是此催化反应过程的一种最初产物。     

SiO_2负载钼催化剂的合成及其催化乙烯二聚、同系化和歧化的反应性能

从单核及双核二甲胺钼络合物出发,制备了SiO_2负载的钼催化剂。程序升温分解实验(TPDE)及红外测试表明,双核钼络合物与SiO_2作用生成双钼中心物种,此物种可催化乙烯的二聚反应。280℃活化后此双钼中心物种变成单钼中心物种,单钼物种只催化乙烯的同系化及歧化反应。     

基于正交实验的实验室脱水制乙烯实验改进

设计装置简单、操作简便、安全性高、现象明显、高效高产的实验室脱水制乙烯实验。并以乙醇的用量、反应火候、乙醇与火焰的距离为变量,设计正交实验,在保障产率的同时,探究实验室脱水制乙烯新方案的最佳演示实验效果。     

地方城市空间要素规划建设时序研究:以清代台湾省为例*

Cr/PNP催化乙烯选择性齐聚反应制短链线性α-烯烃(LAOs)技术是近年来发展极为迅速的研究方向,其中关于反应微观机理的研究对高性能催化剂设计和研发具有重要意义.通过使用量子化学计算与实验相结合的方法,可以获得对催化反应过程更为深刻的认识.我们主要从理论计算研究的角度,总结了铬系催化剂催化乙烯选择性齐聚研究中取得的最新成果.主要内容包括反应过程中催化剂的氧化态[Cr(Ⅰ/Ⅲ) vs Cr(Ⅱ/Ⅳ)],反应路径中单乙烯和双乙烯配位的竞争,配体的空间结构和电子效应,自然键轨道理论(NBO)以及H_2效应对催化体系的影响等.     

气相色谱-质谱联用研究β-甲基萘的长链烷基化

以气相色谱．质谱联用技术为主要分析手段，研究了三氯化铝或HY沸石分子筛催化阻甲基萘的长链烷基化，这里以1-十二烯烃为烷基化剂。结果表明：GC／MS是评价芳烃烷基化反应工艺的有效手段，也是产品有效的表征手段。三氯化铝和HY沸石分子筛均具有较好的催化活性，采用传统的三氯化铝催化剂催化，产物非常复杂。而HY沸石分子筛催化烷基化，产品简单。本文建立一种便捷、可靠的甲基萘长链烷基化工艺评价手段，为反应条件的优化、反应机理的探讨及研究和开发包括沸石分子筛催化，室温离子液催化等绿色烷基化工艺的新型催化体系创造了条件。     

4-对甲苯基-4-氧代丁酸的制备——推荐一个大学基础有机化学实验

介绍一个利用Friedel Crafts反应制备γ芳基取代的γ羰基酸———4对甲苯基4氧代丁酸的方法。该实验以甲苯和丁二酸酐为原料,在无水三氯化铝催化下通过付氏酰基化反应,经加热、酸化水解、水蒸气蒸馏,最后得固体产品。推荐该实验作为大学有机化学基础实验。     

生物乙醇催化脱水制乙烯的研究进展

阐述了利用生物质能源的重要性,介绍了生物乙醇催化脱水制乙烯的发展现状,特别是其催化剂的研究状况。针对乙醇脱水制乙烯催化剂存在的问题,提出当前催化剂的发展趋势。     

三氯化铝催化合成阳离子淀粉

以淀粉和三甲基环氧丙基氯化铵为原料,在三氯化铝催化作用下,制备了阳离子淀粉,最佳反应条件为:淀粉 50g,三甲基环氧丙基氯化铵 10g,三氯化铝 0. 74g, 50%乙醇 60mL,反应温度 50℃,反应时间 17h.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.