稀土铕与2—[（取代苯胺基）羰基]苯甲酸配合物的研究

报道了配合物Ｅｕ（ＸｎＰ）３．３Ｈ２Ｏ「其中Ｘ＝Ｈ，２－Ｃｌ，３－ＯＨ，４－Ｂｒ，３－ＮＯ２，２－ＯＣＨ３，２－ＣＨ３，２，４－二氯；Ｐ＝２－（ＣＯＯ）Ｃ６Ｈ４ＣＯＮＨＣ６Ｈ５－＾－，ｎ＝１，２」的制备，并用元素分析，红外光谱，电子反射光谱，热重分析进行了表征。     

稀土铕与2－［（取代苯胺基）羰基］苯甲酸配合物的研究

报道了配合物Ｅｕ（ＸｎＰ）３·３Ｈ２Ｏ［其中Ｘ＝Ｈ，２－Ｃｌ，３－ＯＨ，４－Ｂｒ，３－ＮＯ２，２－ＯＣＨ３，２－ＣＨ３，２，４－二氯；Ｐ＝２－（ＣＯＯ）Ｃ６Ｈ４ＣＯＮＨＣ６Ｈ５－ｎ－，ｎ＝１，２］的制备，并用元素分析，红外光谱，电子反射光谱，热重分析进行了表征。结果表明配位是通过羧酸基上氧原子和酰胺羰基氧原子进行的，含３分子水。通过电子反射光谱，对Ｎｅｐｈｅｌａｕｘｅｔｉｃ比率（Ｂ），平均共价参数（δ）和平均成键参数（ｂ１／２）进行了计算，对配合物的共价成键情况进行了讨论。     

微波碱解法消除土壤样品多氯联苯测定中有机氯农药的干扰

有机氯农药（Ｏps）严重干扰多氯联苯（ＰＣＢs）的测定,本文彩微波加热技术将Ｏps碱 解,在优化的实验条件下能完全消除六六六（ＨＣＨ）、双对氯苯基三氯乙烷（ＤＤＴ）、二氯二苯二氯乙烷（ＤＤＤ）的干扰,二氯二苯二氯乙烷（ＤＤＥ）、艾试剂（Ａｌｄｒｉｎ）、狄试剂（Ｄｉｅｌｄｒｉｎ?也有一定数量的减少,狄试剂经浓硫酸处理后其干扰完全消除。通过对合成土壤样品的处理,表明该法能有效的碱解Ｏps,消除其对测定ＰＣＢsr     

两种钌（Ⅱ）络合物的核磁共振氢谱分析

报道了顺二氯二联吡啶钌（Ⅱ）和顺－二氯二邻二氮菲钌（Ⅱ）的核磁共振氢谱。利用＾１Ｈ－＾１ＨＣＯＳＹ谱详细分析并归属了这两种络合物的氢谱峰，并给出了各质子的偶合数，同时验证了其顺式的立体构型。     

分散红掺杂高Tg聚合物母体的非线性光学性质的研究

利用具有非线性光学（ＮＬＯ）活性的分散红（ＤＲＩ）掺杂高玻璃化转变温度的酚酞聚羟基醚（ＰＨＰ）和酚酞－联苯二酚－二氯二苯酮三元共聚物（ＰＰＨＢＰ－ＤＣＢＰ ｃｏｐｏｌｙｍｅｒ），得到了两种掺杂型非线性光学材料。升温电晕极化（ＣＯＰＥＴ）表明有较高的取向和较慢松驰，并推算了极化场强度Ｅｐ和二阶非线性系数ｄ３３。     

单核铁配合物与过氧酸反应的研究

本文用波谱及高压液相色谱（ＨＰＬＣ）方法研究了二氯代三－２－吡啶甲基胺的铁（Ⅲ）配合物（ＦｅＴＰＡＣｌ＿２ＣｌＯ＿４），三─６─甲基─２─吡啶甲基胺合铁（Ⅱ）与苯甲酸的配合物（Ｆｅ（Ⅱ）ＴＬＡＯＢｚＣｌＯ＿４）同单过氧化邻苯二甲酸六水合镁盐（ｍｏｎｏｐｅｒｏｘｙｐｈｔｈａｌｉｃａｃｉｄ，ｍａｇｎｅｓｉｕｍｓａｌｔｈｅｘａｈｙｄｒａｔｅ，即ＭＰＰＡ）的反应。提出了过氧键的两种断裂（即均裂和异裂）机理，分析了中心离子价态、配体结构等因素对反应机理的影响；并通过ＦｅＴＰＡＣｌ＿２ＣｌＯ＿４与间氯代过氧代苯甲酸（ｍｃＰＢＡ）的反应，研究了过氧酸结构对反应机理的影响。实验结果表明：就过氧酸中过氧键发生均裂的程度而言：三价铁配合物与过氧酸的反应＞二价铁配合物与过氧酸的反应；ＭＰＰＡ反应体系＞ＭＣＰＢＡ反应体系。     

两种钴（Ⅲ）配合物的核磁共振氢谱分析

多吡啶钴配合物具有良好的催化、电化学和光化学性质。报道了顺－氯化二氯二联吡啶钴（Ⅲ）和顺－氯化二氯二邻菲咯啉钴（Ⅲ）的高分辩核磁共振谱,利用氢－氢同核相关谱（＾１Ｈ－＾１ＨＣＯＳＹ）详细归属了这两种配合物的氢谱峰,给出了各质子间的偶合常数。核磁共振氢谱验证了他们的顺式立体构型。     

含“CCl_3”或“C≡C”基团的酯类化合物的合成与表征

本文合成了六个含“ＣＣｌ３”或“ＣＣ”基团的酯类化合物（［Ｃｌ３ＣＣ（Ｏ）ＯＣＨ２］２１;ｐ－（Ｃｌ３ＣＣ（Ｏ）Ｏ）２Ｃ６Ｈ４２;（Ｃｌ３ＣＣ（Ｏ）Ｏ）３Ｃ３Ｈ５３;（Ｃｌ３ＣＣ（Ｏ）ＯＣＨ２）４Ｃ４;Ｃｌ３ＣＣ（Ｏ）ＯＣＨ２ＣＣＨ５;Ｃ６Ｈ５Ｃ（Ｏ）ＯＣＨ２ＣＣＨ６）并对其进行了Ｃ／Ｈ分析、ＩＲ、１ＨＮＭＲ等项表征,对化合物５、６进行了质谱分析。     

不同阳离子Y分子筛上金属络合物的吸附和分解 Ⅱ.Co(CO)_3NO吸附和分解的红外光谱表征

采用红外光谱表征了含不同阳离子的Ｙ分子筛上Ｃｏ（ＣＯ）３ＮＯ的吸附和分解及其和阳离子的作用．结果表明，Ｃｏ（ＣＯ）３ＮＯ吸附后主要形成Ｃｏ（ＣＯ）ｘＮＯ（ｘ＝２，３），并出现热稳定性较高的Ｃｏ（ＮＯ）２＋２．产生Ｃｏ（ＮＯ）２＋２的机制和最终分解产物与分子筛阳离子的性质有关．ＮａＹ上Ｃｏ（ＣＯ）ｘＮＯ歧化产生少量Ｃｏ（ＮＯ）２＋２，分解产物主要为Ｃｏ（０）；ＣｏＹ中Ｃｏ２＋的存在部分避免了Ｃｏ（ＣＯ）ｘＮＯ的歧化，分解得到的Ｃｏ（０）含量较高；ＮｉＹ，尤其ＣｕＹ阳离子和吸附物种发生电子转移，形成ＮＯ＋中间物种，氧化Ｃｏ（０）产生Ｃｏ（ＮＯ）２＋２，分解产物为Ｃｏ（０）和Ｃｏ（Ⅱ）的混合物．     

[Cu2（Gly—GlyO）2（4,4‘—bpy）（OH）2].10H2O配合物的合成,晶 …

合成了以４，４－ｂｐｙ为中继基，Ｇｌｙ，ＧｌｙＯ为螯环的新型双核铜配合物。经Ｘ射线单昌结构分析确定该配合化合物的化学式为「（Ｈ２ＣＣＨ２ＣＯＮＨＣＨ２ＣＯＯ）Ｃｕ（ＯＨ）Ｃｕ（ＯＨ）（Ｃ１０Ｈ８Ｎ２０Ｃｕ（ＯＨ）－（Ｈ２ＮＣＨ２ＣＯＮＨＨＣＨ２ＯＯ）．」１０Ｈ２Ｏ。     

Kinetics and mechanism of the oxidation of amaranth with hypochlorite

The reaction mechanism of the oxidation of Amaranth dye (2-hydroxy-1-(4-sulfonato-1-naphthylazo) naphthalene-3,6-disulfonate) with hypochlorite under varied pH conditions was elucidated by a kinetic approach. Under excess concentration of oxidant, the reaction followed pseudo-first-order kinetics with respect to Amaranth, and the oxidation was found to occur through two competitive reactions, initiated by hypochlorite and hypochlorous acid. The reaction order with respect to both OCl(-) ion and HOCl was unity. While the latter reaction was fast, the significance of the oxidation paths depended on the relative concentration of the two oxidizing species, which was dictated by the reaction pH. The role of the H(+) ion in the reaction was established. For the hypochlorite ion and hypochlorous acid facilitated reactions, the second-order rate coefficients were 1.9 and 23.2 M(-1) s(-1), respectively. The energy parameters were E(a) = 33.7 kJ mol(-1), ΔH(?) = 31.2 kJ mol(-1) and ΔS(?) = -190.6 J K(-1) mol(-1) for the OCl(-) ion-driven oxidation, and E(a) = 26.9 kJ mol(-1), ΔH(?) = 24.3 kJ mol(-1) and ΔS(?) = -222.8 J K(-1) mol(-1) for the reaction with HOCl-initiated oxidation. The major oxidation products for both the pathways were 3,4-dihydroxy naphthalene-2,7-disulfonic sodium salt (P(1)), dichloro-1,4-naphthoquione (P(2)) and naphtha(2,3)oxirene-2, 3-dione (P(3)). On the basis of the primary salt effect and other kinetic data, the rate law for the overall reaction and probable reaction mechanism was elucidated. The proposed mechanism was validated by simulations using Simkine-2.     

Regiochemistry of the photostimulated reaction of the phthalimide anion with 1-iodoadamantane and tert-butylmercury chloride by the S(RN)1 mechanism

The photostimulated reaction of the phthalimide anion (1) with 1-iodoadamantane (2) gave 3-(1-adamantyl) phthalimide (3) (12%) and 4-(1-adamantyl) phthalimide (4) (45%), together with the reduction product adamantane (AdH) (21%). The lack of reaction in the dark and inhibition of the photoinduced reaction by p-dinitrobenzene, 1,4-cyclohexadiene, and di-tert-butylnitroxide indicated that 1 reacts with 2 by an S(RN)1 mechanism. Formation of products 3 and 4 occurs with distonic radical anions as intermediates. The photoinduced reaction of anion 1 with tert-butylmercury chloride (10) affords 4-tert-butylphthalimide (11) as a unique product. By competition experiments toward 1, 1-iodoadamantane was found to be ca. 10 times more reactive than tert-butylmercury chloride.     

Kinetic study of the gas-phase reaction of OH with Br2

An experimental, temperature-dependent kinetic study of the gas-phase reaction of the hydroxyl radical with molecular bromine (reaction 1) has been performed by using a pulsed laser photolysis/pulsed-laser-induced fluorescence technique over a wide temperature range of 297-766 K, and at pressures between 6.68 and 40.29 kPa of helium. The experimental rate coefficients for reaction 1 demonstrate no correlation with pressure and exhibit a negative temperature dependence with a slight negative curvature in the Arrhenius plot. A nonlinear least-squares fit with two floating parameters of the temperature-dependent k(1)(T) data set using an equation of the form k(1)(T) = AT(n) yields the recommended expression k(1)(T) = (1.85 x 10(-9))T(-0.66) cm(3) molecule(-1) s(-1) for the temperature dependence of the reaction 1 rate coefficient. The potential energy surface (PES) of reaction 1 was investigated with use of quantum chemistry methods. The reaction proceeds through formation of a weakly bound OH...Br(2) complex and a PES saddle point with an energy below that of the reactants. Temperature dependence of the reaction rate coefficient was modeled by using the RRKM method on the basis of the calculated PES.     

S-oxygenation of thiocarbamides I: Oxidation of phenylthiourea by chlorite in acidic media

The oxidation of 1-phenyl-2-thiourea (PTU) by chlorite was studied in aqueous acidic media. The reaction is extremely complex with reaction dynamics strongly influenced by the pH of reaction medium. In excess chlorite concentrations the reaction stoichiometry involves the complete desulfurization of PTU to yield a urea residue and sulfate: 2ClO2- + PhN(H)CSNH2 + H2O --> SO4(2-) + PhN(H)CONH2 + 2Cl- + 2H+. In excess PTU, mixtures of sulfinic and sulfonic acids are formed. The reaction was followed spectrophotometrically by observing the formation of chlorine dioxide which is formed from the reaction of the reactive intermediate HOCl and chlorite: 2ClO2- + HOCl + H+ --> 2ClO2(aq) + Cl- + H2O. The complexity of the ClO2- - PTU reaction arises from the fact that the reaction of ClO2 with PTU is slow enough to allow the accumulation of ClO2 in the presence of PTU. Hence the formation of ClO2 was observed to be oligooscillatory with transient formation of ClO2 even in conditions of excess oxidant. The reaction showed complex acid dependence with acid catalysis in pH conditions higher than pKa of HClO2 and acid retardation in pH conditions of less than 2.0. The rate of oxidation of PTU was given by -d[PTU]/dt = k1[ClO2-][PTU] + k2[HClO2][PTU] with the rate law: -d[PTU]/dt = [Cl(III)](T)[PTU]0/K(a1) + [H+] [k1K(a1) + k2[H+]]; where [Cl(III)]T is the sum of chlorite and chlorous acid and K(a1) is the acid dissociation constant for chlorous acid. The following bimolecular rate constants were evaluated; k1 = 31.5+/-2.3 M(-1) s(-1) and k2 = 114+/-7 M(-1) s(-1). The direct reaction of ClO2 with PTU was autocatalytic in low acid concentrations with a stoichiometric ratio of 8:5; 8ClO2 + 5PhN(H)CSNH2 + 9H2O --> 5SO4(2-) + 5PhN(H)CONH2 + 8Cl- + 18H+. The proposed mechanism implicates HOCl as a major intermediate whose autocatalytic production determined the observed global dynamics of the reaction. A comprehensive 29-reaction scheme is evoked to describe the complex reaction dynamics.     

Synthesis of poly(4-vinylbenzocyclobutene) and its reaction with dienophiles

4-Vinylbenzocyclobutene ( 1 ) was prepared by the nickel-catalyzed coupling reaction of 4-bromobenzocyclobutene with vinylbromide in 70% yield. Radical homopolymerization of 1 at 60°C for 24 h afforded poly(4 vinylbenzocyclobutene) [poly( 1 )] in 89% yield and radical copolymerizations of 1 with styrene (St) or methyl methacrylate (MMA) were carried out to obtain the corresponding copolymers. The Q = 1.07, e = 0.046. As a model reaction of the polymer reaction of the polymer reaction of poly( 1 ) and poly(4-vinylbenzocyclobutene-co-styrene) [copoly( 1 -St)] with dienophiles, the Diels-Alder reaction of benzocyclobutene with N-phenylmaleimide (MI) or maleic anhydride (MANH) was carried out to determine the optimum reaction conditions. Under the optimum condition, the Diels-Alder reaction of poly( 1 ) and copoly( 1 -St) with MI and MANH in the presence of 4-tert-butyl-catechol as an inhibitor were carried out to yield the corresponding polymers in good yields. The properties (solubilities, T_g, and temperature of 10% weight loss) of the products obtained from the polymer reaction were different from these of poly( 1 ). © 1995 John Wiley & Sons, Inc.     

Reactions of SO3 with the O/H radical pool under combustion conditions

The reactions of SO3 with H, O, and OH radicals have been investigated by ab initio calculations. For the SO3 + H reaction (1), the lowest energy pathway involves initial formation of HSO3 and rearrangement to HOSO2, followed by dissociation to OH + SO2. The reaction is fast, with k(1) = 8.4 x 10(9)T(1.22) exp(-13.9 kJ mol(-1)/RT) cm(3) mol(-1) s(-1) (700-2000 K). The SO3 + O --> SO2 + O2 reaction (2) may proceed on both the triplet and singlet surfaces, but due to a high barrier the reaction is predicted to be slow. The rate constant can be described as k(2) = 2.8 x 10(4)T(2.57) exp(-122.3 kJ mol(-1)/RT) cm(3) mol(-1) s(-1) for T > 1000 K. The SO3 + OH reaction to form SO2 + HO2 (3) proceeds by direct abstraction but is comparatively slow, with k(3) = 4.8 x 10(4)T(2.46) exp(-114.1 kJ mol(-) 1/RT) cm(3) mol(-1) s(-1) (800-2000 K). The revised rate constants and detailed reaction mechanism are consistent with experimental data from batch reactors, flow reactors, and laminar flames on oxidation of SO2 to SO3. The SO3 + O reaction is found to be insignificant during most conditions of interest; even in lean flames, SO3 + H is the major consumption reaction for SO3.     

Effect of amine nature on reaction mechanism: aminolyses of o-4-nitrophenyl thionobenzoate with primary and secondary amines

Pseudo-first-order rate constants (k(obs)) have been measured spectrophotometrically for reactions of O-4-nitrophenyl thionobenzoate (2) with a series of primary and acyclic secondary amines. The plots of k(obs) vs amine concentration are linear for the reaction of 2 with primary amines. The slope of the Br?nsted-type plot for the reaction of 2 with primary amines decreases from 0.77 to 0.17 as the amine basicity increases, indicating that the reaction proceeds through a zwitterionic addition intermediate in which the rate-determining step changes from the breakdown of the intermediate to the reaction products to the formation of the intermediate as the amine basicity increases. On the other hand, for reactions with all the acyclic secondary amines studied, the plot of k(obs) vs amine concentration exhibits an upward curvature, suggesting that the reaction proceeds through two intermediates, e.g., a zwitterionic addition intermediate and an anionic intermediate. The microscopic rate constants (k(1), k(-)(1), k(2), and k(3) where available) have been determined for the reactions of 2 with all the primary and secondary amines studied. The k(1) value is larger for the reaction with the primary amine than for the reaction with the isobasic acyclic secondary amines, while the k(-)(1) value is much larger for the latter reaction than for the former reaction. The k(3) value for the reaction with secondary amine is independent of the amine basicity. The small k(2)/k(-)(1) ratio is proposed to be responsible for the deprotonation process observed in aminolyses of carbonyl or thiocarbonyl derivatives.     

Kinetics and product branching ratios of the reaction of (1)CH2 with H2 and D2

The reactions of singlet methylene (a(1)A1 (1)CH2) with hydrogen and deuterium have been studied by experimental and theoretical techniques. The rate coefficients for the removal of singlet methylene with H2 (k1) and D2 (k2) have been measured from 195 to 798 K and are essentially temperature-independent with values of k1 = (10.48 +/- 0.32) x 10(-11) cm(3) molecule(-1) s(-1) and k2 = (5.98 +/- 0.34) x 10(-11) cm(3) molecule(-1) s(-1), where the errors represent 2sigma, giving a ratio of k1/k2 = 1.75 +/- 0.11. In the reaction with H2, singlet methylene can be removed by reaction giving CH3 + H or deactivated to ground-state triplet methylene. Direct measurement of the H atom product showed that the fraction of relaxation decreased from 0.3 at 195 K to essentially zero at 398 K. For the reaction with deuterium, either H or D may be eliminated. Experimentally, the H:D ratio was determined to be 1.8 +/- 0.5 over the range 195-398 K. Theoretically, the reaction kinetics has been predicted with variable reaction coordinate transition state theory and with rigid-body trajectory simulations employing various high-level, ab initio-determined potential energy surfaces. The magnitudes of the calculated rate coefficients are in agreement with experiment, but the calculations show a significant negative temperature dependence that is not observed in the experimental results. The calculated and experimental H to D ratios from the reaction of singlet methylene with D2 are in good agreement, suggesting that the reaction proceeds entirely through the formation of a long-lived methane intermediate with a statistical distribution of energy.     

Eco-friendly synthesis of jasminaldehyde by condensation of 1-heptanal with benzaldehyde using hydrotalcite as a solid base catalyst

The catalytic activity of hydrotalcite ([M(II)_1−xM(III)_x(OH₂)]^x+(CO₃²⁻)_x/n·mH₂O; where M(II) = Mg, Ni, Zn and M(III) = Al) was evaluated for the synthesis of jasminaldehyde by solvent free condensation of 1-heptanal with benzaldehyde. The effect of activation of as-synthesized Mg-Al hydrotalcite samples of varied Mg/Al molar ratio on its catalytic activity was studied and correlated with their basicity as determined from the model test reaction. The effect of reaction parameters such as, amount of catalyst, benzaldehyde to 1-heptanal molar ratio and reaction temperature on conversion of 1-heptanal and selectivity of jasminaldehyde was studied in detail. Maximum selectivity of jasminaldehyde (86%) with 98% conversion of 1-heptanal was observed using as-synthesized Mg-Al hydrotalcite of Mg/Al molar ratio of 3.5 as a catalyst. The kinetics of the reaction was measured and reaction rate and order of reaction were determined under optimum reaction conditions. The catalyst was re-used upto three cycles without significant loss in its activity. The base catalyzed reaction mechanism for condensation of 1-heptanal with benzaldehyde is proposed.     

Synthesis and characterization of poly(4-vinylpyridine) substituted with a novel betaine salt derived from 4,5-dicyanoimidazole

A novel betaine internal salt ( 3 ) has been synthesized by the reaction of pyridine with 1-methyl-2-bromo-4,5-dicyanoimidazole ( 1 ). The reaction of pyridine with 1 serves as a model for the reaction of poly(4-vinylpyridine) with 1 . The reaction of poly(4-vinylpyridine) with 1 gives betaine salt substituted polymers which were characterized by IR, NMR, UV-visible spectroscopy, and viscometry. The substituted polymers were compared to the model compound ( 3 ) and to unsubstituted poly(4-vinylpyridine) in order to determine polymer structure and the degree of substitution. One of the substituted polymers shows polyelectrolyte behavior. Thermal characterization of the substituted polymers shows two exothermic transitions at 260 and 340°C attributed to chemical reactions of the pendant groups.