Y2O3薄膜/锡掺杂玻璃光波导气敏元件及其气敏性

采用溶胶-凝胶法将氧化钇(Y2O3)敏感膜固定在锡掺杂玻璃光波导表面,研制出了Y2O3薄膜/锡掺杂玻璃光波导气敏元件,并对挥发性有机气体进行了检测.通过XRD测试对敏感薄膜的结构及晶粒尺寸进行了表征.实验结果表明,在室温下Y2O3薄膜/锡掺杂玻璃光波导气敏元件对二甲苯、氯苯气体有较好的选择性响应,其响应浓度范围为l×10-3 ～1×10-5(V/V).Y2O3薄膜/锡掺杂玻璃光波导气敏元件具有灵敏度高、成本低、响应速度快、制作工艺简单和可逆性好等优点.     

LiCl、CaCl_2和NaCl-CaCl_2水溶液体系低温相变过程的X射线衍射法研究

本文使用低温X射线衍射法对不同浓度的LiCl、CaCl2和NaCl-CaCl2水溶液在降温过程中的相变情况进行了实时监测,获得了降温过程中的衍射图。结果显示,在快速降温的实验条件下,随温度降低,CaCl2溶液在-10～-60℃范围内析出冰或CaCl2·6H2O;LiCl溶液在5～-80℃范围内析出冰或LiCl·H2O;CaCl2-NaCl溶液在5～-40℃范围内析出CaCl2·6H2O或NaCl、冰。实验结果与相图的对比验证了这一实验方法的可行性。根据实验结果推断,本实验条件下固相可能先以无水盐的形式析出,而水合盐的形成则需要更长的平衡时间。本文的实验方法可为其他油田卤水子体系低温相平衡的研究提供有用信息,进而为油田水低温下结晶析盐规律的研究奠定基础。     

CXN天然沸石的研究Ⅳ.新型LiCl/H-STI主-客体材料的湿敏性能研究

用交流阻抗法研究自热扩散法制备的LiCl/H-STI主客体材料电导～湿敏性能,探讨客体负载量与材料湿敏性能之间的关系,材料的湿敏特性及其脱湿可逆性证明该材料具备实用性。     

CXN天然沸石的研究Ⅳ.新型LiCl/H-STI主-客体材料的湿 敏性能研究

用交流阻抗法研究自热扩散法制备的LiCl/H-STI主客体材料电导～湿敏性能,探讨客体负载量与材料湿敏性能之间的关系,材料的湿敏特性及其脱湿可逆性证明该材料具备实用性。     

氧化镍-铁酸锌复合薄膜/锡掺杂玻璃光波导传感元件的制备及其对硫化氢气体的气敏性

用溶胶-凝胶法制成了NiO掺杂的ZnFe2O4溶胶,并用浸渍提拉法将其固定在锡掺杂玻璃光波导表面,研制了NiO-ZnFe2O4复合薄膜/锡掺杂玻璃光波导气敏元件,并对无机有毒气体进行了检测。 实验结果表明,在室温下,该传感元件对H2S气体具有一定的选择性响应,而对相同浓度的其它无机气体的响应相对较小,能够检测到1.0×10-9（体积比）的H2S气体,其响应和恢复时间分别是6和8 s。 该元件具有灵敏度高、响应-恢复快、可逆性和重复性好、容易制备,在室温下便于操作等特点。     

超声喷雾共沉淀法制备纳米氧化锡粉体及其气敏性研究

采用超声波喷雾技术,以SnCl4·5H2O和CO(NH2)2为前驱体原料制备了氧化锡以及Ce稀土离子掺杂纳米粉体.详细地研究了超声喷雾条件、反应时间以及化学组分对纳米SnO2粉体的形貌和尺寸的影响规律,以及前驱体沉淀物脱水化学处理的条件.用XRD,TEM研究了所获纳米粒子的晶相和形貌.结果表明,制备的SnO2纳米粒子呈球状,尺寸在10～20 nm,纳米颗粒均匀,分散性好.以该粉体为基础制备了相应的气敏元件,测定了气体灵敏度与温度和稀土元素掺杂的关系.研究测试表明,纳米SnO2半导体气敏元件对NO2气体有着良好的响应-恢复特性,并且具有较高的灵敏度和较低的工作温度.稀土元素铈的掺杂能明显提高纳米SnO2粉体的气敏性能.     

盐/甲醇体系荧光光谱的分析和指认

研究了CaCl2、LiCl和Ca(NO3)2在甲醇溶液中的荧光光谱,并对溶液中可能的团簇构型采用密度泛函理论和含时(TD)密度泛函理论中的B3LYP方法进行结构优化和激发能计算.实验结果表明CaCl2和LiCl与甲醇形成了具有荧光性质的簇合物,且随着CaCl2和LiCl浓度的增加溶液的荧光强度整体呈增强趋势,而Ca(NO3)2与甲醇相互作用使甲醇发生荧光猝灭.理论计算得到盐/甲醇溶液中可能存在多种簇合物,但能使甲醇溶液荧光增强的团簇构型主要为[CaCl(CH3OH)n]+和LiCl(CH3OH)n,而NO3-与甲醇通过氢键作用形成簇合物的振荡强度几乎为零,解释了NO3-使甲醇发生荧光猝灭的现象.     

PVA薄膜光波导气敏元件及其应用研究

将纯聚乙烯醇(PVA)和掺有维生素C的PVA作为敏感试剂,通过旋转甩涂法分别研制出了PVA薄膜/锡掺杂玻璃光波导元件和VC-PVA薄膜/锡掺杂玻璃光波导元件并检测其气敏特性.实验结果表明,PVA薄膜/锡掺杂玻璃光波导元件对二甲苯气体有良好的选择性响应,其响应浓度范围为10-4～10-7(体积比);加入VC后,使此敏感元...     

Ce掺杂In_2O_3纳米纤维的制备及其三乙胺气敏性能(英文)

用简单有效的静电纺丝法制备了Ce掺杂的In2O3纳米纤维材料.采用X射线衍射(XRD)、透射电子显微镜(TEM)、高分辨率透射电子显微镜(HRTEM)和扫描电子显微镜(SEM)对合成样品的晶体结构和形貌进行了表征.结果显示,此纤维材料的平均直径约为90nm,长度达到几十个微米.气敏性能测试结果表明,4%(w)Ce掺杂的In2O3纳米纤维对三乙胺的灵敏度最高,该气敏元件对3μL·L-1三乙胺的灵敏度达到2.6,响应时间为5s,恢复时间约为6s,且具有较好的选择性.     

一种基于形成杂多核络合物的荧光增敏效应的研究 Ⅲ.锰(Ⅱ)、钴(Ⅱ)的混合荧光增敏及其连续测定

本文研究了Mn~(2+)和Co~(2+)对7-(8-羟基-3,6-二磺基萘偶氮)-8-羟基喹啉-5-磺酸-硼砂反应体系的混合荧光增敏作用。实验条件下,荧光增敏强度满足线性加和关系的范围是:Mn~(2+)浓度0～2.9×10~(-7)mol/L;Co~(2+)浓度0～8.8×10~(-7)mol/L;总浓度不超过1.0×10~(-6)mol/L。检出限量为Mn~(2+)4.5×10~(-9)mol/L和Co~(2+)1.4×10~(-8)mol/L。实现了Mn~(2+)和Co~(2+)的连续测定。     

Water-resistive humidity sensor prepared by printing process using polyelectrolyte ink derived from new monomer

A simple strategy was developed based on a new monomer containing both photocurable function and ammonium salt, N-(2-cinnamoyloxy)ethyl-N-(2-(methacryloyloxy)ethyl)-N,N-dimethyl ammonium bromide (CMDAB) to obtain photocurable polyelectrolyte ink and stable humidity-sensitive membranes by printing process. Humidity-sensitive membranes are photocrosslinked polyelectrolytes obtained from copolymers of [2-(methacryloyloxy)ethyl] dimethyl propyl ammonium bromide (MEPAB), CMDAB and MMA. A flexible gold electrode/polyimide was pretreated with 2-(mercaptoethyl) cinnamamide (MEC) containing a thiol-coupling agent for the purpose of anchoring the humidity-sensitive polyelectrolyte to the gold electrode. The sensors using screen printing methods reduced the deflection of sensor characteristics showing humidity precision ±1%RH. The photocured copolymer MEPAB/CMDAB/MMA = 63/7/30 show good sensitivity (0.0586 logΩ/%RH) changing resistance approximately four orders of magnitude with relative humidity varying from 20% to 95% and fast response and recovery time. The resultant sensors showed acceptable linearity (Y = -0.04X + 7.0, R(2) = -0.9900) and small hysteresis. The reliability including water resistance and a long-term stability were estimated for the application of the flexible humidity sensor prepared by screen printing process.     

Electrochemical and optical characterization of p- and n-doped poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene

We study electrochemical p- and n-type doping in the well-known light-emitting polymer poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV). Doping reactions are characterized using cyclic voltammetry. Optical measurements including photoluminescence and UV/Vis/NIR transmission were performed on doped samples. We find that oxidation in MEH-PPV is a highly reversible reaction resulting in stable freestanding doped films, while the reduced form is unstable and the reaction irreversible. We discuss the dependence of doping reactions on scan rate, film thickness, salt type and concentration, and working electrode type. We observe the development of two additional broad absorption bands in both lightly and heavily doped films accompanied by a slight blueshift in the primary optical transition, suggesting bipolaron band formation. Finally we find that both p and n dopings result in extremely sensitive photoluminescence quenching. We propose a physical model for understanding electrochemical doping in MEH-PPV and the implications this has on the development of such technologies as polymer light-emitting electrochemical cells, electrochromic devices, actuators, and sensors.     

Alkali metal salts doped pluronic block polymers as electron injection/transport layers for high performance polymer light-emitting diodes

A series of alkali metal salts doped pluronic block copolymer F127 were used as electron injection/transport layers (ETLs) for polymer light-emitting diodes with poly[2-(4-(3′,7′-dimethyloctyloxy)-phenyl)-p-phenylenevinylene] (P-PPV) as the emission layer. It was found that the electron transport capability of F127 can be effectively enhanced by doping with alkali metal salts. By using Li2CO3 (15%) doped F127 as ETL, the resulting device exhibited improved performance with a maximum luminous efficiency (LE) of 13.59 cd/A and a maximum brightness of 5529 cd/m2, while the device with undoped F127 as ETL only showed a maximum LE of 8.78 cd/A and a maximum brightness of 2952 cd/m2. The effects of the doping concentration, cations and anions of the alkali metal salts on the performance of the resulting devices were investigated. It was found that most of the alkali metal salt dopants can dramatically enhance the electron transport capability of F127 ETL and the performance of the resulting devices was greatly improved.     

钯纳米粒子修饰的三甲氧苄啶分子印迹膜传感器的制备及其识别性能研究

采用N,N′-亚甲基双丙烯酰胺(MBA)为功能单体、钯纳米粒子为掺杂剂、马来松香丙烯酸乙二醇酯为交联剂,在玻碳电极上热聚合具有三甲氧苄啶(TMP)识别性能的钯纳米材料修饰的分子印迹传感膜.采用扫描电镜及红外光谱对合成的钯纳米材料、印迹传感膜的形貌及其结构进行了表征;采用循环伏安法(CV)、交流阻抗法(EIS)对钯纳米粒子掺杂的印迹电极与无掺杂电极的电化学性能进行了研究.结果表明,纳米粒子掺杂的印迹电极与无掺杂电极的表面形貌及电化学性能明显不同.差分脉冲伏安法(DPV)表征结果表明,TMP的浓度在5.0×10-7~4.0 ×10-3 mol/L范围内与脉冲峰电流呈良好的线性关系(R=0.9995),检出限为3.2×10-8 mol/L (S/N=3).此钯纳米粒子掺杂的印迹传感器具有较高的灵敏度.即时电流测定结果表明,新诺明(SMZ)、磺胺嘧啶(SDZ)、葡萄糖 (Glu)、尿素 (Urea)对三甲氧苄啶(TMP)的测定不产生干扰.将此印迹传感器用于实际样品中TMP的检测,加标回收率为96.8%~102.0%.     

Crosslinked and quaternized poly(4-vinylpyridine)/polypyrrole composite as a potential candidate for the detection of low humidity

Poly(4-vinylpyridine) was crosslinked and quaternized with 1,4-bromobutane to form a polyelectrolyte humidity sensitive film on an interdigitated gold electrode, which was further coated with a layer of polypyrrole by a facile method of vapor phase polymerization. The composite so prepared was characterized by UV-vis spectroscopy and scanning electron microscopy. The investigations on the humidity sensitive properties of the composite revealed that it exhibited an impedance as low as 10(5) Omega even at 0%RH due to the existence of intrinsic conducting polypyrrole, thus conquering the difficulties in measuring low humidity with resistive-type humidity sensors. The impedance of the composite changed linearly with humidity in the range of 0-60%RH with good sensitivity. In addition, its response time (t(90%)) for adsorption and desorption between 33% and 97%RH was estimated to be 33 s and 110 s, respectively, and a hysteresis of 5%RH was observed. All these suggest it is promising as a sensitive material for low humidity detection. The effect of concentration and ratio of oxidizing agent to doping agent, polymerization temperature of pyrrole on the humidity sensitive properties of the composite have been investigated. A sensitive mechanism of the composite was proposed by taking into account the contribution of both the intrinsic electronic conduction and ionic conduction.     

纳米晶LaCoxFe1-xO3的合成、表征及湿敏特性

采用PEG溶胶-凝胶法合成了纳米晶LaCoxFe1-xO3, 并用DTA-TGA、XRD以及SEM对样品进行表征. 结果表明, 所有样品的原粉在600 ℃焙烧下都形成了稳定的钙钛矿纳米晶, Co含量对形成纳米晶的固相反应和纳米晶的平均粒子尺寸都有明显的影响. 此外, 还研究了纳米晶LaCoxFe1-xO3的湿敏特性, 发现在所有的样品中, LaCo0.3Fe0.7O3表现出比其它样品好的湿敏特性, 但是此材料只在相对湿度(RH)大于54%时对湿度的变化有较高的灵敏度, 掺杂适量的Na2CO3可以改善此材料的湿敏特性, 使它在全程湿度范围(RH 11%-95%)内对湿度变化都有很好的响应.     

2,5-二辛氧基聚对苯的合成及表征

蓝色电致发光;2;5-二辛氧基聚对苯的合成及表征     

LiCl/NaY主客体复合材料的制备及其湿敏性质

利用热分散法将LiCl分散到NaY分子筛笼形孔道内制备了LiCl/NaY主客体湿敏材料,该材料保持了LiCl体相材料优良的湿敏特性,同时由于分子筛孔道的限域作用及LiCl盐与分子筛载体间的强离子键合作用,克服了LiCl体相材料的某些固有缺陷.分子筛结构对这种主客体材料有很大影响,具有笼形三维孔道结构的分子筛如NaY更适于作主体材料.二维孔道型的ZSM-5及一维直孔道的丝光沸石则效果差得多.     

导电高聚物的EXAFS研究(Ⅱ)FeCl3掺杂的聚噻吩

Fe K absorption spectra of an electrically conductive polymer——FeCl_3-doped polythiophene and model compound [N(C_2H_5)_4][FeCl_4] were measured with a laboratory EXAFS system, which utilizes a high power rotating-anode X-ray generator (Rigaku model RU-1000) as a X-ray source. The analysis of observed EXAFS data shows that Fe atom is surrounded by four Cl atoms with Fe-Cl distance of 2.19. It is concluded that the dopant exists mainly in the form of FeCl_4~-. The result provides a direct structural information that strongly supports the proposition: the doping process is as follows2FeCl_3+e~-→FeCl_4~-+FeCl_2