W/O/W多重乳液中水传递的控制

建立了简化的W/O/W(水/油/水)多重乳液乳珠模型——统计平均半径模型, 预测出当W/O/W多重乳液内水相水滴之间以及内外水相之间均达到水传递平衡时的内外水相中盐的浓度, 从而实现对水传递的控制, 以维持W/O/W多重乳液的稳定. 按理论预测制备出了不同稳定态的W/O/W多重乳液, 利用差分扫描量热仪(DSC)检测了多重乳液中水的传递过程, 确定体系在实验状态下的稳定程度, 实验结果与理论预测基本吻合.     

Effects of compositions on the stability of polyols-in-oil-in-water (P/O/W) multiple emulsions

Polyols-in-oil-in-water (P/O/W) multiple emulsions were successfully prepared by using polyols as inner aqueous phase to avoid instabilities caused by water. The influence of polyols, oils and emulsifiers on the morphology and stability of P/O/W multiple emulsions were studied and the stability mechanisms of this new kind of multiple emulsions were also explored. Glycerol that has the worst solubility in oil phase contributed to the formation of stable inner droplets which agree with the Ostwald Ripening theory. Mineral oil worked well with the system proving that oils possessing similar solubility parameters with the hydrophobic group of emulsifiers benefited for system stability. Several typical surfactants had been investigated in this article, and it turned out that emulsifiers Cetyl PEG/PPG-10/1 Dimethicone and the block copolymer Poloxamer 407 were suitable for the P/O/W system. The stability of the system affected by different compositions was evaluated based on microscopic observation and rheological measurements. The novel multiple emulsions will provide enlightening recommendations for future investigations and applications in cosmetic, food and pharmaceuticals, including drug delivery and the encapsulation of hydrophilic actives and actives that are soluble in polyols.     

Preparation and characterization of W/O/W double emulsions containing MgCl2

The aim of present study is to design food-grade W/O/W double emulsions encapsulating Mg²⁺ and investigate their stability and release properties. Prepared emulsions were characterized in terms of global stability, particle size, rheological properties, and interfacial tension. The double emulsions were sensitive to the presence of magnesium salt. The mean droplet size and viscosity of emulsions was positively correlated to MgCl₂ concentration. The microscopic pictures confirmed that the water transfer between two aqueous phases caused the reduced stability of double emulsions. It was suggested that swelling breakdown was the main mechanism in controlling the release of encapsulated Mg²⁺.     

Effect of Emulsifier Type on the Characterization of O/W Emulsions Using a Spectroscopy Technique

The droplet size distribution (DSD) of emulsions is the result of two competitive effects that take place during emulsification process, i.e., drop breakup and drop coalescence, and it is influenced by the formulation and composition variables, i.e., nature and amount of emulsifier, mixing characteristics, and emulsion preparation, all of which affect the emulsion stability. The aim of this study is to characterize oil-in-water (O/W) emulsions (droplet size and stability) in terms of surfactant concentration and surfactant composition (sodium dodecyl benzene sulphonate (SDBS)/Tween 80 mixture). Ultraviolet-visible (UV-vis) transmission spectroscopy has been applied to obtain droplet size and stability of the emulsions and the verification of emulsion stability with the relative cleared volume technique (time required for a certain amount of emulsion to separate as a cleared phase). It is demonstrated that the DSD of the emulsions is a function of the oil concentration and the surfactant composition with higher stability for emulsions prepared with higher SDBS ratio and lower relative cleared volume with the time. Results also show that smaller oil droplets are generated with increasing Tween 80 ratio and emulsifier concentration.     

Water mass transfer in W/O emulsions

Water transportation through the oil phase in W/O emulsions and in W1/O/W2 systems (W/O emulsion in contact with water) was examined. Substance diffusion through interfaces led to interface instability and spontaneous emulsification which caused nanodispersion formation. The photomicrographs of Pt/C replicas of emulsions showed the presence in the continuous oil phase a lot of nanodispersion droplets with a diameter in the range 17-25 nm. Diffusion coefficient (D) of water calculated on the base of Lifshiz-Slezov-Wagner (LSW) equation was about 15 times lower than the coefficients of molecular diffusion. Since such emulsions were extremely unstable toward coalescence, the growth of water droplets took place through as Ostwald ripening as coalescence. In three-phase W1/O/W2 systems diffusion of water, Rhodamine C, and ethanol was studied. D calculated on the base of the equation of nonstationary diffusion were approximately 1000 times lower than molecular ones. It was assumed, that nanodispersion droplets were more likely water carriers in investigated W/O emulsions stabilized by sorbitan monooleate.     

Emulsifying potency of new amino acid-type surfactant (II): stable water-in-oil (W/O) emulsions containing 85 wt% inner water phase

The ternary phase diagram for N-[3-lauryloxy-2-hydroxypropyl]-L-arginine L-glutamate (C12HEA-Glu), a new amino acid-type surfactant, /oleic acid (OA)/water system was established. The liquid crystal and gel complex formations between C12HEA-Glu and OA were applied to a preparation of water-in-oil (W/O) emulsions. Stable W/O emulsions containing liquid paraffin (LP) as the oil and a mixture of C12HEA-Glu and OA as the emulsifier were formed. The preparation of stable W/O emulsions containing 85 wt% water phase was also possible, in which water droplets would be polygonally transformed and closely packed, since the maximum percentage of inner phase is 74% assuming uniformly spherical droplets. Water droplets would be taken into the liquid crystalline phase (or the gel complex) and the immovable water droplets would stabilize the W/O emulsion system. The viscosity of emulsions abruptly increased above the 75 wt% water phase (dispersed phase). The stability of W/O emulsions with a lower weight ratio of OA to C12HEA-Glu and a higher ratio of water phase was greater. This unusual phenomenon may be related to the formation of a liquid crystalline phase between C12HEA-Glu and OA, and the stability of the liquid crystal at a lower ratio of oil (continuous phase). W/O and oil-in-water (O/W) emulsions containing LP were selectively prepared using a mixture of C12HEA-Glu and OA since the desirable hydrophile-lipophile balance (HLB) number for the emulsification was obtainable by mixing the two emulsifiers.     

Improved formulation of W/O/W multiple emulsion for insulin encapsulation. Influence of the chemical structure of insulin

W/O/W multiple emulsions are systems of potential interest in the oral administration of insulin. Although it has been shown that a single oral administration of insulin-loaded W/O/W multiple emulsion to diabetic rats led to the significant decrease of blood glucose levels (Silva Cunha et al., 1998, Int J Pharm 169:33), repeated administrations displayed unpleasant side effects such as diarrhoea and steatosis. These unwanted effects were attributed to the high oil concentration used for their preparation. In the present study, attention was focused on the reduction of oil concentration in the formulation of these systems and on the encapsulation of two different insulins. The physical properties and stability of the multiple emulsions over long periods of time were assessed by conductivity measurements, and granulometric and microscopic analyses. The encapsulation in the inner aqueous phase of two insulins, Umulin and Humalog, differing only by the transposition of one amino acid, had non-negligible effects on the formation and stability of W/O/W multiple emulsions. Both insulins were shown to improve the formation of the multiple emulsions. Circular dichroism studies and surface tension measurements evidenced the contribution of insulin conformation and surface properties in multiple emulsion formation and stability.     

Encapsulation and Prolonged Release Behaviour of W/O/W Type Multiple Emulsions

W/O/W type multiple emulsions were prepared by two step emulsification procedures using an oily lymphographic agent, lipiodol, as an inner oil phase and Pluronic F-68 as a hydrophilic emulsifier contained in the outer aqueous phase. Span 80, Pluronic L-64 and HCO-60 were used as emulsifiers incorporating them into the inner oil phase. The phase volume of the inner and outer aqueous phases and the yield of the w/o/w type multiple emulsions were studied. The dissolution behaviour of the w/o/w type multiple emulsions were determined by a dialysis method employing cellulose tubing. The effect of emulsifier type and the amount of HCO-60 on the stability and prolonged release behavior of the w/o/w type multiple emulsions with or without lecithin, was also examined. The results indicate the HCO-60 is a better emulsifier than Span 80 or Pluronic L-64. Its use improves the stability and the prolonged release behavior of w/o/w type multiple emulsions.     

Influence of composition on the encapsulation properties of P/O/W multiple emulsions for Vitamin C

Abstract

The aim of this work was to study the encapsulation properties of polyols-in-oil-in-water (P/O/W) multiple emulsions for Vitamin C (Vc). The influence of formulation factors, including the concentration of lipophilic emulsifier, hydrophilic emulsifier, salt and glycerol had been investigated. The results indicated that the encapsulation stability could be improved by increasing the lipophilic emulsifier concentration which could strengthen the interfacial film. In contrast, the excess of hydrophilic emulsifier destabilized the emulsion. The presence of glycerol in the outer aqueous phase accelerated the phase transfer, thus reduced the encapsulation rate. The addition of salt in inner polyols phase had little effect on encapsulation rate while markedly affected the morphology and stability of this system. P/O/W multiple emulsions showed better encapsulation stability than the W/O/W multiple emulsions as the former’s encapsulation rate could remain more than 75% after 2?weeks while the latter only remained less than 60%. Meanwhile, the P/O/W emulsions exhibited higher storage modulus (G’), bigger loss modulus (G’’) and broaden linear viscoelastic regions than W/O/W emulsions.     

Multiple emulsion stability: pressure balance and interfacial film strength

The objective of this study was to investigate the significance of inner and outer phase pressure, as well as interfacial film strength on W/O/W multiple emulsion stability using microscopy and long-term stability tests. It was observed that immediately upon applying a coverslip to samples the multiple droplets deformed and there was coalescence of the inner aqueous droplets. Under certain conditions (such as lipophilic surfactant concentration and internal phase osmotic pressure) the destabilized multiple emulsions formed unique metastable structures that had a "dimpled" appearance. The formation of these metastable structures correlated with the real-time instability of the W/O/W multiple emulsions investigated. Multiple emulsion stability also correlated with the interfacial film strength (measured by interfacial elasticity) of the hydrophobic surfactant at the mineral oil/external continuous aqueous phase interface. The formation of the metastable dimpled structures and the long-term stability of the multiple emulsions were dependent on the osmotic pressure of the inner droplets and the Laplace curvature pressure as described by the Walstra Equation (P. Walstra, "Encyclopedia of Emulsion Technology" (P. Becher, Ed.), Vol. 4. Dekker, New York, 1996). It appears that the effect of coverslip pressure on multiple emulsions may be useful as an accelerated stability testing method or for initial formulation screening.     

Three-dimensional molecular mapping of a multiple emulsion by means of CARS microscopy

Multiple emulsions consisting of water droplets dispersed in an oil phase containing emulsifier which is emulsified in an outer water phase (W/O/W) are of great interest in pharmacology for developing new drugs, in the nutrition sciences for designing functional food, and in biology as model systems for cell organelles such as liposomes. In the food industry multiple emulsions with high sugar content in the aqueous phase can be used for the production of sweets, because the high sugar content prevents deterioration. However, for these emulsions the refractive indexes of oil and aqueous phase are very similar. This seriously impedes the analysis of these emulsions, e.g., for process monitoring, because microscopic techniques based on transmission or reflection do not provide sufficient contrast. We have characterized the inner dispersed phase of concentrated W/O/W emulsions with the same refractive index of the three phases by micro Raman spectroscopy and investigated the composition and molecular distribution in water-oil-water emulsions by means of three-dimensional laser scanning CARS (coherent anti-Stokes Raman scattering) microscopy. CARS microscopy has been used to study water droplets dispersed in oil droplets at different Raman resonances to visualize different molecular species. Water droplets with a diameter of about 700 nm could clearly be visualized. The advantages of CARS microscopy for studying this particular system are emphasized by comparing this microscopic technique with conventional confocal reflection and transmission microscopies.     

Stabilization of Water‐Soluble Antioxidant in Water‐in‐Oil‐in‐Water Double Emulsions

Abstract

In this study, we are introducing a method that can effectively stabilize antioxidants in water‐in‐oil‐in‐water (W/O/W) double emulsions. Preliminarily, stable W/O/W double emulsions were produced by manipulating the characteristics of internal aqueous phase via two‐stage emulsification, resulting consequently in the formation of fine internal water droplets in the dispersed oil droplets. From conductivity measurements that can determine the elution amount of internal aqueous phase, it was confirmed that the double emulsion stability could be improved by treating the internal aqueous phase with a hydroxypropyl‐beta‐cyclodextrin. In this study, kojic acid, 5‐hydroxy‐2‐(hydroxymethyl)‐4‐pyrone was selected as a model antioxidant. The stabilization of kojic acid was attempted by locating it in the internal water droplets of the stable W/O/W double emulsions. The stability of kojic acid in the double emulsion system could be maintained at 90% for 10 weeks at high temperature. We believe that these stable W/O/W double emulsions could be used meaningfully as a carrier for many unstable antioxidants.     

Controllable gas/liquid/liquid double emulsions in a dual-coaxial microfluidic device

This article presents a simple and novel approach to prepare monodispersed gas-in-oil-in-water (G/O/W) and gas-in-water-in-oil (G/W/O) double-emulsions in the same dual-coaxial microfluidic device. The effects of three phase flow rates on the sizes of microbubbles and droplets and the number of the encapsulated microbubbles were systematically studied. We successfully synthesized two different types of gas/liquid/liquid (G/L/L) double emulsions with different inner structures in the same geometry by adjusting the flow rates sequentially. Mathematical models were developed to predict the size and structures of the double emulsions. This simple approach gives a new idea for preparing hollow and porous microspheres with microbubbles as the direct core/pores templates.     

Phase transitions and microstructure of emulsion systems prepared with acylglycerols/zinc stearate emulsifier

The emulsification processes, during which acylglycerols/zinc stearate emulsifier, water, and oil phase formed ternary systems, such as water-in-oil (W/O) emulsions, oil-in-water (O/W) dispersions, and unstable oil-water mixtures, were investigated in order to characterize the progressive transformations of the dispersed systems. The type, structure, and phase transitions of the systems were found to be determined by temperature and water phase content. Crystallization of the emulsifier caused the destabilization and subsequent phase inversion of the emulsions studied, at a temperature of 60-61 degrees C. The observed destabilization was temporary and led, at lower temperature, to W/O emulsions, "O/W + O" systems, or O/W dispersions, depending on the water content. Simultaneous emulsification and cooling of 20-50 wt % water systems resulted in the formation of stable W/O emulsions that contained a number of large water droplets with dispersed oil globules inside them ("W/O + O/W/O"). In water-rich systems (60-80 wt % of water), crystallization of the emulsifier was found to influence the formation of crystalline vesicle structures that coexisted, in the external water phase, with globules of crystallized oil phase. Results of calorimetric, rheological, and light scattering experiments, for the O/W dispersions obtained, indicate the possible transition of a monostearoylglycerol-based alpha-crystalline gel phase to a coagel state, in these multicomponent systems.     

Interface composition of multiple emulsions: rheology as a probe

We have investigated the dynamic rheological properties of concentrated multiple emulsions to characterize their amphiphile composition at interfaces. Multiple emulsions (W1/O/W2) consist of water droplets (W1) dispersed into oil globules (O), which are redispersed in an external aqueous phase (W2). A small-molecule surfactant and an amphiphilic polymer were used to stabilize the inverse emulsion (W1 in oil globules) and the inverse emulsion (oil globules in W2), respectively. Rheological and interfacial tension measurements show that the polymeric surfactant adsorbed at the globule interface does not migrate to the droplet interfaces through the oil phase. This explains, at least partly, the stability improvement of multiple emulsions as polymeric surfactants are used instead of small-molecule surfactants.     

Polyols,High Pressure,and Refractive Indices Equalization for Improved Stability of W/O Emulsions for Food Applications

Mixtures of polyols (glycerol, propylene glycol, glucose) and water were emulsified in oil (isopropyl myristate (IPM), medium chain triglycerides (MCT), long chain triglycerides (LCT), and d-limonene) under elevated pressures and homogenization, in the presence of polyglycerol polyricinoleate (PGPR), glycerol monooleate (GMO), and their mixture as emulsifiers to form water-in-oil emulsions. High pressures was applied to: a) the emulsion, b) the aqueous phase and c) the oil phase in the presence of the emulsifiers (PGPR and GMO). Under optimal pressure (2000 atms) applied to the ready-made emulsion or to the aqueous phase prior to its emulsification, and with optimal composition (30wt% polyol in the aqueous phase and MCT as the oil phase), the aqueous droplets were stable for months and submicron in size (0.1 μm). Moreover, due to equalization of the oil and the aqueous phases refractive indices, the emulsions were almost transparent. Pressure and polyols have synergistic effects on the emulsions stability. During preparation, surface tensions and interfacial tensions were dramatically reduced until an optimal water/polyols ratio was achieved, which allows rupturing of the droplets to submicronal size (0.1 μm) without recoalescence and fast diffusion to the interface. These unique W/O emulsions are suitable for preparing W/O/W double emulsions for sustained release of active materials for food applications.     

Development of a method to determine the SFC in the fat phase of emulsions using TD-NMR FID-CPMG deconvolution

Fat crystallisation in emulsions is a complex process. One of the important parameters is the solid fat content (SFC). Up to now, there is no standardised method to measure the SFC in emulsions, let alone to determine the SFC of the fat inside droplets, thus avoiding the signal of the aqueous phase. This work evaluates the capabilities of deconvolution of the free induction decay (FID)-Carr–Purcell–Meiboom–Gill (CPMG) signal of emulsions. Three models were evaluated. The first model was a combination of a Gaussian function and a bi-exponential function (GBE model). The second model combined a Gaussian function with multiple exponential functions (GME model). The last model contained multiple Gaussian functions and multiple exponential functions (MGME model). The latter two models used a simplified CONTIN analysis. Based on the analysis of the determination coefficient R², the calculated water content and the estimated SFC of nonemulsified two-phase systems, the GBE model was selected to analyse the FID-CPMG signal of emulsified systems. However, the results obtained with the other models did not differ substantially, and hence, they could be used to obtain a full relaxation time distribution. When the GBE model was applied on different emulsion systems, no significant differences in estimated SFC of the fat phase were found, thus indicating that the emulsion formulation (i.e. water-in-oil [W/O], oil-in-water [O/W] or water-in-oil-in-water [W/O/W]) only had a minor effect on the SFC in the systems considered here.     

Preparation of highly monodisperse W/O emulsions with hydrophobically modified SPG membranes

Experimental investigations on the hydrophobic modification of SPG membranes and the preparation of monodisperse W/O (water-in-oil) emulsions using the modified membranes were carried out. Effects of the osmotic pressure of disperse phase, the average pore size of membranes, emulsifier concentrations in continuous phase and the transmembrane pressure on the average size, size distribution and size dispersion coefficient of emulsions were systematically studied. The stability of W/O emulsions was also investigated. The results showed that SPG membranes took on excellent hydrophobicity through the modification by silane coupler reagent (octyltriethoxysilane) or by silicone resin (polymethylsilsesquioxane). Monodisperse W/O emulsions with size dispersion coefficient of about 0.25, which meant high monodispersity, were successfully prepared by using the hydrophobically modified SPG membranes with average pore sizes of 1.8, 2.0, 2.5, 4.8 and 11.1 microm. When the osmotic pressure was lower than 0.855 MPa, the average size of emulsions was gradually increased while the size dispersion coefficient delta gradually decreased with the osmotic pressure; when the osmotic pressure was higher than 0.855 MPa, both the coefficients kept unvarying. When kerosene was saturated with disperse phase in advance, the average size of emulsions became larger and the monodispersity of emulsions was slightly better than that prepared using unsaturated kerosene. The smaller the pore size of SPG membranes was, the better the monodispersity of the W/O emulsions. The average size and size dispersion coefficient delta were nearly independent on the emulsifier concentrations when the PGPR concentration was in the range from 0.5 to 5.0 wt%, whereas both of them slightly increased as the PGPR concentration was below 0.5 wt%. The effect of the transmembrane pressure on size distributions was slight. Both the average size and size dispersion coefficient delta slightly increased to some extent with the increase of the transmembrane pressure in the experimental range. The stability of the W/O emulsions was dependent on the storage time. The mean size of W/O emulsions decreased gradually with the increase of storage time at the first 35 days, and then kept constant; while the size dispersion coefficient of W/O emulsions was nearly not changed.     

Fractional crystallization of oil droplets in O/W emulsions dispersed by Synperonic F127

The aim of this works is to study an oil-in-water emulsion stabilized with a triblock copolymer Synperonic F127 which presents a double size distribution of oil droplets. The emulsions were studied experimentally by means of differential scanning calorimetry (DSC) and dynamic light scattering (DLS). The DSC analysis was carried out focusing on the cooling behavior of the emulsion. The cooling thermograms of the oil-in-water emulsion revealed two crystallization peaks with Gaussian profile; the interesting characteristic is that both peaks are separated in temperature. In accordance to previous works for a single oil dispersed within an aqueous phase, the DSC technique must show a single Gaussian peak of crystallization attributable to a size distribution of droplets. In the present case of emulsions stabilized with 1 g/L of Synperonic F127, the aggregation behavior of triblock as a function of temperature allows to produce an emulsion with a double size droplet distribution. Comparison with emulsions stabilized with 2 and 4 wt% of non-ionic Tween 20 are also presented.