聚环氧氯丙烷聚氨酯／聚（甲基丙烯酸甲酯－苯乙烯）IPN的研究

改变聚（甲基丙烯酸甲酯－苯乙烯）（Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）中甲基丙烯酸甲酯的含量（Ｗ_（ＭＭＡ）），通过一步法合成出聚环氧氯丙烷聚氨酯（ＰＵ（ＰＥＣＨ）／Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）ＩＰＮ．ＤＳＣ、ＴＥＭ和动态粘弹谱研究结果表明：当Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）中Ｗ_（ＭＭＡ）大于０．６时，ＩＰＮ仅有一个Ｔｇ；当Ｗ_（ＭＭＡ）小于０．４时，ＩＰＮ有２个Ｔ_ｇ，ＴＥＭ上出现相区，Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）溶度参数（δ）及δ的氢键作用分量（δｈ）与相态、力学性能有密切关系。     

聚环氧丙烷聚氨酯／聚（甲基丙烯酸甲酯—苯惭烯）IPN的研究

改变聚（甲基丙烯酸甲酯－苯乙烯（Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）中 甲基丙烯酸甲酯的含量（ＷＭＭＡ），通过一步法合成出聚环氧氯丙烷聚氨酯（ＰＵ（ＰＥＣＨ）／Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）ＩＰＮ．ＤＳＣ、ＴＥＭ和动态粘弹谱研究结果表明：当Ｐ（ＭＭＡ＿ｃｏ－Ｓｔ）中ＷＭＭＡ大于０．６时，ＩＢＮ仅有一个Ｔｇ；当ＷＭＭＡ小于０．４时，ＩＰＮ有２个Ｔｇ，ＴＥＭ上出现相区，Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）深度参数（δ）及δ的氢键作     

尼龙6/多单体接枝聚丙烯共混物的形态结构及力学性能的研究

用多组分熔融接枝的方法将甲基丙烯酸缩水甘油酯（ Ｇ Ｍ Ａ） 和苯乙烯（ Ｓｔ） 共同接枝于聚丙烯（ Ｐ Ｐ） 上,制得多单体接枝聚丙烯 Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ） ．该接枝物具有高的 Ｇ Ｍ Ａ 接枝率．本研究利用 Ｆ Ｔ Ｉ Ｒ、 Ｓ Ｅ Ｍ、 Ｔ Ｅ Ｍ、 Ｄ Ｓ Ｃ 和力学性能测试等分析方法,研究了多组分熔融接枝聚丙烯（ Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ）） 对尼龙６／ Ｐ Ｐ 共混物的形态结构, Ｔｇ 和力学性能的影响．结果表明, Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ） 中的环氧基团与尼龙６（ Ｐ Ａ６） 末端的胺基发生化学反应,原位形成的 Ｐ Ｐ Ｐ Ａ６ 共聚物能有效的改善 Ｐ Ａ６ 与 Ｐ Ｐ 的相容性,可以使 Ｐ Ｐ 均匀的分散在 Ｐ Ａ６ 基体中,相区尺寸明显减小,提高了拉伸强度．由于两相的相容性较好,从而共混物的 Ｔｇ 有明显的变化．此外,通过透射电镜观察,发现 Ｐ Ａ６／ Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ）（７０／３０） 合金中存在着特殊的微相分离结构．     

苯乙烯与D—120共聚物的性能研究

合成了侧基含有过氧键的苯乙烯－Ｄ－１２０共聚物（Ｐｏｌｙ（Ｓｒ－ｃｏ－Ｄ－１２０）ＰＳＤ）。用ＩＲ、ＧＰＣ进行了表征。用ＤＳＣ、ＧＰＣ、ＴＧＡ探讨了共聚物的热稳定性及分解机理，并对其就地增容ＰＳ／ＬＤＰＥ共混体系进行了初步研究。结果表明：共聚物中过氧键浓度越大，其起始分解温度越低，降解越严重，该共聚物可作为ＰＥ／ＰＳ共混体系的就地增容剂。     

嵌段—接枝共聚物SPEG与PS（OH）之间的氢键络合导致胶束化的研究

利用原子转移自由基聚合反应合成了以聚苯乙烯－ｂ－聚（乙烯－ｃｏ－丙烯）（ＳＥＰ）为主链、无规分布且数目可控的聚甲基丙烯酸乙酯（ＰＥＭＡ）为支链的嵌段接枝共聚物ＳＰＥＧ,发现在甲苯中因支链ＰＥＭＡ与聚（苯乙烯－ｃｏ－对六氟丙基－α－甲基苯乙烯）「简称ＰＳ（ＯＨ）」的氢键络合作用和ＥＰ嵌段的溶解作用导致了聚集体的胶束化,研究了胶束的尺寸及其分布对ＰＳ（ＯＨ）中羟基含量和共混物组成的依赖性。     

SLS存在下meso-四(对三甲胺基苯基)卟啉测定微量铜

研究了表面活性剂十二烷基苯磺酸钠存在时,ｍｅｓｏ－四（对三甲基苯基）卟啉「Ｔ（４－ＴＭＡＰ）Ｐ」与铜的显色反应。在ｐＨ＝３．７的ＨＡｃ－ＮＡａｃ介质中,在ＳＬＳ眄,铜与「Ｔ（４－ＴＭＡＰ）Ｐ」形成１：２的稳定配合物,至少在４．５ｈ内吸光度无变化。最大吸收波长位于４１０ｎｍ,ε＝３．７９×１０＾５Ｌ．ｍｏｌ＾０－１．ｃｍ＾－１。     

4—（6—甲基—2—苯并噻唑偶氮）间苯三酚反相高效液相色谱分离测定钒钴镍铬

作以新研制的４－（６－甲基－２－苯并噻唑偶氮）间苯三酚为柱前衍生试剂，用含１０ｍｍｏｌ／Ｌ的ｐＨ６．８０的ＨＡｃ－ＮａＡｃ缓冲溶液，１０ｍｍｏｌ／Ｌ ＴＢＡ．Ｂｒ和１×１０＾－４ｍｏｌ／ＬＥＤＴＡ的甲醇－水溶液（７８：２２，Ｖ／Ｖ）作流动相，在Ｃ１８柱上，１１ｍｉｎ内反相ＨＰＬＣ分离测定了Ｃｒ（Ⅵ），Ｖ（Ⅴ），Ｃｏ（Ⅱ），Ｎｉ（Ⅱ）。当Ｓ／Ｎ＝３时，其检出限分别是Ｖ（Ⅴ）５．４５ｎｇ，Ｃｏ（Ⅱ）     

双金属杂原子分子筛CrCoBEA的合成、波谱及催化性能研究

采用水热晶化法首次合成出ＢＥＡ结构含铬、钴，双金属杂原子分子筛ＣｒＣｏＢＥＡ，对晶化时间，晶化温度，成胶配比等合成条件进行了优化研究，采用ＸＲＤ，ＦＴＩＲ，ＵＶ－ＶｉｓＤＲＳ，ＥＳＲ及催化反应等方法测试其物相、波谱性质和催化性能，结果表明物质的量比为ＴＥＯＳ：０．０１７「Ｃｒ（ａｃａｃ）３」：０．０１７「Ｃｏ（ａｃａｃ）３」：（０．５８－０．６４）ＴＥＡＯＨ：０．０１Ａｌ（ＮＯ３）３：（１６－２０     

新型五甲基茂基三苄氧基钛／甲基铝氧烷催化剂合成苯乙烯—乙烯共聚？…

以五甲基茂基三苄氧基钛〔Ｃp＊Ｔi（ＯＢz）３〕和甲基铝氧烷（ＭＡＯ）组成的催化体 用本体法合成出苯乙烯－乙烯共聚物Ｐoly（Ｓ－ｃｏ－Ｅ）。考察了共聚温度,共聚时间 ,Ａ１／Ｔi摩尔比,主催化剂浓度〔Ｔi〕等条件对共聚反应的影响。共聚产物经沸丁酮,沸四氢呋喃（ＴＨＦ）连续抽提分离,发现共聚物主要存在于ＴＨＦ可溶级分中。可溶级分经ＤＳＣ,＾１３Ｃ－ＮＭＲ,ＷＡＸＤ,ＤＭＡ等手段分析,证明苯乙烯－乙烯共聚物为     

乙烯系单体自由基聚合的阻聚效应──XIX．取代哌啶羟胺和二叔丁基羟胺及其稳定自由基对苯乙烯－丙烯腈共聚合的影响

研究了二叔丁基羟胺（ＤＴＢＨＡ），二叔丁基氮氧自由基（ＤＴＢＮＯ），２，２，６，６－四甲基－４－羟基哌啶羟胺（ＴＭＨＰＨＡ）和２，２，６，６－四甲基－４－羟基哌啶－１－氧自由基（ＴＭＨＰＯ）对过氧化苯甲酰（ＢＰＯ）６０℃引发的苯乙烯（Ｍ１）－丙烯腈（Ｍ２）共聚合的阻聚物行为。结果表明，这些阻聚剂对Ｓｔ－ＡＮ共聚均表现良好的阻聚行为，其中氮氧自由基优于相应羟胺。同时观察到Ｓｔ－ＡＮ竞聚率的改变，羟胺     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.