Rapid and sensitive quantification of urinary N7-methylguanine by isotope-dilution liquid chromatography/electrospray ionization tandem mass spectrometry with on-line solid-phase extraction

A rapid, highly specific and sensitive isotope-dilution liquid chromatography/tandem mass spectrometry (LC/MS/MS) method coupled with an on-line solid-phase extraction (SPE) system was developed to measure N7-methylguanine (N7-MeG) in urine. 15N5-Labeled N7-MeG was synthesized to serve as an internal standard, and an on-line SPE cartridge was used for on-line sample cleanup and enrichment. The urine sample can be directly analyzed within 15 min without prior sample purification. The detection limit for this method was estimated as 8.0 pg/mL (4.8 pmol) on-column. This method was further applied to study exposure to methylating agents arising from cigarette smoke. Sixty-seven volunteers were recruited, including 32 regular smokers and 35 nonsmokers. Urinary cotinine, a major metabolite of nicotine, was also determined using an isotope-dilution LC/MS/MS method. The results showed that urinary levels of N7-MeG observed in smokers (4215 +/- 1739 ng/mg creatinine) were significantly (P < 0.01) higher than those in nonsmokers (3035 +/- 720 ng/mg creatinine). It was further noted that the urinary level of N7-MeG was found to be correlated with that of cotinine for smokers, implying that cigarette smoking resulted in increased DNA methylation, followed by depurination and excretion of N7-MeG in urine. As a result of the on-line extraction system, this method is capable of routine high-throughput analysis and accurate quantitation of N7-MeG, and could be a useful tool for health surveillance of methylating agent exposure.     

Comparison of analyses of urinary 8-hydroxy-2'-deoxyguanosine by isotope-dilution liquid chromatography with electrospray tandem mass spectrometry and by enzyme-linked immunosorbent assay

A highly sensitive and selective method, using isotope-dilution liquid chromatography with tandem mass spectrometry (LC/MS/MS), for quantification of urinary 8-hydroxy-2'-deoxyguanosine (8-OHdG), an important biomarker of oxidative stress, was developed and compared with a method using an enzyme-linked immunosorbent assay (ELISA). The synthesis of (15)N(5)-8-OHdG is described. In this study, 140 urine samples were collected from workers in a coke oven plant, including samples from 49 control workers and 91 workers who had been occupationally exposed to polyaromatic hydrocarbons (PAHs). The major urinary metabolite of PAHs, 1-hydroxypyrene (1-OHP), was measured for the exposed workers. Results from the present study showed a significant correlation between these two measurements for determination of 8-OHdG (p < 0.05, r(2) = 0.70). However, only the LC/MS/MS measurements of urinary levels of 8-OHdG showed a significant difference between the exposed and the control subjects (p < 0.05). The ELISA method failed to demonstrate this difference. Furthermore, only by using the LC/MS/MS method was a significant correlation observed between the urinary levels of 1-OHP and 8-OHdG. These findings suggest that a highly specific and sensitive analytical method such as isotope-dilution LC/MS/MS is extremely important and necessary for accurate measurement and a comprehensive study of oxidative stress in human subjects.     

Candidate reference method: Determination of valproic acid in serum by isotope-dilution mass spectrometry

Summary A method has been developed for the determination of valproic acid, without derivatization, in human serum by isotope-dilution mass spectrometry using labelled 2-propyl[3,3,3-d₃] valeric[5,5,5-d₃] acid as internal standard for accurate quantification of the concentration of valproic acid in the sample. After acidification, the analyte and internal standard are extracted withn-hexane. The amounts of valproic acid in the serum are calculated from the isotope ratio of valproic acid to labelled valproic acid, which is measured by electron impact (EI) and chemical ionization (CI) selected ion monitoring (SIM). The concentrations of valproic acid in sera measured using isotope-dilution mass spectrometry are compared with results from gas-liquid chromatography (GLC) and fluorescence polarization immunoassay (FPIA). The accuracy, precision and recovery of the GC-MS methods are discussed. The coefficient of variation determined from duplicate samples was less than 1.5%. The detection limit was 10 ng mL⁻¹ at a signal-to-noise ratio of 3:1. Part of this work was presented at the Kongre? der Deutschen Gesellschaft für Laboratoriumsmedizin, Berlin, 1994.     

Development and validation of an isotope-dilution electrospray ionization tandem mass spectrometry method with an on-line sample clean-up device for the quantitative analysis of the benzene exposure biomarker S-phenylmercapturic acid in human urine

An isotope-dilution electrospray ionization tandem mass spectrometry (ESI-MS/MS) method with an on-line sample clean-up device, for the quantitative analysis of human urine for the benzene exposure biomarker S-phenylmercapturic acid (SPMA), was developed and validated. The sample clean-up system was constructed from an autosampler, a reversed-phase C18 trap cartridge, a two-position switching valve, and controlling computer software and hardware. The sample clean-up system was interfaced via 1/20 splitting to the ESI source of a triple-quadrupole mass spectrometer using negative ion mode and multiple reaction monitoring for SPMA and the isotope-labeled internal standard. A strategy was adopted to acquire pooled blank urine matrix and quality control samples spiked with standards. Validated procedures and data on method specificity, detection limits, standard curves, precision and recovery, sample storage stability, and inter-laboratory comparison are presented. The analytical system was fully automated. No tedious manual sample clean-up procedures are required. With the selectivity and the sensitivity provided by ESI-MS/MS detection, the analytical system can be used for high-throughput and accurate determination of SPMA levels in human urine samples, as a biomarker for environmental as well as occupational benzene exposure.     

Candidate reference method: Determination of valproic acid in serum by isotope-dilution mass spectrometry

Summary A method has been developed for the determination of valproic acid, without derivatization, in human serum by isotope-dilution mass spectrometry using labelled 2-propyl[3,3,3-d₃]valeric[5,5,5-d₃] acid as internal standard for accurate quantification of the concentration of valproic acid in the sample. After acidification, the analyte and internal standard are extracted withn-hexane. The amounts of valproic acid in the serum are calculated from the isotope ratio of valproic acid to labelled valproic acid, which is measured by electron impact (EI) and chemical ionization (CI) selected ion monitoring (SIM). The concentrations of valproic acid in sera measured using isotope-dilution mass spectrometry are compared with results from gas-liquid chromatography (GLC) and fluorescence polarization immunoassay (FPIA). The accuracy, precision and recovery of the GC-MS methods are discussed. The coefficient of variation determined from duplicate samples was less than 1.5%. The detection limit was 10 ng mL⁻¹ at a signal-to-noise ratio of 3∶1. Part of this work was presented at the Kongre? der Deutschen Gesellschaft für Laboratoriumsmedizin, Berlin, 1994.     

Evaluation of supercritical fluid extraction for isotope dilution gas chromatography-mass spectrometric quantification of polychlorinated biphenyls in sediment.

Supercritical fluid extraction (SFE) has been evaluated as an extraction technique for the isotope-dilution quantification of polychlorinated biphenyls (PCBs) in a sediment sample. A high-resolution mass-spectrometric system equipped with a gas chromatograph was employed for the determination of seven target PCB congeners. The effect of the operation parameters on the SFE efficiency was investigated, in which the analytical values of five target PCB congeners significantly increased with increases in the extraction temperature and pressure, and that of 4,4'-dichlorobiphenyl further increased by applying static extraction. The following conditions were found to be optimal: extraction temperature, 140 degrees C; pressure, 30 MPa; time and mode, static for 15 min then dynamic for 30 min. Under these conditions, the addition of modifiers influenced the extraction of polar compounds, but did not affect the analytical values of the PCB congeners. The optimized method was suitable for high-throughput analysis as well as for providing accurate analytical results, which were comparable to or better than the analytical results obtained by Soxhlet extraction.     

Evaluation of a microwave-assisted extraction technique for the determination of polychlorinated biphenyls and organochlorine pesticides in sediments.

A microwave-assisted extraction (MAE) technique for the determination of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in marine sediment samples has been investigated. The analytes were extracted under different treatment conditions, such as temperature, time and extraction solvent. They were quantified by an isotope-dilution method, and the observed concentrations and recovery yields obtained under different conditions were compared. The results of a comparison between this MAE and other extraction techniques, such as pressurized fluid extraction, saponification, sonication, and Soxhlet extraction, are also given in this report. The techniques gave comparable results with the values obtained by other extraction techniques and the certified values in the samples. However, the observed concentration values of mono- and dichlorinated biphenyls varied depending on the extraction temperature.     

Rapid and sensitive on-line liquid chromatographic/tandem mass spectrometric determination of an ethylene oxide-DNA adduct, N7-(2-hydroxyethyl)guanine, in urine of nonsmokers

Ethylene oxide (EtO) is classified as a known human carcinogen. The formation of EtO-DNA adducts is considered as an important early event in the EtO carcinogenic process. An isotope-dilution on-line solid-phase extraction and liquid chromatography coupled with tandem mass spectrometry method was then developed to analyze one of the EtO-DNA adducts, N7-(2-hydroxyethyl)guanine (N7-HEG), in urine of 46 nonsmokers with excellent accuracy, sensitivity and specificity. The merits of this method include small sample volume (only 120 microL urine required), automated sample cleanup, and short total run time (12 minutes per sample). This method demonstrates its high-throughput capacity for future molecular epidemiology studies on the potential health effects resulting from the low-dose EtO exposure.     

Quantitative determination of rifampicin in aquatic products by stable isotope-dilution high liquid chromatography–tandem mass spectrometry

Rifampicin is a semi-synthetic broad-spectrum antibiotic obtained from rifamycin B. It is one of the most effective first-line antituberculosis drugs and is widely used in clinical practice. In the present study, we describe a rapid and sensitive method for the determination of rifampin in aquatic products by stable isotope-dilution high liquid chromatography–tandem mass spectrometry (HPLC–MS/MS). Samples were extracted with the acetonitrile, degreased by hexane, and then concentrated by nitrogen blowing. After separation using a C₁₈ column with a mixture of acetonitrile and water as mobile phase, it was determined by HPLC–MS/MS using the stable isotope-dilution calibration method. The performance of our method was validated. The limit of detection was 0.25 μg kg⁻¹ and the limit of quantification was 0.5 μg kg⁻¹. At the three spiked levels of 0.5, 1.0 and 5.0 μg kg⁻¹, the average recoveries of rifampicin in different aquatic products were between 75.28 and 107.6%, and the relative standard deviation ranged from 0.81 to 13.23%. This method was successfully applied for the determination of rifampin in different kinds of aquatic products and rifampicin residue was found in aquatic products obtained from markets in Beijing, China.     

Accurate Quantification of Polycyclic Aromatic Hydrocarbons in Environmental Samples Using Deuterium-labeled Compounds as Internal Standards

For the accurate quantification of polycyclic aromatic hydrocarbons (PAHs) in environmental samples by isotope-dilution mass spectrometry (IDMS) and gas chromatography-mass spectrometry (GC-MS), we used deuterium-labeled PAHs (D-PAHs) as internal standards for microg g(-1)-level certified reference materials and corresponding calibration solutions. Although pressurized liquid extraction (PLE) causes significant biases in the analytical results for ng g(-1)-level samples (2.4 - 15%), biases in the analytical results by PLE (190 degrees C, 20 MPa, 2 cycles) were small (<2.3%) and negligible for microg g(-1)-level samples when expanded uncertainty (coverage factor k = 2) was considered.     

Determination of "free" glycerol in human serum reference materials by isotope-dilution gas chromatography-mass spectrometry.

Serum free glycerol analyses are an important part of the preparation and evaluation of human serum reference materials used for the quality assurance of triglyceride assays. However, enzymatic kits for free glycerol analysis obtained from different vendors have, on occasion, provided different results for a given sample. In an effort to establish the "target" glycerol content of selected reference materials, we have established a method for the analysis of serum free glycerol by using isotope-dilution gas chromatography-mass spectrometry, incorporating [1,3-13C2]glycerol as the internal standard. The use of a simplified serum extraction and clean-up procedure resulted in (uncorrected) recoveries of glycerol averaging about 90% before derivatization, and in estimated concentrations for spiked serum pools that corresponded closely to the expected values. A comparison of enzymatic and gas chromatographic-mass spectrometric results for several reference serum pools suggest that the latter method is of value in evaluating and validating routine enzymatic methods for free glycerol analysis.     

Development of an ICP-HRIDMS method for accurate determination of traces of silicon in biological and clinical samples

An inductively coupled plasma-high resolution isotope dilution mass spectrometric (ICP-HRIDMS) method in combination with a microwave-assisted decomposition technique has been developed for the determination of traces of silicon in biological and clinical samples. A 30Si-enriched spike solution was used for the isotope dilution step. Decomposition of the samples was achieved by use either of HNO3 or a mixture of HNO3 and HF. By application of both methods of digestion to the same sample it was possible to differentiate between a poorly soluble silicate fraction and an HNO3-soluble silicon species. Traces of silicon were determined in different reference materials, which are not certified for this element, and in other biological and clinical samples. A concentration range of 1-600 microgram g(-1) was covered by the different samples. For homogeneous samples relative standard deviations of 2-4% were obtained. The detection limit was strongly affected by the blank. In this connection purification of water, used in the analytical procedure, was especially critical. The blank contribution of the ICP-MS instrument could be minimized by applying a nebulizer and a spray chamber made of PFA, a sapphire injection tube, and a silicon nitride torch. Under these conditions detection limits of 0.15 microgram g(-1) and 0.2 microgram g(-1) were obtained for the HNO3 and HNO3-HF digestion methods, respectively, when a sample weight of 0.5 g was used. With regard to expected silicon content this enables determination in almost all biological and clinical samples. The ICP-HRIDMS results were compared with those recently obtained in an interlaboratory study. This isotope-dilution method is an potential option for certification of silicon in reference materials, a method for which is still required.     

Importance of enhanced mass resolution in removing interferences when measuring volatile organic compounds in human blood by using purge-and-trap gas chromatography/mass spectrometry

The number of volatile organic compounds (VOCs) that can be purged from human blood is so great that they cannot be separated completely by capillary gas chromatography. As a result, the single-mass chromatograms used for quantitating the target compounds by mass spectrometry have many interferences at nominal (integer) mass resolution of a quadrupole mass spectrometer. The results of these interferences range from small errors in quantitation to completely erroneous results for the target VOCs. By using a magnetic sector mass spectrometer, these interferences at nominal mass can be removed at higher resolution by lowering the ion chromatogram windows around the masses of interest. At 3000 resolution (10% valley definition), unique single-ion chromatograms can be made for the quantitation ions of the target VOCs. Full-scan mass data are required to allow the identification of unknown compounds purged from the blood. By using isotope-dilution mass spectrometry, most target VOCs can be detected in the low parts per trillion range for a 10-mL quantity of blood from which the VOCs have been removed by a purge-and-trap method.     

Determination of serum cortisol using isotope dilution–liquid chromatography–mass spectrometry as a candidate reference method

We propose isotope-dilution mass spectrometry as a candidate reference method for determination of serum cortisol. The method uses liquid chromatography–mass spectrometry (LC–MS), interfaced with electrospray ionization, and selective monitoring of the [M+H]⁺ ions of cortisol and isotopically labeled cortisol. The isotope-dilution–liquid chromatography–mass spectrometry (ID–LC–MS) method simplifies sample-preparation, because samples are processed by simple solvent extraction without further clean-up and derivatization. We studied the time required for complete equilibration of endogenous cortisol and labeled cortisol spiked into serum and found it to be less than 1 h. The repeatability and the reproducibility of the method were evaluated and found to be 0.55% of the measurement value. CRM 192 and 193 from the Bureau Communautaire de Reference were analyzed for verification of the method. The results obtained from the ID–LC–MS method agreed with the certified values. The relative uncertainty of measurement results for samples in the range of a few tens of micrograms per kilogram to several hundred micrograms per kilogram was evaluated and found to be 0.56%. Immunoassay carried out by three independent clinical laboratories produced results more than 15% higher than this ID–LC–MS method, suggesting the presence of bias in the immunoassay methods.     

Determination of nerve agent metabolites in human urine by isotope-dilution gas chromatography-tandem mass spectrometry after solid phase supported derivatization

A simple and sensitive method has been developed and validated for determining ethyl methylphosphonic acid (EMPA), isopropyl methylphosphonic acid (IMPA), isobutyl methylphosphonic acid (iBuMPA), and pinacolyl methylphosphonic acid (PMPA) in human urine using gas chromatography-tandem mass spectrometry (GC-MS/MS) coupled with solid phase derivatization (SPD). These four alkyl methylphosphonic acids (AMPAs) are specific hydrolysis products and biomarkers of exposure to classic organophosphorus (OP) nerve agents VX, sarin, RVX, and soman. The AMPAs in urine samples were directly derivatized with pentafluorobenzyl bromide on a solid support and then extracted by liquid–liquid extraction. The analytes were quantified with isotope-dilution by negative chemical ionization (NCI) GC-MS/MS in a selected reaction monitoring (SRM) mode. This method is highly sensitive, with the limits of detection of 0.02 ng/mL for each compound in a 0.2 mL sample of human urine, and an excellent linearity from 0.1 to 50 ng/mL. It is proven to be very suitable for the qualitative and quantitative analyses of degradation markers of OP nerve agents in biomedical samples.     

Determination of butyltin compounds in environmental samples by isotope-dilution GC–ICP–MS

Isotope-dilution analysis in combination with GC-ICP-MS detection has been applied to the determination of butyltin species in environmental samples. Different spikes containing the isotopically labeled butyltin species have been synthesized in the laboratory after optimization of the reaction conditions. The isotopic compositions of the tin species in the different spike solutions were determined by GC-ICP-MS after derivatization by aqueous ethylation with sodium tetraethylborate. Reverse isotope-dilution analysis was used for quantitation of the spike solutions by means of natural MBT, DBT, and TBT standards. The mixed spikes were used for simultaneous analysis of MBT, DBT and TBT in the certified reference materials, PACS-2, CRM 462, and CRM 646, with satisfactory results. The excellent agreement of the different speciation results obtained by use of the different spikes is a good indicator of the precision, accuracy, and reliability which can be achieved by using isotope-dilution analysis for trace metal speciation.Application of a double spike containing (119)Sn-enriched MBT (79.7 At%), (118)Sn-enriched DBT (86.7 At%), and (119)Sn-enriched TBT (83.1 At%) also enabled evaluation of the conditions resulting in quantitative extraction of the species from the solid matrix, in combination with possible alterations depending on the different extraction procedures used (mechanical shaking, ultrasounds, and microwaves). Mathematical equations used for this purpose computed the correct species concentrations directly and, additionally, the decomposition factors (from TBT to DBT and from DBT to MBT) after precise measurement of the (119)Sn/(120)Sn and (118)Sn/(120)Sn ratios for all butyltin species by GC-ICP-MS.     

Characterization and quantification of metallothionein isoforms by capillary electrophoresis–inductively coupled plasma–isotope-dilution mass spectrometry

In a new approach to the characterization and quantification of metallothionein isoforms an on-line isotope-dilution method in combination with the coupling of capillary electrophoresis (CE) to an inductively coupled plasma-sector field mass spectrometer (ICP-SFMS) is reported. Metallothionein (MT) isoforms are separated by CE and the elements Cu, Zn, Cd, and S are detected simultaneously by use of ICP-SFMS in the medium resolution mode. On-line isotope dilution is performed by continuous introduction of an isotopically enriched, species-unspecific spike solution after the separation step. MT from rabbit liver and a further purified MT-1 isoform were quantified by determination of sulfur, and the stoichiometric compositions of the metalloprotein complexes are characterized by determination of their sulfur-to-metal ratios.     

Measurement of PCDDs, PCDFs, and non-ortho-PCBs by comprehensive two-dimensional gas chromatography-isotope dilution time-of-flight mass spectrometry (GC x GC-IDTOFMS)

Comprehensive two-dimensional gas chromatography with isotope-dilution time-of-flight mass spectrometry (GC × GC-IDTOFMS) was used to measure polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), and coplanar polychlorinated biphenyl (cPCB) concentrations in ash, sediment, vegetation, and fish samples. The GC × GC capability was achieved by using a quad jet, dual stage, thermal modulator. Zone compression of the GC peaks from modulation resulted in a significant increase of the signal intensity over classical GC-IDTOFMS. The GC × GC column set used an Rtx-Dioxin 2 phase as the first dimension (¹D) and an Rtx-500 as the second dimension (²D). The chromatographic separation of the 17 PCDD/Fs and the 4 cPCBs was attained in ¹D except for 2,3,7,8-TCDD and CB126 for which deconvoluted ion currents (DIC) were required to be reported separately. The Rtx-500 phase separated the bulk matrix interfering compounds from the target analytes in ²D. The instrumental limit of detection (iLODs) was 0.5 pg for 2,3,7,8-TCDD. The calibration curves showed good correlation coefficients for all the compounds investigated in the concentration range of 0.5–200 pg. GC × GC-IDTOFMS results compared favorably to those from conventional isotope-dilution one-dimensional gas chromatography-high resolution mass spectrometry (GC-IDHRMS). The comprehensive mass analysis of the TOFMS further permitted the identification of other contaminants of concern in the samples.     

Analysis of N7-(benzo[a]pyrene-6-yl)guanine in urine using two-step solid-phase extraction and isotope dilution with liquid chromatography/tandem mass spectrometry

Analysis of urinary N7-(benzo[a]pyren-6-yl)guanine (BP-6-N7Gua), a DNA adduct induced by benzo[a]pyrene, may serve as a risk-associated biomarker for exposure to polyaromatic hydrocarbons (PAHs). In this study a highly sensitive and specific analytical method, incorporating on-line sample preparation coupled with isotope-dilution liquid chromatography and tandem mass spectrometry (LC/MS/MS), was developed to quantitate this adduct in human urine. In order to achieve accurate quantitation, 15N5-labeled BP-6-N7Gua was synthesized to serve as the internal standard, and a two-step solid-phase extraction (SPE) procedure using C8 and SCX cartridges was used for sample cleanup. BP-6-7-N7Gua was analyzed using positive ion LC/MS/MS operated in multiple reaction monitoring (MRM) mode. The [M+H]+ ions at m/z 402 and 407 and the common fragment ion of [M+H]+ at m/z 252 were monitored for quantification. The recovery of this analyte after two-step SPE was 90%, and the limit of detection was 2.5 fmol/mL in 10 mL of urine. This highly specific and sensitive method for BP-6-N7Gua in urine may be applied to assess exposure to PAHs in coke-oven workers for future molecular epidemiology studies on health effects of PAHs.     

Revisiting type-A uncertainties relating to the measurement of mass fraction of lead using isotope-dilution inductively coupled plasma mass spectrometry: a way of improving measurement precision and expanded uncertainty

A quadrupole inductively coupled plasma mass spectrometer (Q-ICP-MS) has been used for determination of lead in plant materials using isotope-dilution inductively coupled plasma mass spectrometry. The accuracy of the method was demonstrated by analysis of a matrix certified reference material, NIST SRM 1547 Peach Leaves. Specific instrumental parameters of Q-ICP-MS, including isotope analysis mode, integration time per point, number of points per mass, and number of measurements, were optimized to obtain the best measurement precision. The precision (expressed as relative standard deviation) associated with replicate measurement of the ²⁰⁸Pb/²⁰⁶Pb isotope ratio and its mass-bias correction factor was <0.2%. Following “Example A7” of the Eurachem/CITAC Guide, the relative expanded uncertainty, U _rel, (coverage factor k = 2) was found to be ±1.1%, which fulfilled the target value of ±2% maximum and was lower than the uncertainty of ±3.4% reported by NIST based on isotope-dilution thermal ionization mass spectrometry. Sample recovery of 99% was obtained.