Structural control of peptide-coated gold nanoparticle assemblies by the conformational transition of surface peptides

Gold nanoparticles having peptide chains on the surfaces have been prepared yb ring-opening polymerization of gamma-methyl L-glutamate N-carboxyanhydride with fixed amino groups on the nanoparticle surface as an initiator. The number of peptide chains on the surface was adjusted to ca. 2 molecules per gold nanoparticle by controlling the number of fixed amino groups on the surface. The peptide chains on the surface were partially saponified to obtain poly(gamma-methyl L-glutamate-co-L-glutamic acid) with 28 mol% of glutamic acid residues. The number-average molecular weight of the peptide was 73,000. We described structural control of the peptide-coated gold nanoparticle assembly by conformational transition of the surface peptides. In deionized water, the peptide chains on the nanoparticle took a random coil conformation, and the individual nanoparticles existed in dispersed globular species. On the other hand, the peptide chains on the nanoparticle took an alpha-helical conformation in trifluoroethanol. Under this condition, the alpha-helical peptide chains on distinct gold nanoparticles connected the nanoparticles to form a fibril assembly owing to the dipole-dipole interaction between the surface peptide chains. The morphology of the peptide-coated gold nanoparticle assembly could be controlled by the conformational transition of surface peptides, which was attended by solution composition changes.     

pH-induced reversible conformational and morphological regulation of polyleucine grafted polyallylamine assembly in solution

One of the essential parts in the molecular mechanism of biological properties is the structural changes of proteins induced by stimuli. An amphiphilic copolymer, poly(L-leucine) grafted polyallylamine as a simple model of proteins, has been prepared by NCA polymerization with free amino groups of polyallylamine as an initiator. Here, we report the pH-induced reversible conformational and morphological regulation of the amphiphilic copolymer, whose hydrophobic peptide graft chains have no pH-sensitive groups, in an aqueous solution containing 50 vol % trifluoroethanol. The conformation of the poly(L-leucine) graft chain was found to be strongly pH dependent. Under acidic conditions, where electrostatic repulsion existed between the neighboring protonated amine moieties of the polyallylamine main chain, the rapid aggregation of the poly(l-leucine) graft chains was disturbed, and the peptide graft chains formed a beta-sheet structure owing to the intramolecular hydrogen bonding among the graft chains. Under this condition, the amphiphilic polymer formed amyloid-like fibrils, and then the fibrils grew into a planer plate composed of staked beta-sheets. On the other hand, under basic conditions, the poly(L-leucine) graft chains showed conformational transitions from a beta-sheet structure to an alpha-helical conformation owing to a distortion of the regular arrangement of the peptide graft chains by the conformational change of the polyallylamine main chain, whose amino groups were deprotonated. The conformational transition resulted in a disturbance of the regular sheet assembly of the amphiphilic copolymer and induced morphological changes to the amorphous globular aggregates. The pH-induced conformational and morphological changes of the poly(L-leucine) graft polyallylamine were reversible and synchronized with the protonation of the polyallylamine main chain.     

A new peptide-based method for the design and synthesis of nanoparticle superstructures: construction of highly ordered gold nanoparticle double helices

Left-handed gold nanoparticle double helices were prepared using a new method that allows simultaneous synthesis and assembly of discrete nanoparticles. This method involves coupling the processes of peptide self-assembly of and peptide-based biomineralization of nanoparticles. In this study, AYSSGAPPMPPF (PEPAu), an oligopeptide with an affinity for gold surfaces, was modified with an aliphatic tail to generate C12-PEPAu. In the presence of buffers and gold salts, amphiphilic C12-PEPAu was used to both control the formation of monodisperse gold nanoparticles and simultaneously direct their assembly into left-handed gold nanoparticle double helices. The gold nanoparticle double helices are highly regular, spatially complex, and they exemplify the utility of this methodology for rationally controlling the topology of nanoparticle superstructures and the stereochemical organization of discrete nanoparticles within these structures.     

Gold nanoparticles as a colorimetric sensor for protein conformational changes

Spherical gold nanoparticles and flat gold films are prepared in which yeast iso-1-cytochrome c (Cyt c) is covalently bound to the gold surface by a thiol group in the cystein 102 residue. Upon exposure to solutions of different pH, bound Cyt c unfolds at low pH and refolds at high pH. This conformational change causes measurable shifts in the color of the coated nanoparticle solutions detected by UV-VIS absorption spectroscopy and in the refractive index (RI) of the flat gold films detected by surface plasmon resonance (SPR) spectroscopy. Both experiments demonstrate the same trend with pH, suggesting the use of protein-covered gold nanoparticles as a simple colorimetric sensor for conformational change.     

Block Copolymer Supported Gold Nanoparticles Assemblies with Exposed Gold Surface

Polymer-involved nanoparticles or nanoparticle assemblies are now facing a crossroad, where the exposure of nanoparticle and multiple nanoparticles cannot be obtained at the same time. Therefore, a new series of nanoparticle clusters is synthesized, where multiple gold nanoparticles assemble with amphiphilic block copolymers supporting inside. The exposure of gold nanoparticles of the structure is confirmed and increases the reduction rate of 4-nitrophenol by 60%. The assemblies can also be used as surface enhanced Raman scattering(SERS) probes with an enhancement factor(EF) as high as 3×10³.     

金纳米粒子与聚吡咯纳米管的复合及其SERS效应研究

通过柠檬酸盐与HAuCl4水溶液在微沸状态下反应制备的金纳米粒子因其特殊的表面与界面效应在光学、生物学和催化化学领域得到了广泛应用,而聚吡咯(PPy)具有环境稳定性好、电导率高且变化范围大、容易合成等优点,聚吡咯纳米管可用作导电材料、酶封装材料、抗静电材料,也可用于制备传感器、传动器、固体电解质电容器等。     

Catalytically Active Peptide–Gold Nanoparticle Conjugates: Prospecting for Artificial Enzymes

The self‐assembly of peptides onto the surface of gold nanoparticles has emerged as a promising strategy towards the creation of artificial enzymes. The resulting high local peptide density surrounding the nanoparticle leads to cooperative and synergistic effects, which result in rate accelerations and distinct catalytic properties compared to the unconjugated peptide. This Minireview summarizes contributions to and progress made in the field of catalytically active peptide–gold nanoparticle conjugates. The origin of distinct properties, as well as potential applications, are also discussed.     

Folding induced assembly of polypeptide decorated gold nanoparticles

Reversible assembly of gold nanoparticles controlled by the homodimerization and folding of an immobilized de novo designed synthetic polypeptide is described. In solution at neutral pH, the polypeptide folds into a helix-loop-helix four-helix bundle in the presence of zinc ions. When immobilized on gold nanoparticles, the addition of zinc ions induces dimerization and folding between peptide monomers located on separate particles, resulting in rapid particle aggregation. The particles can be completely redispersed by removal of the zinc ions from the peptide upon addition of EDTA. Calcium ions, which do not induce folding in solution, have no effect on the stability of the peptide decorated particles. The contribution from folding on particle assembly was further determined utilizing a reference peptide with the same primary sequence but containing both D and L amino acids. Particles functionalized with the reference peptide do not aggregate, as the peptides are unable to fold. The two peptides, linked to the nanoparticle surface via a cysteine residue located in the loop region, form submonolayers on planar gold with comparable properties regarding surface density, orientation, and ability to interact with zinc ions. These results demonstrate that nanoparticle assembly can be induced, controlled, and to some extent tuned, by exploiting specific molecular interactions involved in polypeptide folding.     

Transmetalation reaction between hydrophobic silver nanoparticles and aqueous chloroaurate ions at the air-water interface

The transmetalation reaction between a sacrificial nanoparticle and more noble metal ions in solution has emerged as a novel method for creating unique hollow and bimetallic nanostructures. In this report, we investigate the possibility of carrying out the transmetalation reaction between hydrophobic silver nanoparticles assembled and constrained at the air-water interface and subphase gold ions. We observe that facile reduction of the subphase gold ions by the sacrificial silver nanoparticles occurs resulting in the formation of elongated gold nanostructures that appear to cross-link the sacrificial silver particles. This transmetalation reaction may be modulated by the insertion of an electrostatic barrier in the form of an ionizable lipid monolayer between the silver nanoparticles and the aqueous gold ions that impacts the gold nanoparticle assembly. Transmetalation reactions between nanoparticles constrained into a close-packed structure and appropriate metal ions could lead to a new strategy for metallic cross-linking of nanoparticles and generation of coatings with promising optoelectonic behavior.     

Enhanced stability of Janus nanoparticles by covalent cross-linking of surface ligands

A mercapto derivative of diacetylene was used as the hydrophilic ligand to prepare Janus nanoparticles by using hydrophobic hexanethiolate-protected gold (AuC6, diameter 5 nm) nanoparticles as the starting materials. The amphiphilic surface characters of the Janus nanoparticles were verified by contact angle measurements, as compared to those of the bulk-exchange counterparts where the two types of ligands were distributed rather homogeneously on the nanoparticle surface. Dynamic light scattering studies showed that the Janus nanoparticles formed stable superstructures in various solvent media that were significantly larger than those by the bulk-exchange counterparts. This was ascribed to the amphiphilic characters of the Janus nanoparticles that rendered the particles to behave analogously to conventional surfactant molecules. Notably, because of the close proximity of the diacetylene moieties on the Janus nanoparticle surface, exposure to UV irradiation led to effective covalent cross-linking between the diacetylene moieties of neighboring ligands, as manifested in UV-vis and fluorescence measurements where the emission characteristics of dimers and trimers of diacetylene were rather well-defined, in addition to the monomeric emission. In contrast, for bulk-exchange nanoparticles, no trimer emission could be identified, and the intensity of dimer emission was markedly lower (though the intensity increased with increasing diacetylene coverage on the particle surface) under the otherwise identical experimental conditions. This is largely because the diacetylene ligands were distributed on the entire particle surface, and it was difficult to find a large number of ligands situated closely so that the stringent topochemical principles for the polymerization of diacetylene derivatives could be met. Importantly, the cross-linked Janus nanoparticles were found to exhibit marked enhancement of the structural integrity, which was attributable to the impeded surface diffusion of the thiol ligands on the nanoparticle surface, as manifested in fluorescence measurements of aged nanoparticles.     

Silica nanoparticles at interfaces modulated by amphiphilic polymer and surfactant

The interfacial behavior of silica nanoparticles in the presence of an amphiphilic polymer poly( N-isopropylacrylamide) (PNIPAM) and an anionic surfactant sodium dodecyl sulfate (SDS) is studied using neutron reflectivity. While the nanoparticles do not show any attraction to hydrophilic and hydrophobic surfaces in pure water, presence of the amphiphilic polymer induces significant adsorption of the nanoparticles at the hydrophobic surface. This interfacial behavior is activated due to interaction of the nanoparticles with PNIPAM, the amphiphilic nature of which leads to strong adsorption at a hydrophobic surface but only weak interaction with a hydrophilic surface. The presence of SDS competes with nanoparticle-PNIPAM interaction and in turn modulates the interfacial properties of the nanoparticles. These adsorption results are discussed in relation to nanoparticle organization templated by dewetting of charged polymer solutions on a solid substrate. Our previous studies showed that nanoparticle assembly can be induced to form complex morphologies produced by dewetting of the polymer solutions, such as a polygonal network and long-chain structures. This approach, however, works on a hydrophilic substrate but not on a hydrophobic substrate. These observations can be explained in part by particle-substrate interactions revealed in the present study.     

The interaction of peptides and proteins with nanostructures surfaces: a challenge for nanoscience

The impact of nanotechnologies in biomedicine and biotechnology is becoming more and more evident. It imposes practical challenges, for instance, raising specific issues on the biocompatibility of nanostructures. Nanoparticles are characterized by a high surface-to-volume ratio, which makes them reactive to foreign species. Thus, when proteins or peptides approach an inorganic nanoparticle, as well as a flat surface, they are likely to interact with the substrate to some extent. This interaction is crucial for applications in drug delivery, imaging, diagnostics, implants, and other medical devices. Specifically, gold nanoparticles are highly versatile and particularly appealing. It is widely accepted that the surfaces of nanoparticles adsorb proteins either transiently in the soft corona layer or permanently in the hard corona layer. As a consequence, the protein structure and/or function may undergo profound adjustments or remain conserved. Detailing the interaction of different inorganic substrates with proteins and peptides at the atomic level, and designing ways to control the interaction, is the key for biomedical applications of nanoparticles, both from a fundamental viewpoint and for practical implementations. In the last decade, we have addressed protein–nanoparticle interactions, focusing on interfaces of gold surfaces and nanoparticles with amyloidogenic peptides and protein models. We have developed classical force fields, performed advanced molecular dynamics simulations, and compared computational outcomes with data from nuclear magnetic resonance experiments. Protein–gold complexes with differently coated gold nanoparticles have been modeled to explore the effects of charge and size on the protein structure. Our work unravels that a complex interplay between surface properties and characteristics of the biological adsorbate determines whether peptide conformation is influenced and whether protein aggregation is accelerated or inhibited by the presence of the substrate. General guidelines to cope with amyloidogenic proteins could be inferred: these can be essentially summarized with the necessity of balancing the hydrophobic and electrostatic interactions that the amyloidogenic proteins establish with the coating moieties.     

Cross-linked polynorbornene-coated gold nanoparticles: dependence of particle stability on cross-linking position and cross-linker structure

This paper describes the preparation of cross-linked polynorbornene coated gold nanoparticles. The polymer was grown radially from the particle surface using a ring opening metathesis polymerization of norbornene and an electrophilic norbornene ester, which was cross-linked using a variety of diamines. The stability of the cross-linked nanoparticles toward oxidative etching by cyanide was evaluated. The rate of etching decreases as diamines with fewer degrees of conformational freedom are used as cross-linkers. The distance of the cross-linking block from the nanoparticle surface was systematically varied. Nanoparticles with the cross-linked block furthest from the surface were etched most slowly. This is suggested to arise as a result of the polymers adopting a mushroom conformation when the cross-linking block is close to the particle surface, while more distal cross-linking results in more rigid polymer chains that are less permeable to the cyanide etchant. These results provide new insight into how fine-tuning the polymer cross-linking architecture can modulate nanoparticle stability.     

Gold nanoparticle patterning of silicon wafers using chemical e-beam lithography

This paper demonstrates a novel facile method for fabrication of patterned arrays of gold nanoparticles on Si/SiO2 by combining electron beam lithography and self-assembly techniques. Our strategy is to use direct-write electron beam patterning to convert nitro functionality in self-assembled monolayers of 3-(4-nitrophenoxy)-propyltrimethoxysilane to amino functionality, forming chemically well-defined surface architectures on the 100 nm scale. These nanopatterns are employed to guide the assembly of citrate-passivated gold nanoparticles according to their different affinities for amino and nitro groups. This kind of nanoparticle assembly offers an attractive new option for nanoparticle patterning a silicon surface, as relevant, for example, to biosensors, electronics, and optical devices.     

基于AFM纳米氧化技术的金纳米粒子定点组装

二维纳米粒子矩阵列在纳米电子器件^[1,2]、表面增强喇曼活性基底^[3,4]、刻蚀掩模^[5]等领域具有广泛的应用前景。在这些纳米粒子阵列为内部,纳米粒子的排布是随机、无序的。这一缺点已经妨碍了纳米粒子阵列在上述领域中的进一步应用。基于此,人们开始关注纳米粒子的可控组装。传统的光刻技术^[6]、微接触印刷技术^[7]以及生物分子模板技术^[8]都被用来实现纳米粒子在固体表面上的可控组装,本实验室在纳米粒子的合成及可控组装方面也进行了研究^[7,9,11]。本文力图精确控制单个纳米粒子在基底表面上的组装位置。利用AFM纳米氧化技术。在硅表面构建了纳米级的化学图形化表面,通过不同的化学官能团,如甲基、氨基对金纳米粒子亲和性质的差异,实现了纳米粒子在固体表面的定点组装。     

Structure of peptides on metal oxide surfaces probed by NMR

Peptides that bind inorganic surfaces and template the formation of nanometer-sized inorganic particles are of great interest for the self- or directed assembly of nanomaterials for sensors and diagnostic applications. These surface-recognizing peptides can be identified from combinatorial phage-display peptide libraries, but little experimental information is available for understanding the relationship between the peptide sequence, structure at the nanoparticle surface, and function. We have developed NMR methods to determine the structures of peptides bound to inorganic nanoparticles and report on the structure of three peptides bound to silica and titania surfaces. Samples were prepared under conditions leading to rapid peptide exchange at the surface such that solution-based nuclear Overhauser experiments can be used to determine the three-dimensional structure of the bound peptide. The binding motif is defined by a compact "C"-shaped structure for the first six amino acids in the 12-mer. The orientation of the peptide on the nanoparticle surface was determined by magnetization transfer from the nanoparticle surface to the nearby peptide protons. These methods can be applied to a wide variety of abiotic interfaces to provide an insight into the relationship between the primary sequence of peptides and their functionality at the interface.     

Formation of gold nanoparticles in microreactor composed of helical peptide assembly in water

A novel microreactor was prepared by self-assembly of an amphiphilic block copolymer composed of a hydrophobic helical peptide unit with a naphthyl group at the C terminal and a hydrophilic poly(ethylene glycol) unit. The copolymer formed a self-assembly in water, taking a vesicular structure. Noticeably, when the copolymer was dispersed in an Au(3+) aqueous solution, gold nanoparticles were formed without addition of any reducing reagent. The naphthyl groups, which are located at the inner surface of the vesicular assembly, promoted the reduction of Au(3+) ions with accompanying pH decrease.     

Synthesis and capping of water-dispersed gold nanoparticles by an amino acid: bioconjugation and binding studies

We report a novel strategy for the synthesis of aqueous stable, carboxylated gold nanoparticles (GNPs) by using glutamic acid as the reducing agent. The ratio of chloroaurate ions, AuCl(-)(4) to glutamic acid was optimized in the reaction medium to obtain monodispersed GNPs. Glutamic acid reduced gold nanoparticles were characterized by UV-visible, FTIR, dynamic light scattering and transmission electron microscopy, which demonstrated high stability in aqueous solution over a period of time indicating stabilization via surface-bound amino acid. Functionalized nanoparticles were conjugated with protein molecules through electrostatic attraction between the surface-terminated negatively charged carboxylate groups (COO(-)) of glutamic acid and the positively charged amino groups (NH(+)(3)) of the protein. The conjugation efficiency of the GNP:protein conjugates was confirmed qualitatively and quantitatively through gel electrophoresis and critical flocculation concentration analysis. The interaction between functionalized GNPs with protein molecules was investigated using fluorescence spectroscopy showing the fluorescence quenching of the tryptophan residues of protein molecules after conjugation. Circular dichroism (CD) studies of the conjugates confirmed that the protein undergoes a more flexible conformational state on the boundary surface of GNPs after conjugation. There was substantial conformational transition from alpha-helix to beta-sheet structure after conjugation of protein to GNPs.     

Construction of simple gold nanoparticle aggregates with controlled plasmon–plasmon interactions

We have developed a colloidal assembly for the study of plasmon–plasmon interactions between gold nanoparticles. Colloidal aggregates of controlled size and interparticle spacing were synthesized on silica nanoparticle substrates. Following the immobilization of isolated gold nanoparticles onto silica nanoparticles, the surfaces of the adsorbed gold nanoparticles were functionalized with 4-aminobenzenethiol. This molecular linker attached additional gold nanoparticles to the ‘parent' gold nanoparticle, forming small nanoparticle aggregates. The optical absorption spectrum of these clusters differed from that of gold colloid in a manner consistent with plasmon–plasmon interactions between the gold nanoparticles.     

A facile one-pot method to fabricate gold nanoparticle chains with dextran

A biocompatible water-soluble dextran has been used for controllable one-dimensional assembly of gold nanoparticles via a one-pot method.Long gold nanoparticle chains with good dispersion in water could be easily obtained after adding dextran into the mixture of HAuCl 4 and sodium citrate.The measurements of scanning electron microscopy(SEM) and dynamic light scattering(DLS) confirmed the formation of gold nanoparticle chains.The morphology and dispersion properties of gold nanoparticle chains could be tuned by adjustment of the reagent ratio,stirring speed,and reaction time.