无孔单分散亲水性中强阳离子交换树脂的制备及其在蛋白质快速分离中的应用研究

以3.0μm无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂为基质,将其表面经新的化学方法改性后制备了一种新型的无孔中强阳离子交换色谱填料。详细考察了该无孔填料对标准蛋白分离性能,有机溶剂、pH、流动相盐种类和流速等对蛋白质保留的影响。实验结果表明,在流速为4 mL/min时,线性梯度时间在2.0 min内可快速分离4种标准蛋白,蛋白质的保留符合阳离子交换色谱规律。将其应用于快速纯化鸡蛋清中的溶菌酶,取得较好效果。     

快速弱阴离子交换无孔聚合物固定相的制备及用于蛋白质的高效液相色谱分离

将粒径为3.0μm无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂(PGMA/EDMA)的表面经不同的化学方法改性,制备了两种不同配基的弱阴离子交换(WAX-Ⅰ和WAX-Ⅱ)色谱填料。在同等色谱条件下,比较了两种填料对蛋白质的分离性能,发现WAX-Ⅰ型填料分离性能优于WAX-Ⅱ。详细考察了WAX-Ⅰ型弱阴离子交换色谱填料流动相pH值、流速及有机溶剂等对蛋白质保留的影响。实验结果表明,当流动相流速为3mL/min时,4种标准蛋白可在2min内基线快速分离,蛋白质的保留符合阴离子交换色谱规律。该填料可以用于生物工程产品的快速分离和纯化。     

快速弱阴离子交换无孔聚合物固定相的制及用于蛋白质的高效液相色谱分离

将粒径为3.0 μm无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂(PGMA/EDMA)的表面经不同的化学方法改性,制备了两种不同配基的弱阴离子交换(WAX-Ⅰ和WAX-Ⅱ)色谱填料.在同等色谱条件下,比较了两种填料对蛋白质的分离性能,发现WAX-Ⅰ型填料分离性能优于WAX-Ⅱ.详细考察了WAX-Ⅰ型弱阴离子交换色谱填料流动相pH值、流速及有机溶剂等对蛋白质保留的影响.实验结果表明,当流动相流速为3mL/min时,4种标准蛋白可在2 min内基线快速分离,蛋白质的保留符合阴离子交换色谱规律.该填料可以用于生物工程产品的快速分离和纯化.     

无孔单分散亲水性强阳离子交换固定相的制备及其在蛋白质快速分离中的应用研究

采用分散聚合法制备小颗粒种子及“一步种子溶胀聚合”法成功地制备了粒径为3.0 μm的无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂,其表面经水解、环氧化、再水解后与氯磺酸反应,制备了一种新型的强阳离子交换色谱填料（SCX）。详细考察了该填料对标准蛋白质的分离性能及流动相中盐的种类、有机溶剂、流速等对蛋白质保留的影响。实验结果表明,在流速为4 mL/min时,采用线性梯度洗脱,1.0 min内可快速分离4种标准蛋白质,蛋白质的保留符合阳离子交换色谱规律。将SCX应用于快速纯化鸡蛋清中的溶菌酶和猪心中的细胞色素-C,取得了较好的效果。     

单分散大孔亲水弱阳离子交换填料的制备及其对鱼精蛋白的分离纯化

以自制的5.0 μm单分散大孔亲水交联聚甲基丙烯酸环氧丙酯(PGMA/EDMA)微球为基质,对其表面进行化学改性,合成弱阳离子交换色谱填料(WCX)。详细考察了该填料对标准蛋白质的分离性能、表面亲水性能、稳定性和重现性以及流速对蛋白保留的影响。实验结果表明,该色谱填料对蛋白的分离性能、重现性及稳定性良好;在流速为3 mL/min时,采用线性梯度洗脱,6 min内可分离4种标准碱性蛋白质,以溶菌酶测定的该填料的动力学吸附容量为29.86 mg/g。将其用于鱼精蛋白的分离纯化,经反相高效液相色谱测定纯化后鱼精蛋白的纯度为99.2%;与商品Shodex IEC SP-825强阳离子交换色谱柱比较,纯化结果几乎一样。     

单分散树脂基质的弱阳离子交换色谱固定相的制备及其在生物大分子分离中的应用研究

采用分散聚合法制备种子和“一步种子溶胀聚合法”制备了粒径为6~15 μm的单分散多孔氯甲基苯乙烯-二乙烯苯微球。该微球经化学改性后得到一种亲水性良好的新型高效弱阳离子交换色谱固定相。详细考察了该固定相的表面亲水性、对标准蛋白的分离性能和盐的种类对蛋白质保留行为的影响。考察结果表明该固定相是一种性能优异的弱阳离子交换色谱固定相。将其应用于鸡蛋清中溶菌酶的快速分离纯化,纯化后的溶菌酶纯度高于96%,比活高达71184 U/mg。     

单分散亲水两性离子交换树脂的制备及其在生物大分子分离中的应用

采用分散聚合与溶胀聚合相结合的方法及高分子溶液致孔技术, 成功地制备了粒径为5.0 μm大孔和超大孔结构的单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂, 并进行了结构表征. 将该树脂经胺化后再与1,3-丙磺酸内酯反应, 得到一种新型的两性离子交换(强阳-强阴型)高效液相色谱填料. 研究了该填料对标准蛋白分离性能及流动相中有机溶剂、 流速和pH值对蛋白保留的影响. 实验结果表明, 在流速为3 mL/min时, 采用线性梯度洗脱, 在4.0 min内可同时快速基线分离3种酸性和2种碱性蛋白.     

原子转移自由基聚合法制备强阴离子交换色谱填料及其在蛋白质分离中的应用

在大孔硅胶表面引入原子转移自由基聚合的引发基团,通过该技术将甲基丙烯酰氧乙基三甲基氯化铵聚合于硅胶表面,制得了强阴离子交换色谱填料.详细考察了该填料对标准蛋白质的分离性能及流动相pH、流速、有机溶剂对蛋白质保留的影响.实验结果表明,在流速为0.75 mL/min时,采用线性梯度洗脱,20 min内可快速分离不同体系的三种标准蛋白;并将该填料用于鸡蛋中卵清蛋白的快速分离纯化,取得了很好的效果.     

高亲水性强阳离子交换色谱填料的制备及其在蛋白质分析中的应用

以具有双孔结构的聚甲基丙烯酸环氧丙酯(PGMA)微球为基质,以葡萄糖进行表面亲水改性,制备了强阳离子交换色谱填料,并将其用于复杂生命体系中生物大分子的快速而高效的分离、分析与纯化。葡萄糖亲水改性增进了填料的生物相容性,提高了蛋白质样品的回收率;双孔结构及较高的比表面积赋予填料良好的柱渗透性和样品负载量。以标准蛋白质为样品,考察了该填料对生物样品的分离性能。以100 mm×4.6 mm的色谱柱分离4种蛋白质,在6 min内实现了基线分离;以溶菌酶为样品,填料的吸附容量为39.5 g/L,在蛋白质快速分离纯化分析中显示了良好的应用前景。     

新型单分散聚合物基质高效疏水作用色谱填料的合成及性能研究

以自行合成的8.0μm大孔单分散亲水性交联聚甲基丙烯酸环氧丙酯微球为基质,采用化学改性方法合成了邻二醇配基新型高效疏水作用色谱填料。详细评价了该填料对蛋白质的分离性能、动力学吸附容量、质量回收率、硫酸铵起始浓度和流动相pH值对蛋白保留的影响。结果表明,这种高效疏水作用色谱填料的分离性能优良,分离了5种标准蛋白,对溶菌酶的活性回收率为96%±5%,吸附容量高达36.5 g/L。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.