溶剂热合成Cu2O微球及其对高氯酸铵热分解的催化作用

以聚乙烯吡咯烷酮(PVP)为添加剂,利用溶剂热法合成了Cu2O微球.考察了PVP用量以及反应温度对产物形貌的影响,并在反应时间为2.5与4.5h时分别合成了直径为100-200nm和1μm的Cu2O微球.同时,利用差热分析(DTA)技术考察了不同直径的Cu2O微球对高氯酸铵(AP)热分解的催化效果,结果表明:添加2%(w)的直径为100-200nm和1μm的Cu2O微球使得AP的高温分解温度分别降低了116和118°C,AP在低温阶段的分解量也明显提高.     

α-MnO_2纳米管自组装微球的可控制备及电化学性能

以KMnO_4、HCl为反应物,H_2SO_4、NH_4Cl为助剂,利用水热法成功合成了α-MnO_2纳米管自组装微球。并采用X射线晶体衍射(XRD)、场发射扫描电子显微镜(SEM)、透射电子显微镜(TEM)以及X射线光电子能谱(XPS)表征手段对产物进行了形貌和结构表征,发现H~+与Cl-离子浓度对产物的晶型有很大影响:单一增加H+或Cl-离子浓度可以使纳米管管径减小、长度增加;同时增加两种离子浓度则产物从α相转化为β相;NH4+可以起到维持产物晶型(α相)以及管状形貌的作用。电化学性能测试表明,具有独特形态的α-MnO_2纳米管微球作为锂电负极具有高容量(20 m A·g-1电流密度下首周放电比容量达1783.5 m Ah·g-1)与良好的倍率性能,是具有广阔应用前景的锂离子电池材料。     

微含水量电解液中高管径比TiO_2纳米管阵列的制备

通过阳极氧化法在微含水量为0.5wt%的NH4F/乙二醇/H2O酸性电解质体系中制备了管径大、高管径比的二氧化钛(TiO2)纳米管阵列。采用SEM、XRD等测试手段对TiO2纳米管阵列形貌及晶相进行表征,探讨了不同氧化时间、电压对纳米管阵列形貌的影响,微含水量下氧化电压可以适当增加,更容易得到规整的长纳米管阵列;通过测定样品的光电流和紫外-可见光漫反射吸收光谱,研究分析了含水量以及超声工艺对纳米管光吸收及光电流特性,微含水量下得到的纳米管阵列可见光吸收边红移至420nm,对480~700nm可见光有明显的光吸收,光电流显著增大;丙酮作为超声介质可有效去除纳米管阵列表面的集束,能进一步提高纳米管阵列的光电性能。     

三维分级结构氢氧化钴的合成

以硝酸钴为钴源,采用十六烷基三甲基溴化铵(CTAB)辅助,通过水热法合成了具有三维分级结构的β-Co(OH)2微球.采用粉末X射线衍射(XRD)、能谱元素分析(EDS)和扫描电镜(SEM)对产物进行表征.实验结果表明,产物β-Co(OH)2为由直径1～2μm和厚度约500nm的纳米板组装而成的微球.考察了CTAB的浓度、pH值和温度对产物形貌的影响.结果表明,CTAB的浓度和pH值对最终产物的形貌具有重要影响,而当水热温度在140～180℃区间内,反应温度对产物的形貌无影响.通过监控不同反应时间所获产物的形貌,初步探讨了三维结构的β-Co(OH)2的生长机制.     

阳极氧化法制备二氧化钛纳米管阵列的研究

采用电化学阳极氧化法,将纯钛浸入HF酸水溶液,在钛基体表面原位构建高度有序的二氧化钛纳米管阵列,探讨阳极氧化电压、电解液浓度和电解液温度等对二氧化钛纳米管阵列尺寸和形貌的影响。通过SEM、XRD对二氧化钛纳米管阵列的结构特征进行表征,结果表明,不同的阳极氧化电压、电解液浓度和温度都将影响TiO2纳米管阵列的尺寸和形貌,在阳极氧化电压为20V,HF电解液浓度为0.5%t条件下,可制备出结构规整有序的TiO2纳米管阵列。     

微含水量电解液中高管径比TiO2纳米管阵列的制备

通过阳极氧化法在微含水量为0.5wt%的NH₄F/乙二醇/H₂O酸性电解质体系中制备了管径大、高管径比的二氧化钛（TiO₂）纳米管阵列。采用SEM、XRD等测试手段对TiO₂纳米管阵列形貌及晶相进行表征,探讨了不同氧化时间、电压对纳米管阵列形貌的影响,微含水量下氧化电压可以适当增加,更容易得到规整的长纳米管阵列;通过测定样品的光电流和紫外-可见光漫反射吸收光谱,研究分析了含水量以及超声工艺对纳米管光吸收及光电流特性,微含水量下得到的纳米管阵列可见光吸收边红移至420nm,对480~700nm可见光有明显的光吸收,光电流显著增大;丙酮作为超声介质可有效去除纳米管阵列表面的集束,能进一步提高纳米管阵列的光电性能。     

表面电性可控的磁性微球的制备、表征及其在基因组DNA萃取中的应用

运用水热法、St?ber法制备了具有核壳型结构的超顺磁性Fe3 O4@SiO2微球,运用氨丙基三乙氧基硅烷( APTES)对Fe3 O4@SiO2微球表面进行修饰,得到表面电性可控的氨基化Fe3 O4@SiO2磁性微球,运用透射、扫描电镜表征微球形貌,采用Zeta电位研究微球表面的荷电特性。将氨基化Fe3 O4@SiO2微球用于人类全血中基因组脱氧核糖核酸( DNA)的萃取,开发了固相萃取方法,并探究微球与DNA的作用机理,对提取产物进行凝胶电泳和PCR实验。结果表明,自制的微球成功地从全血中提取出纯度较高的基因组DNA,提取率约70%,微球对基因组DNA的饱和吸附量约为40 ng/μg,提取液可直接用于进一步的生物分析。     

二氧化钛纳米棒在空心微球表面的定向生长

通过表面预处理和水热法开展了用二氧化钛包覆空心微球的研究, 用扫描电子显微镜(SEM)和X射线衍射仪(XRD)等表征了所得产品, 并探索了各种反应参数对产物形貌和结构的调控作用. 实验结果表明, 空心微球的表面溶胶-凝胶预处理至关重要. 采用表面溶胶-凝胶技术预处理空心微球表面, 然后在一定条件下进行水热反应, 我们在空心微球表面上成功地包覆了垂直于微球表面并紧密排列的锐钛矿型二氧化钛纳米棒. 该材料质轻、耐腐蚀, 有望成为一种新型光催化剂, 应用于治理水体表面的大面积污染.     

微乳法制备Co3O4纳米材料及其形成机理研究

采用Co(NH3)6Cl3为钴源,利用微乳法制备了Co3O4的纳米材料,可控合成了尺寸均一的边长约40～50 nm纳米立方和直径约400 nm的纳米球.并且考察了反应条件对产物形貌的影响,水与CTAB的摩尔比(w)和反应物浓度对产物形貌有着很大的影响,而反应温度对产物形貌基本没有影响.随着w值的增加,合成的纳米材料的尺...     

硫掺杂钛酸(盐)纳米管的表征与可见光光催化活性

以二硫化钛为钛源和硫源,通过与NaOH水热反应成功制备了硫掺杂钛酸(盐)纳米管。 采用X射线衍射、高分辨透射电子显微镜、扫描电子显微镜、扩展X射线吸收精细结构(EXAFS)和X光微区分析等手段对所制备的硫掺杂钛酸(盐)纳米管的结构、形貌、硫掺杂状态和掺杂量进行了表征,并以可见光光催化氧化乙醇反应为探针,采用原位气相色谱技术研究了硫掺杂钛酸纳米管的可见光光催化活性;结果表明,S原子以S2-形式取代了钛酸纳米管骨架中O原子的位置, 有效实现了硫掺杂;硫掺杂钛酸(盐)纳米管壁厚平均尺寸为2.9 nm,管径平均尺寸为9.7 nm。 可见光光催化氧化乙醇反应结果表明,掺硫钛酸纳米管在极低的掺硫量条件下,表现出比未掺杂的二氧化钛纳米管具有更高的可见光光催化活性。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.