体液中-叶萩碱检测方法的研究

本文报道了用气相色谱(GC)及气相色谱-质谱联用(GC/MS)检出人体液中一叶萩碱的方法.尿样经碱化后用乙醚直接萃取,回收率为72.1％;血浆样品用Sep-pak小柱提取,回收率为 43.9％,GC/MS的检测限为 20ng.方法快速、简便、准确.     

气相色谱-质谱方法检测磺酸类阴离子表面活性剂

使用K I/DMF/(CF3CO)2O还原衍生方法,结合气相色谱-质谱(GC/MS)联用技术对磺酸类化合物进行了结构鉴定和成分分析。实验结果表明,这种新的还原衍生方法不仅方便快速、条件易控,而且产物稳定,具有良好的气相色谱-质谱行为,可以很好地解决磺酸类阴离子表面活性剂有效成分分析鉴定的难题。     

羟乙基淀粉的羟乙基取代位置的研究

将羟乙基淀粉进行甲基化-水解-还原乙酰化反应，产生羟乙基葡萄糖的部分甲基化糖醇乙酸酯衍生物，应用气相色谱/化学电离质谱（GC/CIMS）和气相色谱/电子轰击质谱/质谱（GC/EIMS/MS）联用技术研究了羟乙基在淀粉糖环上的取代位置，发现G-2位取代的量是总取代量的82.0％。     

固相微萃取-气相色谱/质谱联用快速鉴定香稻香味特征化合物2-乙酰基吡咯啉

建立了固相微萃取-气相色谱/质谱(SPME-GC/MS)联用快速鉴定香稻香味特征化舍物2-乙酰基吡咯啉的方法.香米加入内标物2,4,6-三甲基吡啶,密封,在80℃水浴条件下经固相微萃取(萃取纤维头为100 μm聚二甲基硅氧烷)提取2 h,提取物经毛细管气相色谱柱HP-5MS(30 mx0.25mm×0.25μm)分离,...     

快速溶剂萃取-气相色谱/质谱联用测定塑料桌布中的邻苯二甲酸酯

采用快速溶剂萃取-气相色谱/质谱联用法(ASE-GC/MS)和超声波萃取-气相色谱/质谱联用法(USE-GC/MS)测定了塑料桌布中的邻苯二甲酸酯.结果表明:ASE-GC/MS的测量精度优于USE-GC/MS,后者测量值大约为前者的五分之四;ASE-GC/MS的回收率为89.0%～95.5%,相对标准偏差为4.3%～1...     

裂解同时烷基化气相色谱/质谱鉴定醇酸树脂

 用裂解同时烷基化气相色谱-质谱联用技术（SPM-GC-MS）对不同类型的醇酸树脂进行分析研究,将衍生化试剂四甲基氢氧化胺与样品同时裂解,经高效毛细管气相色谱分离,质谱鉴定,可区分醇酸树脂中的多元醇、多元酸、植物油类型,由此对改性醇酸树脂作结构鉴定。与直接裂解-气相色谱-质谱联用技术比较,具有样品前处理快速、简单,用量少,灵敏度高,定性准确,谱图直观等特点。     

固相微萃取/气相色谱/质谱联用技术在农药残留物分析中的应用

综述了固相微萃取／气相色谱／质谱（SPME／GC／MS）在各种环境水、土壤等样品中农药残留分析中的应用和发展。SPME／GC／MS联用技术具有快速、简便、准确等优点。     

质谱分析技术在纺织品检测方面的应用

介绍纺织品中有害物质标准检测方法中质谱分析技术的应用,概述了气相色谱-质谱联用、高效液相色谱-质谱联用和电感耦合等离子体-质谱联用技术在纺织品检测方面的广泛应用及其发展前景.     

顶空-气相色谱-质谱联用分析桂花和叶中挥发性成分

采用谱库检索结合准确质量测定、保留指数、串联质谱技术的多维定性分析策略鉴定化合物, 能够提高定性分析的效率和准确性. 运用顶空-气相色谱-四极质谱、顶空-气相色谱-飞行时间质谱以及顶空-气相色谱-串联质谱联用技术对桂花样品进行了分析检测, 并采用多维定性分析思路对检出的挥发性成分进行了鉴定. 结果共确认出47种挥发性成分, 其中单萜类和倍半萜类化合物为主要组分. 该定性分析策略准确可靠, 可以广泛应用于复杂样品挥发性成分的定性分析中.     

灰化法气相色谱/质谱法测定奶粉中碘的研究

采用气相色谱-质谱联用技术建立了一个快速、高灵敏测定奶粉中碘的新方法.用碱灰化法处理样品,丁酮衍生后用正己烷提取,无水硫酸钠脱水,HP-5MS柱气相色谱分离后用质谱在选择离子模式下测定,外标法定量.该方法的回收率在77%～110%之间,相对标准偏差小于10%,检出限为0.1 mg/kg.实验表明氯离子、溴离子都不干扰测定,方法的选择性好.     

Identification of certain chemical agents in complex organic solutions by gas chromatography/tandem mass spectrometry

Analytical methods that are used for the detection and identification of chemicals related to the Chemical Weapons Convention in complex organic solutions were developed. A matrix modified by the addition of complex diesel oil background compounds and interferences was used for the development of a gas chromatography-mass spectrometry or gas chromatography-tandem mass spectrometry (GC-MS or GC-MS/MS) method for unambiguous identification of the scheduled chemicals. Co-elution of diethyl N,N-dimethylphosphoramidate and ethyl N,N-dimethylphosphoramidocyanidate, which are not separated by GC, was identified by GC-MS. Although GC-MS can identify the compounds, GC-MS/MS identification has greater accuracy and sensitivity in the case of complex matrixes. Four scheduled chemicals were accurately and selectively identified against numerous interfering substances by GC-MS/MS. The fragmentation chemistry of these compounds using MS/MS analysis was investigated.     

Analysis of poly-beta-hydroxybutyrate in environmental samples by GC-MS/MS

Application of gas chromatography-mass spectrometry (GC-MS) can significantly improve trace analyses of compounds in complex matrices from natural environments compared to gas chromatography only. A GC-MS/MS technique for determination of poly-beta-hydroxybutyrate (PHB), a bacterial storage compound, has been developed and used for analysis of two soils stored for up to 319 d, fresh samples of sewage sludge, as well as a pure culture of Bacillus megaterium. Specific derivatization of beta-hydroxybutyrate (3-OH C4:0) PHB monomer units by N-tert-butyl-dimethylsilyl-N-methyltrifluoracetamide (MTBSTFA) improved chromatographic and mass spectrometric properties of the analyte. The diagnostic fragmentation scheme of the derivates tert-butyldimethylsilyl ester and ether of beta-hydroxybutyric acid (MTBSTFA-HB) essential for the PHB identification was shown. The ion trap MS was used, therefore the scan gave the best sensitivity and with MS/MS the noise decreased, so the S/N was better and also with second fragmentation the amount of ions increased compared to SIM. The detection limit for MTBSTFA-HB by GC-MS/MS was about 10(-13) g microL(-1) of injected volume, while by GC (FID) and GC-MS (scan) it was around 10(-10) g microL(-1) of injected volume. Sensitivity of GC-MS/MS measurements of PHB in arable soil and activated sludge samples was down to 10 pg of PHB g(-1) dry matter. Comparison of MTBSTFA-HB detection in natural soil sample by GC (FID), GC-MS (scan) and by GC-MS/MS demonstrated potentials and limitations of the individual measurement techniques.     

Global and selective detection of organohalogens in environmental samples by comprehensive two-dimensional gas chromatography-tandem mass spectrometry and high-resolution time-of-flight mass spectrometry

We successfully detected halogenated compounds from several kinds of environmental samples by using a comprehensive two-dimensional gas chromatograph coupled with a tandem mass spectrometer (GC×GC-MS/MS). For the global detection of organohalogens, fly ash sample extracts were directly measured without any cleanup process. The global and selective detection of halogenated compounds was achieved by neutral loss scans of chlorine, bromine and/or fluorine using an MS/MS. It was also possible to search for and identify compounds using two-dimensional mass chromatograms and mass profiles obtained from measurements of the same sample with a GC×GC-high resolution time-of-flight mass spectrometer (HRTofMS) under the same conditions as those used for the GC×GC-MS/MS. In this study, novel software tools were also developed to help find target (halogenated) compounds in the data provided by a GC×GC-HRTofMS. As a result, many dioxin and polychlorinated biphenyl congeners and many other halogenated compounds were found in fly ash extract and sediment samples. By extracting the desired information, which concerned organohalogens in this study, from huge quantities of data with the GC×GC-HRTofMS, we reveal the possibility of realizing the total global detection of compounds with one GC measurement of a sample without any pre-treatment.     

气相色谱-质谱法检测饮用水新生含氮消毒副产物氯代乙酰胺

建立了气相色谱-质谱(GC-MS)法检测饮用水中新生致突变含氮消毒副产物(N-DBPs)二乙酰胺(DCAcAm)和三乙酰胺(TCAcAm)的分析方法.考察了GC/MS和GC/ECD两种检测仪器及不同样品前处理技术对氯代乙酰胺(CAcAms)的检测效果.对比发现,酸催化水解+GC/ECD的分析方法容易受其它消毒副产物(DBPs)的影响,直接液液萃取(LLE)+GC/MS更适合CAcAms的分析;乙酸乙酯(ETAC)的萃取效果优于DBPs分析常用萃取剂甲基叔丁基醚(MTBE).在选定条件下,DAcAm和TAcAm在10～1000 μg/L的范围内线性关系良好,r＞0.9995; 方法回收率在82.0%～111.9%之间;RSD小于10%;检出限(MDL)和测定限(RQL)均低于1 μg/L.     

Flow modulation comprehensive two-dimensional gas chromatography-mass spectrometry with a supersonic molecular beam

A new approach of flow modulation comprehensive two-dimensional gas chromatography-mass spectrometry (GC x GC-MS) with supersonic molecular beam (SMB) and a quadrupole mass analyzer is presented. Flow modulation uniquely enables GC x GC-MS to be achieved even with the limited scan speed of quadrupole MS, and its 20 ml/min column flow rate is handled, splitless, by the SMB interface. Flow modulation GC x GC-SMB-MS shares all the major benefits of GC x GC and combines them with GC-MS including: (a) increased GC separation capability; (b) improved sensitivity via narrower GC peaks; (c) improved sensitivity through reduced matrix interference and chemical noise; (d) polarity and functional group sample information via the order of elution from the second polar column. In addition, GC x GC-SMB-MS is uniquely characterized by the features of GC-MS with SMB of enhanced and trustworthy molecular ion plus isotope abundance analysis (IAA) for improved sample identification and fast fly-through ion source response time. The combination of flow modulation GC x GC with GC-MS with SMB (supersonic GC-MS) was explored with complex matrices such as diesel fuel analysis and pesticide analysis in agricultural products.     

Application of comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry in the analysis of volatile oil of traditional Chinese medicines

This paper reports comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (GC x GC-TOF MS) analysis of Pogostemon cablin Benth (Cablin Parchouli) volatile oil. The suitable column system and operation conditions were chosen on the basis of the properties of composition of the volatile oil. One-dimensional gas chromatography (ID-GC) and GC x GC, GC-MS and GC x GC-TOF MS were compared under appropriate conditions, and the enhanced sensitivity and superior resolution of GC x GC were demonstrated. 394 components were tentatively identified by GC x GC-TOF MS.     

Analysis of poly-β-hydroxybutyrate in environmental samples by GC-MS/MS

Application of gas chromatography-mass spectrometry (GC-MS) can significantly improve trace analyses of compounds in complex matrices from natural environments compared to gas chromatography only. A GC-MS/MS technique for determination of poly-β-hydroxybutyrate (PHB), a bacterial storage compound, has been developed and used for analysis of two soils stored for up to 319 d, fresh samples of sewage sludge, as well as a pure culture of Bacillus megaterium. Specific derivatization ¶of β-hydroxybutyrate (3-OH C_4?:?0) PHB monomer units by N-tert-butyl-dimethylsilyl-N-methyltrifluoracetamide (MTBSTFA) improved chromatographic and mass spectrometric properties of the analyte. The diagnostic fragmentation scheme of the derivates tert-butyldimethylsilyl ester and ether of β-hydroxybutyric acid (MTBSTFA-HB) essential for the PHB identification was shown. The ion trap MS was used, therefore the scan gave the best sensitivity and with MS/MS the noise decreased, so the S/N was better and also with second fragmentation the amount of ions increased compared to SIM. The detection limit for MTBSTFA-HB by GC-MS/MS was about 10^–13 g μL^–1 of injected volume, while by GC (FID) and GC-MS (scan) it was around 10^–10 g μL^–1 of injected volume. Sensitivity of GC-MS/MS measurements of PHB in arable soil and activated sludge samples was down to 10 pg of PHB g^–1 dry matter. Comparison of MTBSTFA-HB detection in natural soil sample by GC (FID), GC-MS (scan) and by GC-MS/MS demonstrated potentials and limitations of the individual measurement techniques.     

The importance of GC and GC-MS in perfume analysis

Gas chromatography (GC) and mass spectrometry (MS) are by far the most important analytical techniques in the perfume industry. Both perfume houses (the suppliers) and the home and personal-care companies (the clients) rely primarily on GC and GC-MS for unraveling the composition of perfumes (i.e. perfume formulation), quality control, competitor analysis and trace analysis on substrates and in the headspace. State-of-the-art perfume formulation is based on perfume-specific Kovats Index (KI) and MS databases. By applying FID (flame-ionization detector) response-correction factors, the accuracy of the perfume-formulation process can be further improved. Because of the complexity of perfumes, use is made of GC columns and conditions that offer maximum resolution rather than minimum analysis time. Mass-spectral deconvolution tools can be very useful in identifying perfume ingredients from GC-MS data in cases of co-elution or strong matrix interference. By applying the MS detector in the selected ion monitoring (SIM) mode, GC-MS is very suitable for trace analysis of perfume ingredients, thus enabling the study of perfume efficacy during use of home and personal-care products. Recent developments in the field of comprehensive GC (i.e. GC×GC) also seem very promising for perfume analysis.     

Pulsed flow modulation two-dimensional comprehensive gas chromatography-tandem mass spectrometry with supersonic molecular beams

Pulsed flow modulation (PFM) two-dimensional comprehensive gas chromatography (GC x GC) was combined with quadrupole-based mass spectrometry (MS) via a supersonic molecular beam (SMB) interface using a triple-quadrupole system as the base platform, which enabled tandem mass spectrometry (MS-MS). PFM is a simple GC x GC modulator that does not consume cryogenic gases while providing tunable second GC x GC column injection time for enabling the use of quadrupole-based mass spectrometry regardless its limited scanning speed. The 20-ml/min second column flow rate involved with PFM is handled, splitless, by the SMB interface without affecting the sensitivity. The combinations of PFM GC x GC-MS with SMB and PFM GC x GC-MS-MS with SMB were explored with the analysis of diazinon and permethrin in coriander. PFM GC x GC-MS with SMB is characterized by enhanced molecular ion and tailing-free fast ion source response time. It enables universal pesticide analysis with full scan and data analysis with reconstructed single ion monitoring on the enhanced molecular ion and another prominent high mass fragment ion. The elimination of the third fragment ion used in standard three ions method results in significantly reduced matrix interference. GC x GC-MS with SMB improves the GC separation, and thereby our ability for sample identification using libraries. GC-MS-MS with SMB provides better reduction (elimination) of matrix interference than GC x GC-MS. However, it is a target method, which is not always applicable. GC x GC-MS-MS does not seem to further reduce matrix interferences over GC-MS-MS and unlike GC x GC-MS, it is incompatible with library identification, but it is beneficial to have both GC x GC and MS-MS capabilities in the same system.     

Selected ion storage versus tandem MS/MS for organochlorine pesticides determination in drinking waters with SPME and GC-MS

The use of two modes for mass spectrometry (MS) detection with an ion trap instrument, selected ion storage (SIS) and tandem mass spectrometry (MS/MS), are compared for the solid-phase microextraction (SPME)–gas chromatography (GC) coupled to mass spectrometry (GC-MS) determination of 16 priority organochlorine pesticides (OCPs) in drinking water samples at the ultratrace levels (ng?L^?1) required by official guidelines in the European legislation. Experimental parameters investigated for the SPME sample preparation were: the type of coating (100?µm polydimethylsiloxane, PDMS, and 65?µm poly(dimethylsiloxane)–divinylbenzene, PDMS/DVB), SPME modality, extraction and desorption times and desorption temperature and the methanol percentage in the SPME working solution. Under the calculated optimal conditions two methodologies were developed, one for SIS and the other for MS/MS modes. The detection limits, precision and accuracy were evaluated for both alternatives and were appropriate to the official guidelines requirements. The SPME–GC-MS(SIS) methodology offered LODs from 0.2–6.6?ng?L^?1, precision below 13% and recoveries between 83 and 110%. The SPME–GC–MS/MS methodology provided limits of detection (LODs) ranging from 0.3 to 7.6 ng?L^?1, % RSD were ≤14% and recoveries of 79–108% were achieved. After the results observed within an Interlaboratory Exercise, the latest MS methodology was selected for the pursued analysis in real drinking water samples. Also, the good results in this round-robin exercise validate the proposed SPME–GC–MS/MS methodology.