A pneumatic micro cell chip for the differentiation of human mesenchymal stem cells under mechanical stimulation

A new micro cell chip which can induce stem cells to differentiate into specific body cell types has been designed and fabricated for tissue engineering. This paper presents the test results of a micro cell stimulator which can provide a new miniaturized tool in cell stimulation, culture and analysis for stem cell research. The micro cell stimulator is designed to apply compressive pressure to the hMSCs (human mesenchymal stem cells) for inducing osteogenesis. The micro cell stimulator is based on the pneumatic actuator with a flexible diaphragm which consists of an air chamber and cell chambers. The hMSCs under cyclic compressive stimulation for one week were observed and assessed by monitoring CD90 (Thy-1), actin, alkaline phosphatase (ALP) and alizarin red expression. The results suggest that cyclic mechanical stimulation is attributed to the different phenomenon of cultured hMSCs in cell proliferation and differentiation. These results are important for the feasibility of the micro cell stimulator to provide the reduction of the necessary quantity of cells, process cost and the increase of the throughput.     

Mineralized Synthetic Matrices as an Instructive Microenvironment for Osteogenic Differentiation of Human Mesenchymal Stem Cells

The effect of substrate‐mediated signals on osteogenic differentiation of hMSCs is studied using a synthetic bone‐like material comprising both organic and inorganic components that supports adhesion, spreading, and proliferation of hMSCs. hMSCs undergo osteogenic differentiation even in the absence of osteogenesis‐inducing supplements. They exhibit higher expressions of Runx2, BSP, and OCN compared to their matrix‐rigidity‐matched, non‐mineralized hydrogel counterparts. The mineralized‐hydrogel‐assisted osteogenic differentiation of hMSCs could be attributed to their exposure to high local concentrations of calcium and phosphate ions in conjunction with chemical and topological cues arising from the hydrogel‐bound calcium phosphate mineral layer.

     

Stabilizer‐Free Poly(lactide‐co‐glycolide) Nanoparticles Conjugated with Quantum Dots as a Potential Carrier Applied in Human Mesenchymal Stem Cells

We report that human mesenchymal stem cells (hMSCs) were successfully labeled with poly(lactide‐co‐glycolide) nanoparticles (PLGA NPs) surface‐conjugated quantum dots (QDs) (PLGA‐QD NPs) via endocytosis pathway. These NPs were not toxicity even treated with PLGA‐QD NPs at high concentrations for at least four weeks. Besides, PLGA‐QD NPs‐labeled hMSCs did not change their proliferation and differentiation capability toward the cell fates of adipocytes, osteocytes, and chrondrocytes. It's known that PLGA has been widely employed to act as delivery carrier which encapsulates drugs and releases them under a controlled way. Currently, we have also demonstrated that FITC‐loaded PLGA‐QD NPs degraded in hMSCs to achieve intracellular release of FITC. The aim of this research is to investigate viability, proliferation and differentiation capability and the potential for gene delivery of MSCs labeled with PLGA‐QD NPs. In addition to PLGA‐QD NPs, QDs alone were used to serve as a control set for comparison.     

Design of Polymeric Culture Substrates to Promote Proangiogenic Potential of Stem Cells

Stem cells are a promising cell source for regenerative medicine due to their differentiation and self‐renewal capacities. In the field of regenerative medicine and tissue engineering, a variety of biomedical technologies have been tested to improve proangiogenic activities of stem cells. However, their therapeutic effect is found to be limited in the clinic because of cell loss, senescence, and insufficient therapeutic activities. To address this type of issue, advanced techniques for biomaterial synthesis and fabrication have been approached to mimic proangiogenic microenvironment and to direct proangiogenic activities. This review highlights the types of polymers and design strategies that have been studied to promote proangiogenic activities of stem cells. In particular, scaffolds, hydrogels, and surface topographies, as well as insight into their underlying mechanisms to improve proangiogenic activities are the focuses. The strategy to promote angiogenic activities of hMSCs by controlling substrate repellency is introduced, and the future direction is proposed.     

Photocontrolled Multidirectional Differentiation of Mesenchymal Stem Cells on an Upconversion Substrate

The effective guidance of mesenchymal stem cell (MSC) differentiation on a substrate by near‐infrared (NIR) light is particularly attractive for tissue engineering and regenerative medicine. However, most of current substrates cannot control multidirectional differentiation of MSCs like natural tissues. Herein, a photocontrolled upconversion‐based substrate was designed and constructed for guiding multidirectional differentiation of MSCs. The substrate enables MSCs to maintain their stem‐cell characteristics due to the anti‐adhesive effect of 4‐(hydroxymethyl)‐3‐nitrobenzoic acid modified poly(ethylene glycol) (P1) attached on the upconversion substrate. Upon NIR irradiation, the P1 is released from the substrate by photocleavage. The detachment of P1 can change cell–matrix interactions dynamically. Moreover, MSCs cultured on the upconversion substrate can be specifically induced to differentiate to adipocytes or osteoblasts by adjusting the NIR laser. Our work provides a new way of using NIR‐based upconversion substrate to modulate the multidirectional differentiation of MSCs.     

3D Microfibrous Scaffolds Selectively Promotes Proliferation and Glial Differentiation of Adult Neural Stem Cells: A Platform to Tune Cellular Behavior in Neural Tissue Engineering

Biomaterials are essential for the development of innovative biomedical and therapeutic applications. Biomaterials‐based scaffolds can influence directed cell differentiation to improve cell‐based strategies. Using a novel microfluidics approach, poly (ε‐caprolactone) (PCL), is used to fabricate microfibers with varying diameters (3–40 µm) and topographies (straight and wavy). Multipotent adult rat hippocampal stem/progenitor cells (AHPCs) are cultured on 3D aligned PCL microfibrous scaffolds to investigate their ability to differentiate into neurons, astrocytes, and oligodendrocytes. The results indicate that the PCL microfibers significantly enhance proliferation of the AHPCs compared to control, 2D planar substrates. While the AHPCs maintained their multipotent differentiation capacity when cultured on the PCL scaffolds, there is a significant and dramatic increase in immunolabeling for astrocyte and oligodendrocyte differentiation when compared with growth on planar surfaces. Our results show a 3.5‐fold increase in proliferation and 23.4‐fold increase in astrocyte differentiation for cells on microfibers. Transplantation of neural stem/progenitor cells within a PCL microfiber scaffold may provide important biological and topographic cues that facilitate the survival, selective differentiation, and integration of transplanted cells to improve therapeutic strategies.     

Raman spectroscopic monitoring of the osteogenic differentiation of human mesenchymal stem cells

The differentiation of stem cells into multi-lineages is essential to aid the development of tissue engineered materials that replicate the functionality of their tissue of origin. For this study, Raman spectroscopy was used to monitor the formation of a bone-like apatite mineral during the differentiation of human mesenchymal stem cells (hMSCs) towards an osteogenic lineage. Raman spectroscopy observed dramatic changes in the region dominated by the stretching of phosphate groups (950-970 cm(-1)) during the period of 7-28 days. Changes were also seen at 1030 cm(-1) and 1070 cm(-1), which are associated with the P-O symmetric stretch of PO(4)(3-) and the C-O vibration in the plane stretch of CO(3)(2-). Multivariate factor analysis revealed the presence of various mineral species throughout the 28 day culture period. Bone mineral formation was observed first at day 14 and was identified as a crystalline, non-substituted apatite. During the later stages of culture, different mineral species were observed, namely an amorphous apatite and a carbonate, substituted apatite, all of which are known to be Raman markers for a bone-like material. Band area ratios revealed that both the carbonate-to-phosphate and mineral-to-matrix ratios increased with age. When taken together, these findings suggest that the osteogenic differentiation of hMSCs at early stages resembles endochondral ossification. Due to the various mineral species observed, namely a disordered amorphous apatite, a B-type carbonate-substituted apatite and a crystalline non-substituted hydroxyapatite, it is suggested that the bone-like mineral observed here can be compared to native bone. This work demonstrates the successful application of Raman spectroscopy combined with biological and multivariate analyses for monitoring the various mineral species, degree of mineralisation and the crystallinity of hMSCs as they differentiate into osteoblasts.     

A fast on-demand preparation of injectable self-healing nanocomposite hydrogels for efficient osteoinduction

Injectable hydrogels have been considered as promising materials for bone regeneration,but their osteoinduction and mechanical performance are yet to be improved.In this study,a novel biocompatible injectable and self-healing nano hybrid hydrogel was on-demand prepared via a fast(within 30 s) and easy gelation approach by reversible Schiff base formed between-CH=O of oxidized sodium alginate(OSA) and-NH_2 of glycol chitosan(GCS) mixed with calcium phosphate nanoparticles(CaP NPs).Its raw materials can be ready in large quantities by a simple synthesis process.The mechanical strength,degradation and swelling behavior of the hydrogel can be readily controlled by simply controlling the molar ratio of-CH=O and-NH_2.This hydrogel exhibits pH responsiveness,good degradability and biocompatibility.The hydrogel used as the matrix for mesenchymal stem cells can significantly induce the proliferation,differentiation and osteoinduction in vitro.These results showed this novel hydrogel is an ideal candidate for applications in bone tissue regeneration and drug delivery.     

Self‐Assembled Peptide‐Based Hydrogels as Scaffolds for Proliferation and Multi‐Differentiation of Mesenchymal Stem Cells

Fluorenyl‐9‐methoxycarbonyl (Fmoc)‐diphenylalanine (Fmoc‐FF) and Fmoc‐arginine‐glycine‐­aspartate (Fmoc‐RGD) peptides self‐assemble to form a 3D network of supramolecular hydrogel (Fmoc‐FF/Fmoc‐RGD), which provides a nanofibrous network that uniquely presents bioactive ligands at the fiber surface for cell attachment. In the present study, mesenchymal stem cells (MSCs) in Fmoc‐FF/Fmoc‐RGD hydrogel increase in proliferation and survival compared to those in Fmoc‐FF/Fmoc‐RGE hydrogel. Moreover, MSCs encapsulated in Fmoc‐FF/Fmoc‐RGD hydrogel and induced in each defined induction medium undergo in vitro osteogenic, adipogenic, and chondrogenic differentiation. For in vivo differentiation, MSCs encapsulated in hydrogel are induced in each defined medium for one week, followed by injection into gelatin sponges and transplantation into immunodeficient mice for four weeks. MSCs in Fmoc‐FF/Fmoc‐RGD hydrogel increase in differentiation into osteogenic, adipogenic, and chondrogenic differentiation, compared to those in Fmoc‐FF/Fmoc‐RGE hydrogel. This study concludes that nanofibers formed by the self‐assembly of Fmoc‐FF and Fmoc‐RGD are suitable for the attachment, proliferation, and multi‐differentiation of MSCs, and can be applied in musculoskeletal tissue engineering.

     

Conductive Tough Hydrogel for Bioapplications

Biocompatible conductive tough hydrogels represent a new class of advanced materials combining the properties of tough hydrogels and biocompatible conductors. Here, a simple method, to achieve a self‐assembled tough elastomeric composite structure that is biocompatible, conductive, and with high flexibility, is reported. The hydrogel comprises polyether‐based liner polyurethane (PU), poly(3,4‐ethylenedioxythiophene) (PEDOT) doped with poly(4‐styrenesulfonate) (PSS), and liquid crystal graphene oxide (LCGO). The polyurethane hybrid composite (PUHC) containing the PEDOT:PSS, LCGO, and PU has a higher electrical conductivity (10 × ), tensile modulus (>1.6 × ), and yield strength (>1.56 × ) compared to respective control samples. Furthermore, the PUHC is biocompatible and can support human neural stem cell (NSC) growth and differentiation to neurons and supporting neuroglia. Moreover, the stimulation of PUHC enhances NSC differentiation with enhanced neuritogenesis compared to unstimulated cultures. A model describing the synergistic effects of the PUHC components and their influence on the uniformity, biocompatibility, and electromechanical properties of the hydrogel is presented.     

Uniform‐sized neurosphere‐mediated motoneuron differentiation in microwell arrays

We developed the photocrosslinkable hydrogel microwell arrays for uniform‐sized neurosphere‐mediated motoneuron differentiation. Neural stem cells (NSCs) were obtained from embryonic cerebral cortex and spinal cord. To generate uniform‐sized neurospheres in a homogeneous manner, the dissociated cells were cultured in the hydrogel microwell arrays for 3 days. Uniform‐sized neurospheres harvested from microwell arrays were replated into laminin‐coated substrate. In parallel, uniform‐sized neurospheres cultured in microwell arrays were encapsulated by photocrosslinkable gelatin methacrylate hydrogels in a three‐dimensional manner. We demonstrated the effect of hydrogel microwell sizes (e.g., 50, 100, 150 μm in diameter) on motoneuron differentiation, showing that the largest uniform‐sized neurospheres derived from embryonic spinal cord efficiently differentiated into motoneurons. Therefore, this hydrogel microwell array could be a powerful array to regulate the uniform‐sized neurosphere‐mediated motoneuron differentiation.     

Developing a self-assembled monolayer microarray to study stem cell differentiation

We have developed a novel strategy to generate self-assembled monolayer microarray (SAMs-Array) of alkanethiolates on gold surfaces for the study of human mesenchymal stem cells (hMSCs) differentiation. Electroactive alkanethiols were microarray-printed in varying densities to probe the chemical effects on stem cell differentiation. Cyclic voltammetry (CV) was used for the precise determination of the amount of alkanethiol molecules transferred and SAMs formed on the microarray. We can also control the oxidative and reductive state of each molecule displayed to cells by CV. Based on this SAMs-Array technology, we generated a platform for potential high-throughput screening of various surface chemistry effects on cell behaviors for future applications in biomaterials and tissue engineering.     

Heparin Interacting Protein Mediated Assembly of Nano‐Fibrous Hydrogel Scaffolds for Guided Stem Cell Differentiation

A new methodology is developed to conjugate hyaluronic acid (HA) hydrogel with novel nano‐fibrous architectures via non‐covalent assembly that specifically allows for targeted adipose‐derived stem cells (ASCs) differentiation and soft tissue engineering. The assembly of non‐covalently associated hydrogel network produced via the interaction of a low molecular weight heparin (LMWH) modified HA derivative and heparin interacting protein (HIP). The multifunctional star poly(ethylene glycol) (PEG) and HIP copolymer has the capability to mediate the non‐covalent assembly of nano‐fibrous HA hydrogel networks via affinity interactions with LMWH. The effect of the HIP mediation on in vitro gelation, rheological characteristics, degradation, equilibrium swelling, adipose‐derived stem cells (ASCs) proliferation and differentiation of nano‐fibrous hydrogel is examined. The results suggest the potential utility of this unique design of the bioactive nano‐fibrous HA hydrogel in directing the differentiation of ASCs and adipogenesis in ECM‐mimetic scaffolds in vitro. These studies demonstrate that this nano‐fibrous HA hydrogel can render the formulation of a therapeutically effective platform for in vitro adipogenesis applications.

     

Long‐Lived Engineering of Glycans to Direct Stem Cell Fate

Glycans mediate many critical, long‐term biological processes, such as stem cell differentiation. However, few methods are available for the sustained remodeling of cells with specific glycan structures. A new strategy that enables the long‐lived presentation of defined glycosaminoglycans on cell surfaces using HaloTag proteins (HTPs) as anchors is reported. By controlling the sulfation patterns of heparan sulfate (HS) on pluripotent embryonic stem cell (ESC) membranes, it is demonstrated that specific glycans cause ESCs to undergo accelerated exit from self‐renewal and differentiation into neuronal cell types. Thus, the stable display of glycans on HTP scaffolds provides a powerful, versatile means to direct key signaling events and biological outcomes such as stem cell fate.     

Polypyrrole/Alginate Hybrid Hydrogels: Electrically Conductive and Soft Biomaterials for Human Mesenchymal Stem Cell Culture and Potential Neural Tissue Engineering Applications

Electrically conductive biomaterials that can efficiently deliver electrical signals to cells or improve electrical communication among cells have received considerable attention for potential tissue engineering applications. Conductive hydrogels are desirable particularly for neural applications, as they can provide electrical signals and soft microenvironments that can mimic native nerve tissues. In this study, conductive and soft polypyrrole/alginate (PPy/Alg) hydrogels are developed by chemically polymerizing PPy within ionically cross‐linked alginate hydrogel networks. The synthesized hydrogels exhibit a Young's modulus of 20–200 kPa. Electrical conductance of the PPy/Alg hydrogels could be enhanced by more than one order of magnitude compared to that of pristine alginate hydrogels. In vitro studies with human bone marrow‐derived mesenchymal stem cells (hMSCs) reveal that cell adhesion and growth are promoted on the PPy/Alg hydrogels. Additionally, the PPy/Alg hydrogels support and greatly enhance the expression of neural differentiation markers (i.e., Tuj1 and MAP2) of hMSCs compared to tissue culture plate controls. Subcutaneous implantation of the hydrogels for eight weeks induces mild inflammatory reactions. These soft and conductive hydrogels will serve as a useful platform to study the effects of electrical and mechanical signals on stem cells and/or neural cells and to develop multifunctional neural tissue engineering scaffolds.

     

Effect of Degree of Deacetylation of Chitosan/Chitin on Human Neural Stem Cell Culture

Stem cell therapy and research for neural diseases depends on reliable reproduction of neural stem cells. Chitosan-based materials have been proposed as a substrate for culturing human neural stem cells (hNSCs) in the pursuit of clinically compatible culture conditions that are chemically defined and compliant with good manufacturing practices. The physical and biochemical properties of chitosan and chitin are strongly regulated by the degree of deacetylation (DD). However, the effect of DD on hNSC behavior has not been systematically investigated. In this study, films with DD ranging from 93% to 14% are fabricated with chitosan and chitin. Under xeno-free conditions, hNSCs proliferate preferentially on films with a higher DD, exhibiting adherent morphology and retaining multipotency. Lowering the DD leads to formation of neural stem cell spheroids due to unsteady adhesion. The neural spheroids present NSC multipotency protein expression reduction and cytoplasmic translocation. This study provides an insight into the influence of the DD on hNSCs behavior and may serve as a guideline for hNSC research using chitosan-based biomaterials. It demonstrates the capability of controlling hNSC fate by simply tailoring the DD of chitosan.     

A novel silk/PES hybrid nanofibrous scaffold promotes the in vitro proliferation and differentiation of adipose‐derived mesenchymal stem cells into insulin producing cells

Using stem cells to replace the lost beta cells is a hopeful strategy in the treatment of diabetic patients. Furthermore, during stem cell culture and therapy, it is a need to use a substrate to act as a supportive matrix to mimic 3D in vivo microenvironment. Therefore, in this study, human adipose‐derived stem cells were used to differentiate into insulin‐producing cells (IPCs) on a silk/polyethersulfone (PES) scaffold. After exposing to the differentiation media, 2D and 3D (silk/PES) cultured cells were gradually aggregated and formed spherical shaped clusters. The viability of cells was comparable in both 3D and 2D culture. As the results of gene expression assay in both RNA and protein level showed, the differentiation efficiency was higher in 3D culture. Furthermore, ELISA revealed that the release of C‐peptide and insulin was higher in 3D than 2D culture. It seems that silk/PES nanofibrous hybrid scaffold could provide an appropriate matrix to mimic in vivo microenvironment and therefore increases the IPC differentiation potency of stem cells.     

Hydrogel Microchambers Integrated with Organic Electrodes for Efficient Electrical Stimulation of Human iPSC‐Derived Cardiomyocytes

A hydrogel‐based microchamber with organic electrodes for efficient electrical stimulations of human induced pluripotent stem cell‐derived cardiomyocytes (hiPSC‐CMs) is described. The microchamber is made from molecularly permeable, optically transparent, and electrically conductive polyvinyl alcohol (PVA) hydrogel and highly capacitive carbon electrode modified with poly(3,4‐ethylenedioxythiophene) (PEDOT). Spheroids of hiPSC‐CMs are cultured in microchambers, and electrically stimulated by the electrode for maturation. The large interfacial capacitance of the electrodes enables several days of electrical stimulation without generation of cytotoxic bubbles even when the electrodes are placed near the spheroids. The spheroids can be cultivated in the closed microchambers because of the permeated nutrients through the hydrogel, thus the spheroids are stably addressable and the culture medium around the sealed microchambers can be simply exchanged. Synchronized beating of the spheroids can be optically analyzed in situ, which makes it possible to selectively collect electrically responsive cells for further use. As the hydrogel is electrically conductive, the amount of electrical charge needed for maturing the spheroids can be reduced by configuring electrodes on the top and the bottom of the microchamber. The bioreactor will be useful for efficient production of matured hiPSC‐CMs for regenerative medicine and drug screening.