Immobilization of cerium (IV) and erbium (III) in mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for the synthesis of 5‐substituted tetrazoles,and chemo‐ and homoselective oxidation of sulfides

Two well‐ordered 2D ‐ hexagonal cerium (IV) and erbium (III) embedded functionalized mesoporous MCM ‐ 41(MCM‐41@Serine/Ce and MCM ‐ 41@Serine/Er) have been developed via functionalization of mesoporous MCM ‐ 41. The surface modification method has been used in the preparation of serine‐grafted MCM ‐ 41 and led to the development of MCM‐41@Serine. The reaction of MCM‐41@Serine with Ce (NH₄)₂(NO₃)₆·2H₂O or ErCl₃·6H₂O in ethanol under reflux led to the organization of MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts. The structures of these catalysts were determined using scanning electron microscopy, mapping, energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction, inductively coupled plasma, and Brunauer–Emmett–Teller analysis. These MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts show outstanding catalytic performance in sulfides oxidation and synthesis of 5‐substituted tetrazoles. These catalysts can be recycled for seven repeated reaction runs without showing a considerable decrease in catalytic performance.     

Bismuth‐Containing SBA‐15 Mesoporous Silica Catalysts for Solvent‐Free Liquid‐Phase Oxidation of Cyclohexane by Molecular Oxygen

Bismuth (Bi)‐containing SBA‐15 mesoporous silica catalysts, Bi/SBA‐15, with different Bi loadings were synthesized by a direct hydrothermal method. The materials were characterized in detail by various techniques. Powder‐X‐ray‐diffraction (PXRD), N₂‐adsorption/desorption, and transmission‐electron‐microscopic (TEM) analyses revealed that the well‐ordered hexagonal structure of SBA‐15 is maintained after Bi incorporation. Diffuse‐reflectance UV/VIS, Raman, and X‐ray photoelectron spectroscopy (XPS) showed that the incorporated Bi‐atoms are highly dispersed, most of them entering the internal surface of SBA‐15. The new, very stable catalysts were found to be highly efficient for the oxidation of cyclohexane in a solvent‐free system, molecular oxygen (O₂) being used as oxidant.     

Encapsulation of Homogeneous Catalysts in Mesoporous Materials Using Diffusion‐Limited Atomic Layer Deposition

The heterogenization of homogeneous metal complex catalysts has attracted great attention. The encapsulation of metal complexes into nanochannels of mesoporous materials is achieved by coating metal oxides at/near the pore entrance by diffusion‐limited atomic layer deposition (ALD) to produce a hollow plug. The pore size of the hollow plug is precisely controlled on the sub‐nanometer scale by the number of ALD cycles to fit various metal complexes with different molecular sizes. Typically, Co or Ti complexes are successfully encapsulated into the nanochannels of SBA‐15, SBA‐16, and MCM‐41. The encapsulated Co and Ti catalysts show excellent catalytic activity and reusability in the hydrolytic kinetic resolution of epoxides and asymmetric cyanosilylation of carbonyl compounds, respectively. This ALD‐assisted encapsulation method can be extended to the encapsulation of other homogeneous catalysts into different mesoporous materials for various heterogeneous reactions.     

Liquid Phase Hydrogenation of t,t,c‐1,5,9‐Cyclododecatriene over Ni/MCM‐41 and Ni/SiO2 Catalysts

Ni‐loaded pure siliceous and aluminosilicate MCM‐41 (Ni/MCM‐41) and nickel‐loaded silica (15Ni/SiO₂) were synthesized via wet impregnation and were characterized by various techniques. The H₂ consumption in the TPR analysis was found to be proportional to the Ni amount in the calcined samples. After reduction the average Ni particle sizes of 15Ni/MCM‐41 and 15Ni/SiO₂ were 9–12 and 16 nm, respectively, by means of XRD and TEM measurements. All catalysts owned weak and intermediate Lewis acid sites that increased slightly with increasing the Ni amount and the Al content. In the liquid phase hydrogenation of t,t,c‐1,5,9‐cyclododecatriene over Ni/MCM‐41, the catalytic activity was parallel to the Ni content and enhanced slightly with the acid amount of the catalysts. Consequently, it was proposed that the Ni metallic sites contributed the major effect to the catalytic activity while the Lewis acid sites promoted a small but significant influence on the catalytic performance. It is noteworthy that all 15Ni/MCM‐41 catalysts exhibited remarkably higher activity than that of the conventional 15Ni/SiO₂ catalyst.     

Synthesis and characterization of indium and thallium immobilized on isonicotinamide‐functionalized mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides

Two highly ordered isonicotinamide (INA)‐functionalized mesoporous MCM‐41 materials supporting indium and thallium (MCM‐41‐INA‐In and MCM‐41‐INA‐Tl) have been developed using a covalent grafting method. A surface functionalization method has been applied to prepare Cl‐modified mesoporous MCM‐41 material. Condensation of this Cl‐functionalized MCM‐41 with INA leads to the formation of MCM‐41‐INA. The reaction of MCM‐41‐INA with In(NO₃)₃ or Tl(NO₃)₃ leads to the formation of MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts. The resulting materials were characterized using various techniques. These MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts show excellent catalytic performance in the selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides. Finally, it is found that the anchored indium and thallium do not leach out from the surface of the mesoporous catalysts during reaction and the catalysts can be reused for seven repeat reaction runs without considerable loss of catalytic performance.     

Synthesis and Characterization of Amino-functionalized Meso-porous Silicate MCM-41 for Removal of Toxic Metal Ions

Amino-functionalized MCM-41 has been prepared by grafting amino containing functional groups onto mesoporous silicate MCM-41 and characterized by powder X-ray diffraction, N2 adsorption/desorption measurement, SEM, FT-IR, thermogravimetry and elemental analysis to confirm the ordered mesoporous structure and the functionalization of the amino groups. Sorption behavior for 18 metal ions on this sorbent has been studied and discussed.     

Synthesis of Highly ordered Large Size Mesoporous Silica and Effect of Stabilization as Enzyme Supports in Organic Solvent

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｔｅｃｈｎｉｑｕｅｆｏｒｅｎｖｉｒｏｎｍｅｎｔｐｒｏｔｅｃｔｉｏｎｈａｓｂｅ ｃｏｍｅｉｎｃｒｅａｓｉｎｇｌｙｉｍｐｏｒｔａｎｔ .Ｔｈｅｃｌｅａｒｂｉｏｄｅｃｏｍｐｏｓｉ ｔｉｖｅｍｅｔｈｏｄｓｈａｖｅｂｅｅｎｎｏｔｅｄｉｎｒｅｃｅｎｔｙｅａｒｓ ,ａｎｄｐｅｒｏｘｉｄａｓｅｓ(ｈｅｍｅｅｎｚｙｍｅ)ｈａｖｅｂｅｅｎｗｉｄｅｌｙｕｔｉｌｉｚｅｄｉｎｓｏｍｅａｐｐｌｉｃａｔｉｏｎｓｓｕｃｈａｓｄｅｐｏｌｙｍｅｒｉｚａｔｉｏｎｏｆｌｉｇｎｉｎｏｒｃｏａｌ[1,2 ] ,ａｎｄｔｈｅｎ…     

An XPS study of microporous and mesoporous titanosilicates

In this contribution we report on an XPS study of microporous and mesoporous titanosilicates, in particular microporous titanium silicalite TS‐1, ordered mesoporous Ti‐MCM‐41 and [Ti]‐MCM‐41 and amorphous mesoporous silica–titania (MST) catalysts. Our aim was to obtain both photoemission and x‐ray‐excited Auger data for Ti species on these catalysts and use them in a Ti Wagner plot to rationalize the dependence of the local electronic structure on the atomic environment. Isolated Ti(IV) species coordinated to four and six oxygen anions and segregated TiO₂ clusters were detected on all catalysts by a curve‐fitting procedure of Ti 2p, O 1s and related peaks. The presence of the Si 2p peak excited by an O Kα ghost makes the detection of Ti LMM Auger transitions in mesoporous samples impossible due to the low Ti loadings and its homogeneous distribution in the silica matrix. Small TiO₂ clusters are eventually segregated within the mesopores of the catalysts and not at their external surface. On TS‐1 microporous catalysts with similar Ti loadings to the mesoporous catalysts we were able to detect Ti LMM Auger transitions, and by the Ti Wagner plot we clearly identify the presence of octahedrally coordinated Ti(IV) species. Thus, it is suggested that on TS‐1 the in‐framework (? O)₄Ti species are easily changed to (? O)₄(H₂O)₂Ti species by insertion of water molecules from the atmosphere. Small TiO₂ clusters (diameter <5 nm), eventually present on samples with Ti loading >2 wt.%, are segregated at their external surface and present spectroscopic features similar to (? O)₄(H₂O)₂Ti species. Copyright © 2004 John Wiley & Sons, Ltd.     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

Photocatalytic Degradation of Imidacloprid by Phosphotungstic Acid Supported on a Mesoporous Sieve MCM‐41

Solid catalysts consisting of polyoxometalates (POM) namely phosphotungstic acid H₃PW₁₂O₄₀ (HPW) supported on a mesoporous sieve MCM‐41 have been prepared and characterized by FT‐IR, X‐ray diffraction, nitrogen adsorption and high resolution transmission electron microscope (HRTEM). The HPW/MCM‐41 with different HPW loadings from 10 to 60 wt% possess large specific surface area and rather uniform mesopores. Keggin structure of HPW retains on the prepared composite catalysts. The photocatalytic performance of HPW/MCM‐41 was examined by degradation of a durable pesticide imidacloprid. It is found that the prepared photocatalysts exhibit high activity under irradiation of 365 nm monochromatic light. For 50 mL of imidacloprid (10 mg/L), conversion of imidacloprid using 20 mg of HPW/MCM‐41 with 50 wt% loading level and calcined at 300°C reaches 58.0% after 5 h irradiation.     

Influence of the Synthesis pH on Sorption Behavior of Mesoporous MCM-41 for Toxic Metal Ions

Two samples of mesoporous MCM‐41 have been prepared in acidic and basic conditions with cetyltrimethylammonium bromide (CTAB) as template and characterized by powder X‐ray diffraction and N₂ adsorption‐desorption measurement to confirm the ordered mesoporous structure. Sorption of 21 toxic metal ions on these sorbents has been studied and discussed. The results show that distribution coefficient of Ba(II), Fe(III), Th(IV) on the synthesized MCM‐41 in basic condition and Cu(II), Pb(II), Zr(IV) on the synthesized MCM‐41 in acidic condition has been enhanced.     

Templated Synthesis of Ordered Mesoporous Carbons with Tailored Structures and Morphologies

Due to the excellent biocompatibility and the capability to load and release drugs, ordered mesoporous carbons (OMCs) have been highly prospective and valuable in drug delivery system. In this contribution, synthesis of OMCs with tailored pore sizes from 4.1 to 3.4 nm was achieved by employing SBA‐15 as template and furfuryl alcohol (FA) as carbon precursors. An array of OMCs with controlled structures and morphologies by incipient wetness with FA was analyzed by powder X‐ray diffraction (XRD), nitrogen adsorption, transmission electron microscopy (TEM), and Raman spectroscopy. The resulting carbon replicas retained the hexagonal symmetry of the silica templates SBA‐15 with p6mm space group, although the framework suffered shrinkage in the replicated process. The pore size distribution, uniformity and pore volume of the mesopores in the OMCs were affected by structural properties of the SBA‐15 templates as shown by N₂ sorption and XRD pattern analysis. The process had the advantage that the textural parameters of the obtained OMCs were tunable simply by varying aging temperature of the silica template and the ratio of carbon precursor.     

Catalytic Performance and Dispersion Behavior of Supported Nano‐Amorphous Alloy NiB/MCM‐41 Catalysts Prepared by Chemical Reductive Deposition

Supported nano‐amorphous alloy NiB/MCM‐41 catalysts were prepared by chemical reductive deposition. The as‐prepared catalysts were characterized by XRD, SEM, TEM, EDAX, ICP, and N₂ adsorption‐desorption. The amorphous alloy structure of NiB active sites, mesoporous structure of catalysts, and higher BET area have been proved by the experiments. The catalysts have given excellent catalytic activity and selectivity in the production of 3‐(N‐benzyl)‐amino‐4‐methoxy‐ acetanilide from 3‐amino‐4‐methoxy‐acetanilide and benzaldehyde.     

Epoxidation of cyclohexene with H2O2 over efficient water‐tolerant heterogeneous catalysts composed of mono‐substituted phosphotungstic acid on co‐functionalized SBA‐15

A series of Keggin‐type heteropolyacid‐based heterogeneous catalysts (Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15) were synthesized via immobilized transition metal mono‐ substituted phosphotungstic acids (Co‐/Fe‐/Cu‐POM) on octyl‐amino‐co‐functionalized mesoporous silica SBA‐15 (octyl‐NH₂‐SBA‐15). Characterization results indicated that Co‐/Fe‐/Cu‐POM units were highly dispersed in mesochannels of SBA‐15, and both types of Brønsted and Lewis acid sites existed in Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15 catalysts. Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst showed excellent catalytic performance in H₂O₂‐mediated cyclohexene epoxidation with 83.8% of cyclohexene conversion, 92.8% of cyclohexene oxide selectivity, and 98/2 of epoxidation/allylic oxidation selectivity. The order of catalytic activity was Co‐POM‐octyl‐NH₃‐SBA‐15 > Fe‐POM‐octyl‐NH₃‐SBA‐15 > Cu‐POM‐octyl‐NH₃‐SBA‐15. In order to obtain insights into the role of ‐octyl moieties during catalysis, an octyl‐free catalyst (Co‐POM‐NH₃‐SBA‐15) was also synthesized. In comparison with Co‐POM‐NH₃‐SBA‐15, Co‐POM‐octyl‐NH₃‐SBA‐15 showed enhanced catalytic properties (viz. activity and selectivity) in cyclohexene epoxidation. Strong chemical bonding between ‐NH₃⁺ anchored on the surface of SBA‐15 and heteropolyanions resulted in excellent stability of Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst, and it could be reused six times without considerable loss of activity.     

Cobalt Functionalization of Mesoporous Silica by Organosilane Grafting

MCM‐41, MCM‐48, and SBA‐15 have been functionalized with cobalt by grafting of different organosilane molecules and then calcined to remove the organic moieties. The materials have been characterized by N₂‐sorption, UV‐vis spectroscopy, TPR, ICP‐AES, XRD, and TGA. The nature of the formed cobalt species is dependent upon the number of amine groups in the organosilane molecules, due to the strength of the complexation. Only one amine group in the silane molecule leads to precipitation of Co₃O₄ particles during calcination, while two or more amine groups lead to the formation of cobalt silica at the surface. The obtained amount of precipitated cobalt in the samples is also dependent upon the number of amine groups and on the chain length of the silane molecules and the pore structure on the mesoporous material.     

Synthesis,Characterization and Catalysis of Ce‐MCM‐41

The cerium‐containing MCM‐41 (Ce‐MCM‐41) has been synthesized by direct hydrothermal method. The low‐angle XRD patterns revealed the typical five major peaks of MCM‐41 type hexagonal structures. The interplanar spacing d₁₀₀ = 38.4 Å was obtained that can be indexed on a hexagonal unit cell parameter with a_o = 44.3 Å which was larger than that of pure siliceous MCM‐41 (Si‐MCM‐41). Transmission electron micrograph shows the regular hexagonal array of uniform channel characteristics of MCM‐41. The BET surface area of Ce‐MCM‐41 was 840 m²/g, which is much reduced as compared to that of Si‐MCM‐41, with the pore size of 26.9 Å and mesopore volume of 0.78 cm³/g were measured by nitrogen adsorption‐desorption isotherm at 77 K. Along with the results, the synthesized Ce‐MCM‐41 exhibited a well‐ordered MCM‐41‐type mesoporous structure with the incorporation of cerium. Using Ce‐MCM‐41 as a support, the Rh (0.5 wt%) catalyst exhibited very high activity for the NO/CO reactions.     

Ruthenium Carbenes Supported on Mesoporous Silicas as Highly Active and Selective Hybrid Catalysts for Olefin Metathesis Reactions under Continuous Flow

In the search for a highly active and selective heterogenized metathesis catalyst, we systematically varied the pore geometry and size of various silica‐based mesoporous (i.e., MCM‐41, MCM‐48, and SBA‐15) and microporous (ZSM‐5 and MWW) versus macroporous materials (D11‐10 and Aerosil 200), besides other process parameters (temperature, dilution, and mean residence time). The activity and, especially, selectivity of such “linker‐free” supports for ruthenium metathesis catalysts were evaluated in the cyclodimerization of cis‐cyclooctene to form 1,9‐cyclohexadecadiene, a valuable intermediate in the flavor and fragrance industry. The optimized material showed not only exceptionally high selectivity to the valuable product, but also turned out to be a truly heterogeneous catalyst with superior activity relative to the unsupported homogeneous complex.     

Efficient Liquid‐Phase Oxidation of Diphenylmethane to Benzophenone over Vanadium‐Containing MCM‐41 Catalysts

The liquid‐phase oxidation of diphenylmethane with tert‐butylhydroperoxide has been studied using vanadium‐containing MCM‐41 materials, which were prepared by direct hydrothermal (V‐MCM‐41) and wet impregnation (V/MCM‐41) methods. These catalysts were characterized in detail by ICP‐AES, N₂‐sorption, XRD, FT‐IR, ²⁹Si and ⁵¹V NMR, TPD of ammonia, TPR of hydrogen, and chemisorption of oxygen. Both series of catalyst show good catalytic results, which are attributed to their highly ordered mesoporous structure, large BET surface area as well as the presence of easily accessible vanadium‐oxygen species as active centers in the catalyst. Further, V‐MCM‐41 exhibit superior catalytic activity (based on turnover number) than V/MCM‐41 mainly due to well‐dispersed tetrahedral vanadium‐oxygen species with higher oxidation ability. The effect of reaction parameters, i.e., temperature, time, solvent, etc. were investigated. Catalyst recycling test reveals good stability with only slight extent of leaching during the reaction.     

Catalytic Hydrodechlorination of 1,2,4,5‐Tetrachlorobenzene over Various Supports Loaded Palladium Catalysts

Water pollution by polychlorinated aromatic hydrocarbons has always been a global issue. In this work, we reported a synthesis of supported palladium catalysts Pd/C, Pd/CeO₂, Pd/SBA‐15, Pd/ZrO₂,Pd/SiO₂, and Pd/Al₂O₃ as well as their catalytic activities on hydrodechlorination (HDC) of 1,2,4,5‐tetrachlorobenzene (TeCB). These Pd catalysts were characterized by Brunauer‐Emmett‐Teller (BET) specific surface area, Transmission electron microscopy (TEM), X‐ray diffraction (XRD), energy Dispersive X‐ray Fluorescence (EDXRF), CO‐chemisorption, and H2‐temperature programmed reduction (H2‐TPR) analysis. Pd/C, Pd/CeO₂ and Pd/SBA‐15 catalysts showed relatively high catalytic activities. The catalytic activities were associated with dispersion of Pd, metal surface area, and reaction temperature, etc.     

Nanocomposite with Polypyrrole Encapsulated within SBA‐15 Mesoporous Silica: Preparation and Its Electrochemical Application

The nanocomposite with polypyrrole (PPy) confined in ordered mesoporous silica SBA‐15 channels was synthesized by in situ electropolymerization. X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, N₂ adsorption/desorption, and FT‐IR studies indicated that the nanocomposite has the well‐ordered hexagonal structures and PPy was in situ polymerized into the channels instead of the outer surface of SBA‐15. Furthermore, the PPy/SBA‐15 nanocomposite was used as an electrode modifier. We found that the nanocomposite‐modified electrode exhibited good electrocatalytic activities for hydroquinone oxidation where PPy chains could facilitate the electron transfer between molecular sieves and electrode surface. Three dihydroxybenzene isomers (hydroquinone, catechol and resorcinol) have been successfully detected at PPy/SBA‐15 modified electrode by preconcentration of the analyte.