Lead post-mortem intake in human bones of ancient populations by (109)Cd-based X-ray fluorescence and EDXRF

In this work we measured the lead concentration in human bones of Middle Age by means of a portable X-ray fluorescence system based on ¹⁰⁹Cd radioactive source. The detection system consists on a Ge hyperpure detector. This system, conceived for in vivo Pb analysis in bone, is portable, non-destructive and is based on lead K lines detection.

The analysed bones are part of two collections of bones both from the end of Middle Age and submitted for some years to a lead polluted burial environment. The bones of one collection were buried initially on the soil in a convent, in Lisbon (Portugal) and further on, kept in a lead coffin for around 100 years. The second collection contains bones buried permanently on the soil around an old church on the south of Portugal. This place became a parking car for around 20 years.

In this work we studied the distribution of Pb in cortical bone, and trabecular regions from the outside surface to the inner part of the bone and the results are compared with the obtained ones by energy dispersive X-ray fluorescence (EDXRF).

The obtained values present a strong contamination of Pb in spongy bones kept in the lead coffin with concentrations ranging from 250 to 350 μg Pb/g bone mineral, and 4 to 7 μg Pb/g bone mineral for bones buried in the soil. Good agreement was observed between the results obtained by the two techniques.     

A new methodology involving stable isotope tracer to compare simultaneously short- and long-term selenium mobility in soils

A better understanding of Se fate in soils is required for different environmental issues, such as radioactive waste management or soil fertilization procedures. In these contexts, the mobility and speciation of Se have to be studied at both short and long terms after Se inputs. Here, we present a new methodology to monitor simultaneously the reactivity of added (isotopic enriched tracers) and ambient Se at trace level in soils by high-performance liquid chromatography inductively coupled plasma mass spectrometry (ICP-MS) following specific extractions. To do so, the collision/reaction cell of the ICP-MS instrument and the interference corrections were optimized to measure reliably the four major Se isotopes. To exemplify the method capabilities, the behaviors of added ⁷⁷Se(IV) and ambient Se were followed up in two soils submitted to an ageing process during 3 months. The solid/liquid distribution of added Se reached a steady state after 1 month while its speciation and distribution among soil solid phases were still changing after 3 months. The results clearly demonstrate that slow processes are involved in Se retention and transformation in soils. The usual short-term experiments (<1 month) performed after Se addition are thus not suitable for long-term risk assessment. Interestingly, the behavior of added Se tended to that of ambient Se, suggesting that ambient Se would be useful to infer the fate of Se input over long time scales.

Selenium speciation analysis at trace level in soils

This paper describes the development of an analytical methodology to determine speciation of selenium present in soils at trace level (μg kg(-1)). The methodology was based on parallel single extractions and high performance liquid chromatography hyphenated to inductively coupled plasma mass spectrometry (HPLC-ICPMS). Two complementary chromatographic separations were used to confirm Se species identity. Different extractants, selected on the basis of sequential extraction schemes, were compared. Ultrapure water, 0.1 molL(-1) phosphate buffer (KH(2)PO(4)/K(2)HPO(4)) at pH 7 and 0.1 molL(-1) sodium hydroxide extractants were finally chosen owing to their efficiency in extracting Se and compatibility with Se species stability. These extractants allow also assessing respectively water-soluble Se (i.e. the most mobile Se fraction), exchangeable Se (i.e. sorbed onto soil component surface) and Se bound to soil organic matter. This methodology gives thus information on Se mobility related to its distribution in soil with preservation of original Se speciation. Detection limits range from 3 to 29ng(Se)L(-1) and from 0.1 to 10 μg(Se)kg(-1), allowing determination of Se species concentrations in extracts from soils containing native Se at trace level. The methodology was applied to three soils with total Se concentrations between 210 and 1560 μg(Se)kg(-1).     

Evaluation of a combined fractionation and speciation approach for study of size-based distribution of organotin species on environmental colloids

Results relating to the first original application of an analytical approach combining asymmetric flow field-flow fractionation (As-Fl-FFF) with multi-detection and chemical speciation for determination of organotins in a landfill leachate sample are presented. The speciation analysis involved off-line head-space solid-phase microextraction (HS-SPME)–gas chromatography with pulsed-flame photometric detection (GC–PFPD) performed after three consecutive collections of five different fractions of interest from the As-Fl-FFF system and cross-flow part (assumed to be representative of the <10 kDa phase). After 0.45 μm filtration and without preconcentration before fractionation and speciation analysis, limits of detection (LOD) were 4–45 ng (Sn) L⁻¹ in the sample, with relative standard deviations (RSD) of 3–23%. The As-Fl-FFF fractionation of this sample enables characterization of two distinct populations—organic-rich and inorganic colloids with gyration radius up to 120 nm. Total Sn and mono and dibutyltins (MBT and DBT) appear to be distributed over the whole colloidal phase. Tributyl, monomethyl, monooctyl, and diphenyltins (TBT, MMT, MOcT, and DPhT) were also detected. Quantitative speciation analysis performed on the two colloidal populations and in the <10 kDa phase revealed concentrations from 130 ± 10 (MMT) to 560 ± 50 ng (Sn) L⁻¹ (DPhT).     

Single walled carbon nanotube length determination by asymmetrical-flow field-flow fractionation hyphenated to multi-angle laser-light scattering

Asymmetrical flow field-flow fractionation (AFlFFF) hyphenated to multi-angle laser-light scattering (MALS) was evaluated in order to determine single walled carbon nanotube (SWCNT) length distribution. Fractionation conditions were investigated by examining mobile phase ionic strength and pH, channel components and cross-flow rate. Ammonium nitrate-based mobile phase with 10(-5)molL(-1) ionic strength and pH 6 allows the highest sample recovery (89±3%) to be obtained and the lowest loss of the longest SWCNT. A cross-flow rate of 0.9mLmin(-1) leads to avoid any significant membrane-sample interaction. Length was evaluated from gyration radius measured by MALS by comparing SWCNT to prolate ellipsoid. In order to validate the fractionation and the length determination obtained by AFlFFF-MALS, different SWCNT aliquots were collected after fractionation and measured by dynamic light scattering (DLS). AFlFFF is confirmed to operate in normal mode over 100-2000nm length. MALS length determination after fractionation is found to be accurate with 5% RSD. Additionally, a shape analysis was performed by combining gyration and hydrodynamic radii.     

Accurate determination of the length of carbon nanotubes using multi-angle light scattering

We have prepared a kind of molecularly imprinted nano-porous sensing film for the adsorption of melamine. It consists of a graphite electrode impregnated with paraffin and modified with melamine, chitosan, silver nanoparticles and polyquercetin by employing an electrochemical method. The film displays excellent and highly selective sorption of melamine in the 3-dimensional porous nanomaterial, and this was applied to the determination of melamine in dairy products. The electrode responds linearly to melamine in the concentration range of 1?×?10^?8 to 9?×?10^?7?M, with a detection limit of 1.3?×?10^?9?M (at 3??) in real samples, and with recoveries in the range of 99 to 102%. The surface structure and composition of the sensor was characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, infrared spectroscopy, and electrochemical techniques. The interaction between the porous film and melamine was also studied by using hexacyanoferrate (III) as an electrochemical indicator.

Optimisation of asymmetrical flow field flow fractionation for environmental nanoparticles separation

The fractionation of natural nanoparticles by Asymmetrical Flow Field Flow Fractionation (As-Fl-FFF) was optimised by considering the following operating conditions: ionic strength, surfactant concentration and crossflow rate. The method performances such as fractionation recovery and fractionation efficiency were evaluated on a stable solution of colloidal-size natural inorganic particles. The online multi-detection by ultraviolet/visible spectrophotometer (UV) and multi-angle laser light scattering (MALLS) provided the monitoring of the sample during the separation and the evaluation of the fractionation efficiency. The lowest ionic strength and surfactant concentrations (i.e. 10(-3)molL(-1) NH(4)NO(3) and 3x10(-4)molL(-1) SDS) allowed to obtain the highest sample recovery and lowest loss of the largest particles. The crossflow rate was investigated in order to avoid significant membrane-sample interaction. The applicability of the fractionation in optimised conditions was evaluated on a natural soil leachate, which was filtrated with different filter cut-offs. Filtration efficiency was stressed by the decrease of the large unfractionated particle influence in the void volume. For the first time, robust operating conditions were proposed to well size-fractionate and characterize soil nanoparticles within a single multi-detection analysis.