镍钼杂多酸制备NiMo/γ-Al2O3催化剂及硼、钴或镍改性氧化铝的影响（英文）

A hydrotreating NiMo/γ-Al2O3 catalyst(12 wt% Mo and 1.1 wt% Ni) was prepared by impregnation of the support with the Anderson-type heteropolyoxomolybdate(NH4)4Ni(OH)6Mo6O18.Before impregnation of the support,it was modified with an aqueous solution of H3BO3,Co(NO3)2,or Ni(NO3)2.The catalysts were investigated using N2 adsorption,O2 chemisorption,X-ray diffraction,UV-Vis spectroscopy,Fourier transform infrared spectroscopy,temperature-programmed reduction,temperature-programmed desorption,and X-ray photoelectron spectroscopy.The addition of Co,Ni,or B influenced the Al2O3 phase composition and gave increased catalytic activity for 1-benzothiophene hydrodesulfurization(HDS).X-ray photoelectron spectroscopy confirmed that the prior loading of Ni,Co or B increased the degree of sulfidation of the NiMo/γ-Al2O3 catalysts.The highest HDS activity was observed with the NiMo/γ-Al2O3 catalyst with prior loaded Ni.     

镍钼杂多酸制备NiMo/γ-Al_2O_3催化剂及硼、钴或镍改性氧化铝的影响(英文)

A hydrotreating NiMo/γ-Al2O3 catalyst(12 wt% Mo and 1.1 wt% Ni) was prepared by impregnation of the support with the Anderson-type heteropolyoxomolybdate(NH4)4Ni(OH)6Mo6O18.Before impregnation of the support,it was modified with an aqueous solution of H3BO3,Co(NO3)2,or Ni(NO3)2.The catalysts were investigated using N2 adsorption,O2 chemisorption,X-ray diffraction,UV-Vis spectroscopy,Fourier transform infrared spectroscopy,temperature-programmed reduction,temperature-programmed desorption,and X-ray photoelectron spectroscopy.The addition of Co,Ni,or B influenced the Al2O3 phase composition and gave increased catalytic activity for 1-benzothiophene hydrodesulfurization(HDS).X-ray photoelectron spectroscopy confirmed that the prior loading of Ni,Co or B increased the degree of sulfidation of the NiMo/γ-Al2O3 catalysts.The highest HDS activity was observed with the NiMo/γ-Al2O3 catalyst with prior loaded Ni.     

Additive effects of alkaline-earth metals and nickel on the performance of Co/γ-Al_2O_3 in methane catalytic partial oxidation

Nano-sized γ-alumina (γ-Al2O3) was first prepared by a precipitation method. Then, active component of cobalt and a series of alkaline- earth metal promoters or nickel (Ni) with different contents were loaded on the γ-Al2O3 support. The catalysts were characterized by N2 adsorption-desorption, X-ray diffraction (XRD) and thermogravimetry analysis (TGA). The activity and selectivity of the catalysts in catalytic partial oxidation (CPO) of methane have been compared with Co/γ-Al2O3, and it is found that the catalytic activity, selectivity, and stability are enhanced by the addition of alkaline-earth metals and nickel. The optimal loadings of strontium (Sr) and Ni were 6 and 4 wt%, respectively. This finding will be helpful in designing the trimetallic Co-Ni-Sr/γ-Al2O3 catalysts with high performance in CPO of methane.     

Enhanced catalytic performance for direct synthesis of dimethyl ether from syngas over a La2O3 modified Cu-ZrO2/γ-Al2O3 hybrid catalyst

A series of hybrid catalysts were made by physically mixing Cu-ZrO 2 and γ-Al 2 O 3,for former it was modified with different loadings of La 2 O 3 prepared by co-precipitation method.The catalysts were characterized by BET,XRD,N 2 O-adsorption,EXAFS,H 2-TPR,NH 3-TPD techniques and evaluated in the synthesis of dimethyl ether from syngas.The results show that La 2 O 3 promoted catalysts displayed a significantly better catalytic performance compared with Cu-ZrO 2 /γ-Al 2 O 3 catalyst in CO conversion and DME selectivity,and the optimum catalytic activity was obtained when the content of La 2 O 3 was 12 wt%.The characterizations reveal that high copper dispersion,facile reducibility of copper particles and appropriate amount of acidic sites are responsible for the superior catalytic performance.     

Effect of ultrasonic irradiation and /or halogenation on the catalytic performance of γ-Al2O3 for methanol dehydration to dimethyl ether

Dimethyl ether(DME) is amongst one of the most promising alternative,renewable and clean fuels being considered as a future energy carrier.In this study,the comparative catalytic performance of the halogenated γ-Al 2 O 3 prepared from two halogen precursors(ammonium chloride and ammonium fluoride) is presented.The impact of ultrasonic irradiation was evaluated in order to optimize both the halogen precursor for the production of DME from methanol in a fixed bed reactor.The catalysts were characterized by SEM,XRD,BET and NH 3-TPD.Under reaction conditions where the temperature ranged from 200 to 400 ℃ with a WHSV = 15.9 h-1was found that the halogenated catalysts showed higher activity at all reaction temperatures.However,the halogenated alumina catalysts prepared under the effect of ultrasonic irradiation showed higher performance of γ-Al 2 O 3 for DME formation.The chlorinated γ-Al 2 O 3 catalysts showed a higher activity and selectivity for DME production than fluorinated versions.     

Study of Dibenzothiophene Adsorption Over Carbon Nanotube Supported CoMo HDS Catalysts

Adsorption properties of dibenzothiophene (DBT) on a CNT (carbon nanotube) support as well as on CoMoS/CNT and CoMoO/CNT catalysts have been studied. Consecutive desorption of adsorbates was measured by TGA. The commonly used carriers AC (activated carbon), γ-Al2O3, and their supported catalysts (CoMoO/AC, CoMoS/AC, CoMoO/γ-Al2O3, CoMoS/γ-Al2O3) were also subjected to analysis for comparison. The acidic properties of the samples were characterized using the NH3-TPD technique.Correlation between the adsorption of DBT and the acidic properties of the catalysts has been established.It was found that the Co-Mo catalysts in the sulfide state adsorbed much more DBT molecules than the corresponding Co-Mo catalysts in the oxide state. The CoMoS/CNT catalyst exhibited very high HDS activity and selectivity, as compared with the CoMoS/γ-Al2O3 catalysts. Based on the BET data and the high hydrogenolysis/hydrogenation selectivity of the CoMoS/CNT, it was deduced that more than 90% of the DBT molecules adsorbed on the CoMoS/CNT with an end-on mode, and the surface of the CoMoS/CNT catalyst was almost fully covered with DBT molecules. Although the AC support had very high surface area and high loading ability, the AC supported CoMoS catalyst showed lower HDS activity,as compared with the CoMoS/γ-Al2O3 catalyst.     

States of Carbon Nanotube Supported Mo-Based HDS Catalysts

The dispersion of the active phase and loading capacity of the Mo species on carbon nanotube (CNT) was studied by the XRD technique. The reducibility properties of Co-Mo catalysts in the oxide state over CNTs were investigated by TPR, while the sulfided Co-Mo/CNT catalysts were characterized by means of the XRD and LRS techniques. The activity and selectivity with respect to the hydrodesulfurization (HDS) performances on carbon nanotube supported Co-Mo catalysts were evaluated. It was found that the main active molybdenum species in the oxide state MoO3/CNT catalysts were MoO2, but not MoO3, as generally expected. The maximum loading before the formation of the bulk phase was lower than 6% (percent by mass, based on MoO3). TPR studies revealed that the active species in the oxide state Co-Mo/CNT catalysts were reduced more easily at relatively lower temperatures in comparison to those of the Co-Mo/γ-Al2O3 catalysts, indicating that the CNT support promoted or favored the reduction of the active species. The active species of a Co-Mo-0.7/CNT catalyst were more easily reduced than those of the Co-Mo/CNT catalysts with Co/Mo atomic ratios of 0.2, 0.35, and 0.5, respectively, suggesting that the Co/Mo atomic ratio has a great effect on the reducibility of the active species. It was found that the incorporation of cobalt improved the dispersion of the molybdenum species on the support, and a phenomenon of mobilization and re-dispersion had occurred during the sulfurization process, resulting in low valence state Mo3S4 and Co-MoS2.17 active phases. HDS measurements showed that the Co-Mo/CNT catalysts were more active than the Co-Mo/γ-Al2O3 ones for the desulfurization of DBT, and the hydrogenolysis/hydrogenation selectivity of the Co-Mo/CNT catalysts was also much higher than those of the Co-Mo/γ-Al2O3. The Co-Mo/CNT catalyst with a Co/Mo atomic ratio of 0.7 showed the highest activity, whereas the catalyst with a Co/Mo atomic ratio of 0.35 had the highest selectivity.     

Methanation of carbon dioxide on Ni/ZrO2-Al2O3 catalysts:Effects of ZrO2 promoter and preparation method of novel ZrO2-Al2O3 carrier

The novel nickel-based catalysts with a nickel content of 12 wt% were prepared with the zirconia-alumina composite as the supports. The new carriers, ZrO2 improved alumina, were synthesized by three methods, i.e., impregnation-precipitation, co-precipitation, and impregnation method. The catalytic properties of these catalysts were investigated in the methanation of carbon dioxide, and the samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscope (XPS), temperature-programmed reduction (TPR) and temperature-programmed desorption (TPD) techniques. The new catalysts showed higher catalytic activity and better stability than Ni/γ-Al2O3. Furthermore, as a support for new nickel catalyst, the ZrO2-Al2O3 composite prepared by the impregnation-precipitation method was more efficient than the other supports in the methanation of carbon dioxide. The highly dispersed zirconium oxide on the surface of γ-Al2O3 inhibited the formation of nickel aluminate-like phase, which was responsible for the better dispersion of Ni species and easier reduction of NiO species, leading to the enhanced catalytic performance of corresponding catalyst.     

Autothermal reforming of methane over Ni catalysts supported over ZrO2-CeO2-Al2O3

Ni catalysts supported on Al2O3, ZrO2-Al2O3, CeO2-Al2O3 and ZrO2-CeO2-Al2O3 were prepared by coprecipitation method, and their catalytic performances for autothermal reforming of methane to hydrogen were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS. The relationship between the structures and catalytic activities of the catalysts was discussed. The results showed that the catalytic activity and stability of the Ni/ZrO2-CeO2-Al2O3 catalyst was better than those of other catalysts with the highest CH4 conversion, H2/CO and H2/COx ratio at 750 ℃. The catalyst showed a little deactivation along the reaction time during its 72 h on stream with the mean deactivation rate of 0.08%/h. The catalytic performance of the Ni/ZrO2-CeO2-Al2O3 catalyst was also affected by reaction temperature, no2 ： nCH4 molar ratio and nH2O ： nCH4 molar ratio. TPR, XRD and XPS measurements indicated that the formation of ZrO2-CeO2 solid solution could improve the dispersion of NiO, and inhibit the formation of NiAl2O3, and thus significantly promoted the catalytic activity of the Ni/ZrO2-CeO2-Al2O3 catalyst.     

Synergetic effect between sulfurized Mo/γ-Al_2O_3 and Ni/γ-Al_2O_3 catalysts in hydrodenitrogenation of quinoline

An evidence for the synergetic effect between the stacked bed of Mo/γ-Al2O3 and Ni/γ-Al2O3 in the hydrodenitrogenation (HDN) reaction of quinoline has been provided in this paper. The synergism factor decreases when the reaction temperature increases (280?340 ?C). The synergetic effect leads to improve the hydrogenation activity for the stacked bed compared with the single Mo/γ-Al2O3 bed, which may be attributed to the generation of hydrogen spillover on the Ni/γ-Al2O3 catalyst.     

Spectroscopic Characterization of Mo-Co-S and Mo-Fe-S Complexes-derived Catalysts for Desulfurization and Denitrification

The characteristic studies, by means of LR, UV-Vis and XPS spectroscopies, of the preparation process of Mo-Co-S and Mo-Fe-S catalysts for HDS and HDN, derived from (NH4)2MoS4-CoCl2 and (NH4)2MoS4-FeCl2 complexes supported on γ-Al2O3, respectively, indicate that the catalytically essential moiety on the surface of the catalysts is dominantly some sulfido-bimetallic species with such a structural unit (M' =Co or Fe), and both Co and Fe, served as promoters, can donate electrons to Mo probably via bridging-S. The nature of active-sites and the mechanism of promotion are discussed according to the results.     

Simultaneous removal of ethanol, acetaldehyde and nitrogen oxides over V-Pd/γ-Al_2O_3-TiO_2 catalyst

V-Pd/γ-Al2O3-TiO2 catalysts with different vanadium contents were prepared by a combined sol-gel and impregnation method. X-ray diffraction (XRD), N2 adsorption-desorption (BET), X-ray photoelectron spectroscopy (XPS) and catalytic removal of ethanol, acetaldehyde and nitrogen oxides at low temperature (<300 ?C) were used to assess the properties of the catalysts. The results showed that the sample with 1wt% vanadium exhibited an excellent catalytic performance for simultaneous removal of ethanol, acetaldehyde and nitrogen oxides. The conversions of ethanol, acetaldehyde and nitrogen oxides at 250 ?C were 100%, 74.4% and 98.7%, respectively. V-Pd/γ-Al2O3-TiO2 catalyst with 1 wt% vanadium showed the largest surface area and higher dispersion of vanadium oxide on the catalyst surface, and possessed a larger mole fraction of V4+ species and unique PdO species on the surface, which can be attributed to the strong synergistic effect among palladium, vanadium and the carriers. The higher activity of V-Pd/γ-Al2O3-TiO2 catalyst is related to the V4+ and Pd2+ species on the surface, which might be favorable for the formation of active sites.     

Cross metathesis of butene-2 and ethene to propene overMo/MCM-22-Al_2O_3 catalysts with different Al_2O_3 contents

A series of 3.0Mo/MCM-22-Al2O3 catalysts with γ-Al2O3 contents in the range of 0-100 wt%were prepared and applied in the metathesis reaction of ethene and butene-2.Addition of γ-Al2O3 did not affect the structure of MCM-22 zeolite as evidenced by XRD and N2 adsorption measurements.It was deduced from TPR experiments that γ-Al2O3 phase favored the formation of polymolybdate or multilayered Mo oxide,while more Al2(MoO4)3 species were generated over MCM-22 zeolites.Alumina content in the support was directly related to the metathesis activity of ethene and butene-2 to propene.Mo species with higher valence(Mo6+or Mo5+)contributed more to the excellent performance of catalyst than metallic Mo.The best catalyst activity and stability was obtained over 3.0Mo/(MCM-22-30%Al2O3)under the reaction condition of 1.0 MPa and 125℃ using N2 as the pretreatment gas.     

Comparing the deactivation behaviour of Co/CNT and Co/γ-Al2O3 nano catalysts in Fischer-Tropsch synthesis

An extensive study of Fischer-Tropsch (FT) synthesis on cobalt nano particles supported on γ-alumina and carbon nanotubes (CNTs) catalysts is reported.20 wt% of cobalt is loaded on the supports by impregnation method.The deactivation of the two catalysts was studied at 220 C,2 MPa and 2.7 L/h feed flow rate using a fixed bed micro-reactor.The calcined fresh and used catalysts were characterized extensively and different sources of catalyst deactivation were identified.Formation of cobalt-support mixed oxides in the form of xCoO yAl2O3 and cobalt aluminates formation were the main sources of the Co/γ-Al2O3 catalyst deactivation.However sintering and cluster growth of cobalt nano particles are the main sources of the Co/CNTs catalyst deactivation.In the case of the Co/γ-Al2O3 catalyst,after 720 h on stream of continuous FT synthesis the average cobalt nano particles diameter increased from 15.9 to 18.4 nm,whereas,under the same reaction conditions the average cobalt nano particles diameter of the Co/CNTs increased from 11.2 to 17.8 nm.Although,the initial FT activity of the Co/CNTs was 26% higher than that of the Co/γ-Al2O3,the FT activity over the Co/CNTs after 720 h on stream decreased by 49% and that over the Co/γ-Al2O3 by 32%.For the Co/γ-Al2O3 catalyst 6.7% of total activity loss and for the Co/CNTs catalyst 11.6% of total activity loss cannot be recovered after regeneration of the catalyst at the same conditions of the first regeneration step.It is concluded that using CNTs as cobalt catalyst support is beneficial in carbon utilization as compared to γ-Al2O3 support,but the Co/CNTs catalyst is more susceptible for deactivation.     

CH_4 reforming with CO_2 for syngas production over La_2O_3 promoted Ni catalysts supported on mesoporous nanostructured γ-Al_2O_3

Nanostructured γ-Al2O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2adsorption-desorption,TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2 g-1and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and O2 to dry reforming feed increased the methane conversion and led to carbon free operation in combined processes.     

Preparation,characterization and hydrodesulfurization performances of Co-Ni2P/SBA-15 catalysts

A series of Co-Ni2P/SBA-15 catalysts with various Co contents, Ni2P contents and P/Ni molar ratios were prepared by impregnating nickel nitrate, diammonium hydrogen phosphate, and then cobalt nitrate into SBA-15 support followed by temperature-programmed reduction in a H2 flow. The catalyst structure was characterized by X-ray diffraction(XRD), high resolution-transmission electron microscopy(HR-TEM)and N2adsorption-desorption techniques and their catalytic performance of the hydrodesulfurization(HDS) of dibenzothiophene(DBT) was evaluated. The effects of Co contents, Ni2 P contents and P/Ni molar ratios on the catalyst structure and HDS of DBT over the Co-Ni2P/SBA-15 catalyst were investigated. The results indicated that the mesoporous structure was mainly maintained and the nickel phosphides were well dispersed in all of the characterized catalysts. The 4Co-25Ni2P/SBA-15(P/Ni = 0.8) catalyst with the Co and Ni2 P contents of 4 wt% and25 wt%, respectively, and the P/Ni molar ratio of 0.8 showed the highest catalytic performance for HDS of DBT. Under the reaction conditions of 380?C and 3.0 MPa, the DBT conversion can reach 99.62%. The HDS of DBT proceeded mainly via the direct desulfurization(DDS)pathway with biphenyl(BP) as the dominant product on all of the catalysts and the BP selectivity was slightly enhanced after the introduction of Co promoters.     

Syngas production by combined carbon dioxide reforming and partial oxidation of methane over Ni/α-Al_2O_3 catalysts

Ni/α-Al2O3 catalysts were found to be active in the temperature range 600 ～ 900℃ for both CO2 reforming and partial oxidation of methane.The effects of Ni loading,reaction temperature and feed gas ratio for the combination of CO2 reforming and partial oxidation of CH4 over Ni/α-Al2O3 were investigated.Catalysts of xwt%Ni/α-Al2O3(x=2.5,5,8 and 12) were prepared by wet impregnating the calcined support with a solution of nickel nitrate.XRD patterns and activity tests have verified that the 5wt%Ni/α-Al2O3 was the most active catalyst,as compared with the other prepared catalyst samples.An increase of the Ni loading to more than 5wt% led to a reduction in the Ni dispersion.In addition,by combining the endothermic carbon dioxide reforming reaction with the exothermic partial oxidation reaction,the loss of catalyst activity with time on stream was reduced with the amount of oxygen added to the feed.     

Effect of composite supports on the methanation activity of Co-Mo-based sulphur-resistant catalysts

The effects of composite supports of CeO2-Al2O3,MgO-Al2O3,TiO2-Al2O3 or ZrO2-Al2O3 on the methanation activity of supported Co-Mo-based sulphur-resistant catalysts were investigated.The catalysts were further characterized by nitrogen adsorption measurement,X-ray diffraction and X-ray photoelectron spectroscopy.The catalyst of 5%CoO-15%MoO3 supported on CeO2-Al2O3,MgO-Al2O3,TiO2-Al2O3 or ZrO2-Al2O3 composite oxides,respectively,showed different catalytic performances of syngas methanation in the presence of hydrogen sulphide as compared with that of the 5%CoO-15%MoO3/Al2O3 catalyst.The Co-Mo/CeO2-Al2O3 catalyst shows the highest methanation activity among the tested catalysts.The enhanced methanation activity may be attributed to the improvement of the dispersion of active metal species and the inhibition of the formation of S6+.     

Metathesis of Butylene-2 and Ethylene to Propylene over 3.0Mo／（Hβ＋γ-Al2O3） Catalysts with Different γ-Al2O3 Contents

A series of 3. OMo/(Hβ γ-Al2O3) samples with γ-Al2O3 contents in the range of 0-100% (mass fraction) was studied by means of XRD, NH3-TPD, TPR and BET determinations for characterizing their structures. The Hβ zeolite structure in the 3.0Mo/Hβ sample can be effectively stabilized by adding some γ-Al2O3 to Hβ zeolite. γ-Al2O3 mainly favors the formation of polymolybdate or multilayered Mo oxide, while Hβ mainly forms the Al2(MoO4)3 species, as evaluated by the TPR technique. When used as the catalyst for the metathesis of butylene-2 and ethylene to propylene, there exists a close correlation between the specific surface area and stability of the catalyst. The specific surface area of the catalyst shows the maximum when (Hβ γ-Al2O3) contains 30%γ-Al2O3, which is in agreement with that of the time needed for the reaction stablization. In the case of maximum surface area, the rate of coke deposition is the minimum.     

Study of Carbon Nanotube Supported Co-Mo Selective Hydrodesulphurization Catalysts for Fluid Catalytic Cracking Gasoline

In this paper, carbon nanotube supported Co-Mo catalysts for selective hydrodesulphurization （HDS） of fluid catalytic cracking （FCC） gasoline were studied, using di-isobutylene, cyclohexene, 1-octene and thiophene as model compounds to simulate FCC gasoline. The results show that the Co-Mo/CNT has very high HDS activity and HDS/hydrogenation selectivity comparing with the Co-Mo/γ-Al2O3 and Co-Mo/AC catalyst systems. The saturation ratio of cyclohexene was lower than 50%, and the saturation ratio of 1,3-di-isobutylene lower than 60% for the Co-Mo/CNT catalysts. Co/Mo atomic ratio was found to be one of the most important key factors in influencing the hydrogenation selectivity and HDS activity, and the most suitable Co/Mo atomic ratio was 0.4. Co/CNT and Mo/CNT mono-metallic catalysts showed lower HDS activity and selectivity than the Co-Mo/CNT bi-metallic catalysts.