Effect of liposome composition on β-blocker interactions studied by capillary electrokinetic chromatography

Liposome capillary electrokinetic chromatography was used to investigate the interactions between three β-blockers of different hydrophobicity and various liposome solutions. The studied β-blockers comprised alprenolol, propranolol, and carvedilol. The composition of the liposome solutions, containing 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, 1,2-dioleoyl-sn-glycero-3-phos-phoethanolamine, 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l -serine, and cholesterol in various molar ratios, was designed by a response surface methodology-central composite design approach. Subsequently, after conducting the liposome capillary electrokinetic chromatography experiments and determining the retention factors from the electrophoretic mobilities of the compounds, and further calculating the distribution coefficients, an analysis of variance was performed. After extracting the statistical models, optimal operational conditions were obtained based on the developed models. To further investigate the interactions between the β-blockers and the liposomes, nanoplasmonic sensing experiments were carried out on two different liposome systems. The overall results demonstrate the strong influence of cholesterol and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l -serine on the distribution coefficients.     

Chiral recognition of dipeptides in phosphatidylcholine aggregates

Enantiodiscrimination of ditryptophan enantiomers (l-Trp-l-Trp and d-Trp-d-Trp, l-Trp-d-Trp and d-Trp-l-Trp) was observed in bio-membrane models, such as micellar aggregates of 1,2-diheptanoyl-sn-glycero-3-phospatidylcholine (DHPC) and multilamellar vesicles of either 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) or 1,2-dimyristoyl-sn-glycero-3-phospatidylcholine (DMPC) by solution ¹H NMR and HR-MAS ¹H NMR, respectively. The attainment of resolved signals, allowed the first detection of enantiodiscrimination at a molecular level, and the identification of the site of chiral recognition and of the interactions and conformations of homo- and heterochiral dipeptides in large-sized aggregates formed by a common component of bio-membranes.     

Fluorescence study on the domain formation of <Emphasis Type="Italic">N</Emphasis>-dodecanoyl-<Emphasis Type="SmallCaps">l</Emphasis>-tryptophan within a liposome membrane

The aggregation behavior of N-dodecanoyl-l-tryptophan within a liposome membrane was investigated by fluorescence spectroscopy. Liposomes with a mean diameter of 100 nm, formed from either 1-2-dilauroyl-sn-glycero-3-phosphocholine, 1-2-myristoyl-sn-glycero-3-phosphocholine, or 1-2-palmitoyl-sn-glycero-3-phosphocholine, were used. Fluorescence measurements indicate that the sodium salt of N-dodecanoyl-l-tryptophan forms domains with the liposome membranes below the main phase transition temperature, T _m. Above T _m, the molecules are homogeneously dispersed in the liquid crystalline state of the membranes.     

Liposome Capillary Electrophoresis of Peptides and Proteins

Liposome capillary electrophoresis (LCE) using unilamellar liposomes composed of the zwitterionic phospholipid 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) as a suspended pseudo stationary phase has been investigated for its capability at separating peptides and proteins in bare fused-silica capillaries. The study has explored different strategies for allowing the liposome suspension to act as a disperse pseudo stationary phase with the ability of modulating selectivity, resolution and separation performance of peptides and proteins in bare-fused silica capillaries. Such strategies comprise the use of capillaries either partially or totally filled with the liposome suspension, whereas the electrolyte solution is liposome-free, or the incorporation of the liposomes into the buffer solution employed for rinsing the capillary and as the background electrolyte. Three synthetic peptides of similar amino acid sequence and four basic standard proteins have been employed as test analytes. Varying the volume of the liposome suspension introduced in the capillary promoted differentiated variations in the migration velocity of the three peptides reflecting their selective interactions with the liposomes. Efficient separation of basic proteins was obtained at pH 7.4 in a bare fused-silica capillary with the electrolyte solution containing 60 μM POPC.     

Covalent conjugation of tetrameric bovine liver catalase to liposome membranes for stabilization of the enzyme tertiary and quaternary structures

Tetrameric bovine liver catalase (BLC) is unstable because of its dissociation into subunits at low enzyme concentrations and the conformational change of the subunits at high temperatures. In this work, for stabilization of BLC, the enzyme was covalently conjugated with liposome membranes composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), cholesterol and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-glutaryl (NGPE). The NGPE, which was responsible for the BLC/membrane coupling, was altered from 0.05 to 0.2 in its liposomal mole fraction f_G. The catalase-conjugated liposome (CCL) with f_G of 0.15 showed the maximum number of the conjugated BLC molecules of 28 per liposome. The reactivity of CCLs to H₂O₂ was as high as that of free BLC at 25 °C in Tris–HCl buffer of pH 7.4. Among the CCLs, the catalyst with f_G of 0.15 was the most stable at 55 °C in its enzyme activity in the buffer because the appropriate number of BLC/liposome covalent bonding prevented the dissociation-induced enzyme deactivation. Furthermore, the CCL showed much higher stability at 55 °C than the free BLC/enzyme-free liposome mixture and free BLC at the low BLC concentration of 340 ng/mL. This was because BLC in the CCL was located in the vicinity of the host membrane regardless of the catalyst concentration, which could induce the effective stabilization effect of the membrane on the enzyme tertiary structure as indicated by the intrinsic tryptophan fluorescence analysis. The results obtained demonstrate the high structural stability of BLC in the CCL system, which was derived from the covalent bonding and interaction between BLC and liposomes.     

温度对Pluronic嵌段共聚物胶束结构的影响

温度对Ｐｌｕｒｏｎｉｃ嵌段共聚物Ｆ１０８、Ｆ６８、Ｐ９４和Ｌ６４胶束结构影响的研究结果表明,随着温度上升,胶束外壳ＰＥＯ链的水化度急剧减小,胶束趋于形成聚集更为密实、尺寸较均匀的球形结构。在较高温度时,胶束内核基本上以ＰＰＯ链为主构成。     

Effect of Increasing Concentration of Each of Three Polar Solvents (1,4-Dioxane, Dimethyl Sulfoxide, N,N-Dimethylformamide) on Changes in the Shape of Polysorbate 20 Micelles

The effect of increasing concentration of each of three polar solvents [0–40 % (v/v) 1,4-dioxane, 0–40 % (v/v) dimethyl sulfoxide (DMSO), and 0–60 % (v/v) N,N-dimethylformamide (DMF)] on changes in the shape of the surfactant polysorbate 20 (Tween 20) micelles in the aqueous, polar solvent, sodium phosphate buffer solutions (pH = 7.2, ionic strength 2.44 mmol·L^?1) were investigated by using small-angle X-ray scattering. The effect of increasing concentration of 1,4-dioxane is that the micelle shape changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 10 and 20 % (v/v) 1,4-dioxane, and then from core–shell disc micelles to core–shell elliptic disc micelles between concentrations of 30 and 40 % (v/v) 1,4-dioxane. The effect of increasing concentration of DMSO is that the micelles changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 0 and 10 % (v/v) DMSO. The effect of increasing concentration of DMF is that it changed the core–shell cylindrical micelles to core–shell disc micelles between concentrations of 30 and 40 % (v/v) DMF. The common effect is that the solvents shortened the height of the micelle, that is, they squashed the micelle. Moreover, the specific effect of 1,4-dioxane is that this solvent squashed and squeezed the micelle.     

Analysis of Amphiphilic Lipids and Hydrophobic Proteins Using Nonresonant Femtosecond Laser Vaporization with Electrospray Post-Ionization

Amphiphilic lipids and hydrophobic proteins are vaporized at atmospheric pressure using nonresonant 70 femtosecond (fs) laser pulses followed by electrospray post-ionization prior to being transferred into a time-of-flight mass spectrometer for mass analysis. Measurements of molecules on metal and transparent dielectric surfaces indicate that vaporization occurs through a nonthermal mechanism. The molecules analyzed include the lipids 1-monooleoyl-rac-glycerol, 1,2-dihexanoyl-sn-glycero-3-phosphocholine, 1,2-dimyristoyl-sn-glycero-3-phosphocholine, and the hydrophobic proteins gramicidin A, B, and C. Vaporization of lipids from blood and milk are also presented to demonstrate that lipids in complex systems can be transferred intact into the gas phase for mass analysis.     

Interfacial and micellar properties of binary mixtures of surfactant and phospholipid in an aqueous medium

Mixed micelles formed by zwitterionic surfactant dimethyldodecylammniopropane sulfonate and short-chain phospholipid 1,2-diheptanoyl-sn-glycero-3-phosphocholine in different proportions in an aqueous medium have been studied physicochemically at an air/water interface and in the bulk by using interfacial tension and pyrene fluorescence intensity measurements, respectively. The critical micellar concentration and free energies of micellization and of interfacial adsorption have been determined. The interfacial study reveals that a mixed monolayer is formed at the air/water interface by the adsorption of surfactant and phospholipid monomers. This has been confirmed by evaluating the interfacial parameters; the maximum surface excess, the minimum area per molecule of a surface-active compound, and the Gibbs surface excess related to surface pressure. The nonideality of mixing, expressed in the terms of the regular solution interaction parameter, #, has negative values over the whole mole fraction range. The negative # values indicate the mutual synergism between the surfactant and phospholipid monomers. The equilibrium distribution of components between micelle and monomer phases was evaluated using a theoretical treatment based on excess thermodynamics quantities evaluated by Motomura's formulation.     

Membrane Permeability and Stability of Liposomes Suspended in Shear Flow

The 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) liposome has been characterized in its stability and membrane permeability to 5(6)-carboxyfluorescein (CF) in the shear flow generated in the cone-and-plate geometry. The CF-containing liposomes (CFLs) were 101–323 nm in the mean diameter D _P as measured with the dynamic light scattering (DLS) method. Adsorption of lipids to the cone-and-plate was observed, which clearly depended on the shear stress applied at the shear rate γ up to 1.5 × 10³ s^?1. The permeability of CFLs with D _P of 101 and 117 nm definitely increased at the maximum γ value where the adsorption was negligible. The permeability coefficient of CF at 40°C in the shear flow was 5.7 times larger than that in the static liquid system. The DLS measurements revealed that the size distribution of CFLs with D _P of 101–189 nm was practically unchanged under the shear stress even at 55°C. The results obtained show that the shear stress can permeabilize the CFL membranes with neither structural collapse nor coalescence.     

Synthesis of Cross‐Linked Polymeric Micelle pH Nanosensors: An Investigation of Design Flexibility

The design flexibility that polymeric micelles offer in the fabrication of optical nanosensors for ratiometric pH measurements is investigated. pH nanosensors based on polymeric micelles are synthesized either by a mixed‐micellization approach or by a postmicelle modification strategy. In the mixed‐micellization approach, self‐assembly of functionalized unimers followed by shell cross‐linking by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC) results in stabilized cRGD‐functionalized micelle pH nanosensors. In the postmicelle modification strategy, simultaneous cross‐linking and fluorophore conjugation at the micelle shell using CuAAC results in a stabilized micelle pH nanosensor. Compared to the postmicelle modification strategy, the mixed‐micellization approach increases the control of the overall composition of the nanosensors. Both approaches provide stable nanosensors with similar pK_a profiles and thereby nanosensors with similar pH sensitivity.

     

Membrane Structure of Substance P. III. Secondary Structure of Substance P in 2,2,2-Trifluoroethanol,Methanol, and on Flat Lipid Membranes Studied by Infrared Spectroscopy

IR data of the neuropeptide substance P ( 1 ) and its synthetic segments des-(Arg¹-Gln⁶)-substance P ( 6 ), des-(Arg¹-Pro⁴)-substance P ( 4 ), des-(Arg¹-Lys³)-substance P ( 3 ), and des-Arg¹-substance P ( 2 ) indicate predominant β-structures in the solid state and α-helical structures in CF₃CH₂OH (amide I band shape analysis). In MeOH, the spectra of 1 suggest a partly helical structure. On membranes prepared from 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, a C-terminal α-helix consisting of 8 or 9 peptide bonds appears to be induced (IR attenuated total reflection studies). Its perpendicular orientation on the membrane is suggested by the dichroic ratios of the amide-I and -II bands. This study is consistent with our CD experiments and lends support to the membrane structure of 1 predicted from the estimated amphiphilic moment, hydrophobic-association constant, and helix length.     

带有可调通道的嵌段共聚物胶束对药物的控制释放

用聚丙烯酸叔丁酯-b-聚乙二醇(PtBA45-b-PEG114)和聚丙烯酸叔丁酯-b-聚4-乙烯基吡啶(PtBA60-b-P4VP80)制备了复合胶束. 该胶束在pH=2.5的酸性水溶液中形成以PtBA为核, PEG和P4VP为壳的稳定球型结构. 在pH=12时, 壳层的P4VP链段变为疏水, 塌缩在PtBA的核上形成内壳, PEG链段继续保持溶解状态, 与成核的PtBA连接并穿过塌陷的P4VP内壳, 形成胶束的冠, 由于PEG处于溶解状态, 其分子链间有比较大的空隙, 可以控制一些小分子通过, 在胶束的表面形成通道. 该通道类似于生物膜的蛋白通道, 可以控制PtBA核与外界进行能量或物质交换的速度. 以布洛芬为模型分子, 负载在胶束内进行药物控制释放研究的结果表明, 胶束表面的通道可以起到明显控制布洛芬释放速度的作用, 并且药物的释放速度与通道在胶束表面的比例成正比.     

Two-Dimensional polymerization of supramolecular assemblies: Synthesis and bilayer polymerization of lipids containing α-methylene-substituted acyl chains

Polymerization of lipid assemblies may be usefully employed to alter the properties of the assemblies. The possible locations of the reactive group in the lipids include (1) the chain terminus, (2) the head group, and (3) near the lipid backbone. The third strategy yields polymerized assemblies which retain their head group functionality and lipid chain motion. We have designed and synthesized new members of this later category by the use of 2-methylene-substituted acyl chains. The main transition temperature (T_m) from gel to liquid crystalline phase of hydrated bilayers of 1-palmitoyl-2-(2-methylene)palmitoyl-sn-glycero-3-phosphocholine ( 1 ) and the disubstituted 1,2-bis(2-methylenepalmitoyl)-sn-glycero-3-phosphocholine ( 2 ) were 33.6 and 25.3°C, respectively. The T_m of the mono-substituted 1-oleoyl-2-(2-methylene)palmitoyl-sn-glycero-3-phosphocholine ( 3 ) bilayers was detected in a range from ?15 to ?10°C by x-ray diffraction. Hydrated bilayers of each individual lipid were successfully polymerized with a water-soluble initiator, azobis(2-amidinopropane) dihydrochloride (AAPD). These results indicate the lipid 2-methylene groups are accessible to the water interface. Thermal polymerization of the mono-substituted lipids in aqueous suspensions with AAPD, yielded oligomers. However the bis-2-methylene PC ( 2 ) was successfully polymerized to yield stabilized crosslinked bilayers. © 1994 John Wiley & Sons, Inc.     

Interactions between local anesthetics and lipid dispersions studied with liposome electrokinetic capillary chromatography

In the case of local anesthetic intoxication, intravenous administration of lipid-based Intralipid dispersion (Fresenius Kabi) can be used for the entrapment of hydrophobic drugs. Our long-term aim is to develop a sensitive, efficient, and non-harmful lipid-based formulation to specifically trap harmful substances. In this study liposome electrokinetic capillary chromatography (LEKC) was used to study the interactions between local anesthetics and Intralipid or liposome dispersions. Intralipid dispersion and extruded liposomes with different concentrations of 1-palmitoyl-2-oleyl-sn-glycerophosphatidylcholine (POPC), phosphatidylglycerol, cardiolipin, cholesterol, oleic acid, and linoleic acid were used as a pseudostationary phase in LEKC and their interactions with lidocaine, prilocaine, and bupivacaine were studied. POPC liposomes containing 1 mol% of palmitoyl-2-[12-[(7-nitro-2-1,3-benzoxadiazol-4-yl)amino]dodecanoyl]-sn-glycero-3-phosphocholine as a fluorescent marker were used for the first time in LEKC connected with laser-induced fluorescent detection in order to calculate the retention factor for anesthetics.     

Core‐stabilized polymeric micelle as potential drug carrier: increased solubilization of taxol

Poly(ethylene glycol‐b‐lactide) possessing a methoxy group at the poly(ethylene glycol) (PEG) chain end and a polymerizable methacryloyl group at the poly(lactic acid) (PLA) chain end (MeO–PEG/PLA–methacryloyl) was prepared by an anionic ring‐opening polymerization of ethylene oxide and DL ‐lactide in tandem manner initiated with a potassium 2‐methoxyethanolate, followed by end‐capping with an excess of methacrylic anhydride. The molecular weight of the obtained polymer was controlled by the initial monomer/initiator ratio, which was confirmed by the combination of gel permeation chromatography and nuclear magnetic resonance analyses. The functionality of the methacryloyl–PLA end was almost quantitative. The MeO–PEG/PLA–methacryloyl (38/35; these numbers in parentheses denote the molecular weights of PEG and PLA segments divided by 100, respectively) formed a core–shell type spherical micelle in aqueous media obtained by a dialysis technique, the cumulant diameter of which was ca. 30 nm with very low polydispersity factor. The methacryloyl group adjacent to the PLA was polymerized in the PLA core of the micelle. The polymerization proceeded thermally with radical initiator and photochemically with photo‐initiator to produce core‐polymerized nanoparticles, which was found by spectroscopic and light‐scattering techniques. Taxol‐incorporated micelles were prepared to entrap Taxol into MeO–PEG/PLA–methyacryloyl block copolymer micelles by the oil/water emulsion method. Copyright © 1999 John Wiley & Sons, Ltd.     

Thermodynamic studies of the binding interactions of surfactin analogues to lipid vesicles Application of isothermal titration calorimetry

Isothermal titration calorimetry was applied for studying the binding interactions of cyclic and linear surfactins with different ionic charge (z= −2 and −3) and lipid chain length (n=14 and 18) to 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidyl-choline (POPC) vesicles in 10mMTris buffer at pH8.5with 150mMNaCl at 25°C. Surfactin analogues interacted spontaneously (ΔG _D ^w→b < 0) with POPC vesicles. The binding reactions were endothermic (ΔH _D ^w→b > 0) and entropy-driven process (ΔS _D ^w→b > 0). Moreover, significant differences in the binding constant values (K) ranging from 6.6·10³ to 9.6·10⁴ M⁻¹ show that cyclic structure and the increase of lipid chain length are favourable on the surfactin binding affinity to POPC vesicles, whereas the rise of the number of negative charges has an opposite effect.     

表面活性剂溶胀胶束：性能及应用

溶胀胶束是表面活性剂胶束增溶其它物质后使胶束膨胀的一种胶束状态,因其能显著提高难溶性物质的溶解度而备受关注。针对近年来对溶胀胶束的研究进展,综述了溶胀胶束的最大增溶量、增溶过程以及增溶后形貌尺寸的变化等问题,总结了影响胶束增溶作用的因素,厘清了溶胀胶束与微乳液的异同,介绍了溶胀胶束的应用,展望了其应用前景与发展方向。     

Liquid chromatography–mass spectrometric determination of plasmalogens in human plasma

A new liquid chromatography–mass spectrometry (LC/MS) method has been developed for the quantitative analysis of plasmalogens in human plasma using a nonendogenous plasmalogen (1-O-1′-(Z)-tricosenyl-2-oleoyl-rac-glycero-3-phosphocholine, PLS 23:0/18:1) as an internal standard. 1-O-1′-(Z)-Tricosenyl glyceryl ether was prepared by reacting lithioalkoxyallyl with 1-iodoeicosane as the key intermediate in the formation of PLS 23:0/18:1. In LC/MS analyses, PLS 23:0/18:1 generated significant fragment ions in positive and negative modes. In positive ion mode, the [M+H]⁺ of PLS 23:0/18:1 yielded unique fragments with cleavages at the sn-1 and sn-2 positions of the glycerol backbone. In negative ion mode, the [M+CH₃COO]⁻ of PLS 23:0/18:1 resulted in characteristic fragmentation at the sn-2 and sn-3 positions. 1-O-1′-(Z)-Hexadecenyl-2-linoleoyl-rac-glycero-3-phosphocholine (PLS 16:0/18:2) and 2-arachidonoyl-O-1′-(Z)-hexadecenyl-rac-glycero-3-phosphocholine (PLS 16:0/20:4) were chemically synthesized as PLS 23:0/18:1. The calibration curves obtained for PLS 16:0/18:2 and PLS 16:0/20:4 were linear throughout the calibration range (0.04–1.60 pmol). The LOD (S/N = 5:1) was 0.008 pmol and the LOQ (S/N = 6:1) was 0.01 pmol for both PLS 16:0/18:2 and PLS 16:0/20:4. Plasma concentrations of PLS 16:0/18:2 and PLS 16:0/20:4 were 4.0 ± 1.3 μM and 3.5 ± 1.2 μM (mean ± SD), respectively, in five healthy volunteers.     

Interfacial and fluorescence studies of mixed-micelle formation by 1,2-diheptanoyl-<Emphasis Type="Italic">sn</Emphasis>-glycero-3-phosphocholine with cationic surfactants

Interfacial, γ, and fluorescence measurements have been performed to evaluate the synergism in mixed cationic and zwitterionic phospholipid systems, viz. dodecyltrimethylammonium bromide plus 1,2-diheptanoyl-sn-glycero-3-phosphocholine (DHPC), tetradecyltrimethylammonium bromide plus DHPC, and hexadecyltrimethylammonium bromide plus DHPC mixtures. From the γ data the maximum surface excess and minimum area per molecule were computed and it was found that the former decreases and the latter increases with the increase in the fraction of cationic component in the binary mixture. Application of regular solution theory demonstrated that strong synergistic interactions are present which increase with the increase in length of the hydrocarbon tail of the cationic surfactant component. These interactions were considerably less in the monolayers than in the mixed micelles. The aggregation number, N _agg, of DHPC shows a significant decrease upon induction of the cationic component and vice versa. The decrease in N _agg is explained on the basis of an increase in the total polarity of the mixed micelles.